GOST 18854-2013

ГОСТ 18854-2013

Rolling bearings. Static load rating

Подшипники качения. Статическая грузоподъемность

Status: Effective - Supersedes. IUS 8-2014

The standard establishes methods for calculating the static load capacity and static equivalent load of rolling bearings, which are made of widely used high-quality hardened bearing steel under the conditions of modern, well-established production, have the usual design and shape of contact rolling surfaces and correspond to the dimensions specified in the relevant standards. The standard does not apply to structures in which the rolling elements work directly on the surface of the shaft or body, unless this surface is equivalent in all respects to the bearing surface, which it replaces

Стандарт устанавливает методы расчета статической грузоподъемности и статической эквивалентной нагрузки подшипников качения, которые изготовлены из широко используемой высококачественной закаленной подшипниковой стали в условиях современного, хорошо налаженного производства, имеют обычную конструкцию и форму контактных поверхностей качения и соответствуют размерам, указанным в соответствующих стандартах. Стандарт не распространяется на конструкции, в которых тела качения работают непосредственно по поверхности вала или корпуса, если только эта поверхность не является эквивалентной во всех отношениях поверхности подшипника, которую она заменяет

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 24

Approved: Federal Agency for Technical Regulation and Metrology, 10/31/2013

SKU: RUSS70874

Price: $237.60




The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.1 Components and assembly units for general engineering applications »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.100 bearings » 21.100.20 Rolling bearings »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.100 bearings » 21.100.20 Rolling bearings »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G0 General rules and regulations for engineering » G02 Norms of calculation and design »


As a Replacement Of:

GOST 18854-94: Rolling bearings. Static lood ratings

The Document References:

GOST 24955-81: Rolling bearings. Terms and definitions

The Document is Referenced By:

GOST 18572-2014: Rolling bearings. Axle box cylindrical roller bearings for rolling stock. Specification

GOST 18855-2013: Rolling bearings. Dynamic load ratings and rating life

GOST 32305-2013: Rolling bearings. Thermal speed rating. Calculation and coefficients

GOST 32769-2014: Rolling bearings. Taper bearing unit for rolling stock axle boxes. Specification

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
Language: English
Price: $57.42
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Technical Regulations of Customs Union, On safety of machines and equipment
Language: English
Price: $110.40
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.
Language: English
Price: $469.26
Buildings and constructions. Method for determining wind loads on the building envelope
Language: English
Price: $88.22
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Language: English
Price: $448.52
Loads and actions
Language: English
Price: $495.00
Erecting cranes. Removable lifting devices and containers. Operation
Language: English
Price: $651.36
Steel and corrosion resistant alloys. Test methods for resistance to intergranular corrosion
Language: English
Price: $246.56
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $727.21
Seismic building design code
Language: English
Price: $531.80
Spatial reinforced concrete structures of roofs and floors. Design requirements
Language: English
Price: $542.77
Concrete and reinforced concrete structures. Key Points
Language: English
Price: $1,932.93
Culverts and drainage systems in permafrost areas. Design rules
Language: English
Price: $883.86
Industrial equipment. General safety requirements
Language: English
Price: $71.53
Three-phase asynchronous motors. General specifications.
Language: English
Price: $100.98
Rules for Development, Production and Application of Membranous Safety Equipment
Language: English
Price: $242.55
Asbestos fabric
Language: English
Price: $105.54

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!