GOST 14140-81
ГОСТ 14140-81
|
|
Basic norms of interchangeability. Position tolerances of bore axes for fasteners
Основные нормы взаимозаменяемости. Допуски расположения осей отверстий для крепежных деталей
Status: Effective
The standard applies to parts of machines and devices that are connected by bolts, screws, studs and other fasteners and in which the axis of the holes for fasteners are parallel, and sets tolerances for the location of the axes of the through smooth and threaded holes for fasteners. The standard does not apply to parts for which there are no requirements for interchangeability and the collection of which is ensured by joint processing of holes in the paired parts to be joined.
Стандарт распространяется на детали машин и приборов, которые соединяются болтами, винтами, шпильками и другими крепежными деталями и у которых оси отверстий для крепежных деталей расположены параллельно, и устанавливает допуски расположения осей сквозных гладких и резьбовых отверстий для крепежных деталей. Стандарт не распространяется на детали, к которым не предъявляются требования взаимозаменяемости и собираемость которых обеспечивается путем совместной обработки отверстий в парных соединяемых деталях.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
4/30/1981
SKU: RUSS70945
The Product is Contained in the Following Classifiers:
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.1 General design issues piping valves (TPA) »
8.1.2 Interchangeability and other design requirements »
Standards for pipe fittings (TPA) »
13. Standards for basic components and parts of injection molding machines »
13.2 Fasteners »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.020 Characterization and design of mechanisms, instruments and equipment »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.020 Characterization and design of mechanisms, instruments and equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G12 Tolerances and fits »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Tolerances and landings. Surface cleanliness »
As a Replacement Of:
GOST 14140-69: Tolerances for position of axles of holes for fasteners
The Document References:
GOST 24642-81: Basic norms of interchangeability. Tolerances of form and position. Basic terms and definitions
The Document is Referenced By:
GOST 10264-82: Light signaling fittings
GOST 10272-77: Double entry centrifugal pumps. Specification
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 14901-93: Moulds for the manufacture of industrial rubber articles
GOST 16162-85: Standard reducers. General specifications
GOST 18514-73: End caps for rolling bearing blocks. Technical requirements
GOST 20772-81: Connecting devices for technical means for fuelling, pumping, loading-unloading, transport and storage of raw oil and petroleum products. Types, basic parameters and sizes. General technical requirements
GOST 21242-75: Flat or pin contact terminals of electrical equipment. Main dimensions
GOST 21467-81: Vehicle airborne equipment shock absorbers. Types, main characteristics, dimensions and technical requirements
GOST 22472-87: Dies for a sheet-metal stamping
GOST 22790-83: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General specifications
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 22961-78: Fixing lugs of all-cast steel and iron moulding boxes. Construction and dimensions
GOST 23118-78: Structural metalwork. General specifications
GOST 23301-78: Universal readjustable dies for element-by-element stamping. Technical requirements
GOST 23751-86: Printed circuit boards. Basic parameters of structure
GOST 24444-87: General assembly and technological requirements
GOST 24839-2012: Structural steelwork. Layout of holes in rolled shapes. Dimensions
GOST 24839-81: Structural steelwork. Lay-out of holes in rolled shapes. Dimensions
GOST 25570-82: Hatch covers of tank for petroleum products. Types, main parameters and dimensions
GOST 26082-84: Shipboard machines and foundations. Tolerances of mounting dimensions
GOST 26270-84: Vent flanges. Types and basic dimensions
GOST 26957-97: Variators with wide-angle belt pulleys. General specifications
GOST 27358-87: Press moulds for manufacturing of plastic items
GOST 28187-89: Basic norms of interchangeability. Deviations of form and position. General requirements for methods of measurements
GOST 28759.5-90: Flanges of vessels and apparatuses
GOST 30222-95: Cone variable speed drives. General specifications
GOST 31.0151.01-90: Universal and special-purpose setters
GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements
GOST 31.211.41-93: Parts and assembly units of collapsible fixtures for assembly and welding
GOST 31592-2012: Machine reducers. General specifications
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST 34070-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Technical requirements
GOST 34937-2023: Riveted connections for railway cars. Technical requirements
GOST 8592-79: Rotating electrical machines. Mounting and connecting dimensions. Tolerances and control methods
GOST R 50056-92: Basic norms of interchangeability. Depended tolerances of form, position and coordinating sizes. Bases of application
GOST R 50891-96: Machine reducers. General specifications
GOST R 53429-2009: Printed circuit boards. Basic parameters of structure
GOST R 54086-2010: Pressure regulators. General specifications
GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements
GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements
GOST R 55756-2013: Integrated system of general technical requirements. Electronic components. General technical requirements
GOST R 57797-2017: Hydraulic jack-pullers. General technical requirements
OST 26-01-1298-81: Flange of vessels and apparatuses made of titanium. Types, Design and dimensions. Strength and integrity calculation procedure.
OST 26-01-49-82: Assembling units and pipeline details for working pressure of 32 MPa (320 kgf/cm2). General specifications.
OST 36-141-87: free metal Flange for plastic pipes for Pnom. to 1.0 MPa. Specifications.
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
RD 22-207-88: Lifting machines. General requirements and production standards
SP 470.1325800.2019: Steel structures. Work Rules
TU 102-533-89: A set of structures on a building without a crane with arched span of 12, 15 and 18 m
VSN 361-85: Installation of Process Equipment on Foundations
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.