GOST R 8.877-2014
ГОСТ Р 8.877-2014
|
|
The state system of measurement assurance. Measures of electromotive force (standard cells) and measures of direct electrical voltage. Methods of verification
Государственная система обеспечения единства измерений. Меры электродвижущей силы (элементы нормальные) и меры напряжения. Методика поверки
Status: Effective - Introduced for the first time. IUS 11-2015
This standard applies to electromotive force measures based on normal elements with a nominal value of 1 V and voltage measures on Zener diodes with nominal values of 1 and 10 V, used as working standards of the 1st, 2nd and 3rd category and measurement tools accuracy classes from 0.0002 to 0.02, in accordance with GOST 8.027, and establishes the method of their primary and periodic calibration. The standard does not apply to secondary standards. The verification interval is one year
Настоящий стандарт распространяется на меры электродвижущей силы на основе нормальных элементов с номинальным значением 1 В и меры напряжения на стабилитронах с номинальными значениями 1 и 10 В, применяемые в качестве рабочих эталонов 1-го, 2-го и 3-го разряда и рабочих средств измерения классов точности от 0,0002 до 0,02, в соответствии с ГОСТ 8.027, и устанавливает методику их первичной и периодической поверки. Стандарт не распространяется на вторичные эталоны. Межповерочный интервал составляет один год
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
7/10/2014
SKU: RUSS70915
The Product is Contained in the Following Classifiers:
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
The Document References:
GOST 12.2.091-2002: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 13646-68: Glass mercury thermometers designed for precise measurements
GOST 1954-82: Measures of electromotive force standard cells
GOST 22261-94: Measuring instruments for electrical
GOST 28498-90: Liquid-in-glass thermometers
GOST 29322-2014: Standard voltages
GOST 30679-99: Standard platinum resistance thermometers of the first and second grades. General technical requirements
GOST 6651-2009: State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods
GOST 8.027-2001: State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of direct electrical voltage and electromotive force
GOST 8.395-80: Standard measurement conditions for calibration
GOST 8.558-2009: State system for ensuring the uniformity of measurement. State verification schedule of measuring devices of temperature.
GOST R 51233-98: State system for the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. General requirements
GOST R 51350-99: Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements
GOST R 8.625-2006: State system for ensuring the uniformity of measurements. Platinum, copper and nickel resistance thermometers. General technical requirements and test methods
GOST R 8.736-2011: State system for ensuring the uniformity of measurements. Multiple direct measurements. Methods of measurement results processing. Main principles
GOST R 8.764-2011: State system for ensuring the uniformity of measurements. State and verification schedule for means of measuring electrical resistance
PR 50.2.006-94: Procedure for calibration of measurement equipment
The Document is Referenced By:
GOST 8.061-2024: State System for Ensuring Uniformity of Measurements. Verification schemes. Content and construction
GOST R 8.685-2009: State system of ensuring the uniformity of measurements. Diode slideback voltmeters. Verification methods
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.