GOST R 50776-95
ГОСТ Р 50776-95
|
|
Alarm systems. Part 1. General requirements. Section 4. Code of practice
Системы тревожной сигнализации. Часть 1. Общие требования. Раздел 4. Руководство по проектированию, монтажу и техническому обслуживанию
Status: Effective - Introduced for the first time. IUS 8-1995
This standard establishes the requirements that must be met in the design, installation, commissioning, testing, operation and maintenance of automatic and manual, foot alarm systems (systems, security, fire and security alarms) used to ensure the safety of people and property. The standard does not apply to remote centers. The standard does not apply to systems and complexes designed for facilities that are equipped and protected under special rules or requirements approved in the prescribed manner.
Настоящий стандарт устанавливает требования, которые должны соблюдаться при проектировании, монтаже, наладке, испытаниях, эксплуатации и техническом обслуживании автоматических и ручных, ножных систем тревожной сигнализации (систем, охранной, охранно-пожарной сигнализации), применяемых для обеспечения безопасности людей и имущества. Стандарт не распространяется на удаленные центры. Стандарт не распространяется на системы и комплексы, предназначенные для объектов, оснащаемых и охраняемых по специальным нормам или требованиям, утвержденным в установленном порядке
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
5/22/1995
SKU: RUSS70979
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
V Social Security »
2 Safety requirements »
2.6 Safety at home »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.8 Regulation, automatics and telemechanics »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.320 Alarm and warning systems »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.320 Alarm and warning systems »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P7 Regulation, automatics and telemechanics »
P77 Devices and equipment for telemetry, telecontrol and telealarm »
The Document References:
GOST 18322-78: Equipment maintenance and repair system. Terms and definitions
GOST 20911-89: Technical diagnostics. Terms and definitions
GOST 30109-94: Wooden doors. Test methods for the breaking resistance
GOST R 50658-94: Alarm systems. Part 2. Requirements for intruder alarm systems. Section 4. Ultrasonic Doppler detectors for use in buildings
GOST R 50659-94: Alarm systems. Part 2. Requirements for intruder alarm systems. Section 5. Microwave Doppler detectors for use in buildings
GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General
GOST R 50777-95: Alarm systems. Part 2. Requirements for intruder alarm systems. Section 6. Passive infra-red detectors for use in buildings and open sites
GOST R 50862-2005: Safes and strong rooms. Requirements and methods of tests for resistance to burglary and fire
GOST R 50941-96: Booth for the defence. General technical requirements and methods of testing
GOST R 51053-97: Safes locks. Requirements and test methods for resistance to criminal opening without lock breakage and to burglary
GOST R 51072-2005: Protection doors. General technical requirements and test methods for resistance to burglary, bullet and fire
GOST R 51110-97: Equipment for bank protection. General technical requirements
GOST R 51111-97: Equipment for bank protection. Acceptance rules and test methods
GOST R 51112-97: Equipment for bank protection. Bullet-proof requirements and test methods
GOST R 51113-97: Equipment for bank protection. Requirements for resistance to burglary and test methods
GOST R 51136-2008: Protective laminate glass. General specifications
GOST R 51136-98: Protective laminate glass. General specifications
GOST R 51186-98: Alarm sonic passive glass break detectors for use in buildings. General technical requirements and methods of tests
GOST R 51222-98: Equipment for bank protection. Venetian blinds. General specifications
GOST R 51224-98: Equipment for bank protection. Doors and manholes. General specifications
GOST R 51241-2008: Access control units and systems. Classification. General technical requirements. Test methods
GOST R 51241-98: Access control systems and units. Classification. General requirements. Methods of tests
GOST R 51242-98: Mechanical protective constructions and electromechanical protective constructions for doorways and windows ventings. Technical requirements and test methods for breaking resistance
GOST R 51558-2000: Television systems of security. General technical requirements and test methods
GOST R 51558-2008: Security television means and systems. Classification. General technical requirements. Test methods
GOST R 52434-2005: Active infra-red detectors. General technical requirements and test methods
GOST R 52435-2005: Technical means of intruder alarm systems. Classification. General technical requirements and test methods
GOST R 52436-2005: Control equipment of intruder and intruder-fire alarm systems. Classification. General technical requirements and test methods
GOST R 52437-2005: Equipment for bank protection. Deposit and personal safes. General specifications
GOST R 52502-2005: Venetian blinds-rollets. General specifications
GOST R 52551-2006: Guard and security systems. Terms and definitions
GOST R 52582-2006: Looks for protective designs. Requirements and test methods for resistance to criminal open without lock breakage and to burglary
GOST R 52650-2006: Combined microwave infra-red intrusion detectors for rooms. General technical requirements and test methods
GOST R 52651-2006: Microwave intrusion detectors for perimeters. General technical requirements and test methods
GOST R 52933-2008: Capacitance intrusion detectors for rooms. General technical requirements and test methods
GOST R 53560-2009: Intruder alarm systems. Power supply units. Classification. General technical requirements. Test methods
GOST R 53702-2009: Alarms guarding surface vibration detectors for blocking of structures and safes. General technical requirements and test methods
GOST R 53704-2009: Complex and integrated security systems. General technical requirements
GOST R 54126-2010: Warning devices for intruder alarm systems. Classification. General technical requirements and test methods
RD 25.952-90: Automatic fire extinguishing, fire, burglar and security alarm systems. Procedure for technical design assignment development
RD 78.143-92: Security alarm systems and sets elements of technical reinforcement of sites, design standards
RD 78.145-93: Guiding document systems and complexes of security, fire and security and fire alarm rules for execution and acceptance of work
RD 78.146-93: Guidelines for Technical Supervision of the Design and Installation of Security Alarm Systems
RD 78.147-93: Common requirements to technical strengthening and alarm equipment of guarded objects
RD 78.148-94: Guideline Paper Protective Glazing Classification, Test Methods, and Application
RD 78.36.003-2002/MVD Rossii: Engineering and technical strength. Security equipment. Requirements and design standards for the protection of objects from criminal attacks
SNiP 11-01-2003: Instructions on the order of development, coordination, approval and composition of project documentation for the construction of enterprises, buildings and structures
SNiP 3.01.04-87: Project acceptance for operation after construction
SNiP 3.05.06-85: Electrical devices
SNiP 3.05.07-85: Automated systems
SP 11-110-99: Code of standards on design and construction Designer’s supervision over construction of building and facilities
The Document is Referenced By:
GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General
GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General
GOST R 51241-98: Access control systems and units. Classification. General requirements. Methods of tests
GOST R 51242-98: Mechanical protective constructions and electromechanical protective constructions for doorways and windows ventings. Technical requirements and test methods for breaking resistance
GOST R 51558-2000: Television systems of security. General technical requirements and test methods
GOST R 52551-2006: Guard and security systems. Terms and definitions
GOST R 52551-2016: Protection and security systems. Terms and definitions
GOST R 53704-2009: Complex and integrated security systems. General technical requirements
GOST R 53705-2009: Complex security systems. Stationary metal detectors for apartments. General technical requirements. Test methods
GOST R 54101-2010: Means of automation and control systems. Means and systems of safety. Service and regular maintenance
GOST R 54832-2011: Alarms are guarding point magnetic contact. General requirements and test methods
GOST R 54906-2012: Complex security systems. Environmental security and ecological safety guaranteed design. General technical requirements
R 063-2017: Guidelines. Inspection of objects protected or taken under the protection of units of private security forces of the National Guard of the Russian Federation
R 071-2017: Recommendations Technical facilities security facilities. Symbols for graphic elements of technical security equipment, access control and management systems, CCTV systems
R 072-2018: Recommendations The procedure for the implementation of the basic routine maintenance work on the transmission systems of notifications of central security points of the private security units of the national guard of the Russian Federation
R 076-2018: Guidelines. False alarms of technical means of security alarms and methods of dealing with them
R 078-2019: Guidelines. Engineering and technical strength and equipping with technical means of protection of objects and places of residence and storage of property of citizens taken under centralized protection by units of private security of the national guard of the Russian Federation
R 081-2019: Guidelines. The selection and use of technical means of protection to protect the cultural heritage of the Russian Federation from criminal attacks
R 085-2019: Guidelines. Rules for the installation and maintenance of technical safety equipment at facilities guarded (taken under protection) by units of private security of the national guard of the Russian Federation, as well as the procedure for monitoring their implementation
R 78.36.004-99: Recommended Practice for Using Fire Alarm Systems to Protect Dwelling Units. Typical Solutions
R 78.36.010-2000: Engineering and technical protection of non-telephone objects
R 78.36.011-2000: Organization of work of points of centralized protection
R 78.36.018-2011: Safety guide on nuclear energy use. Unified control procedures of base materials (semi-products), weld joints and build-ups of equipment and pipelines of nuclear energy plants. Dye penetrant inspection.
R 78.36.022-2012: Use of radio-wave and combined detectors for increase of detection capacity and interference protection. Guidance manual
R 78.36.031-2013: About the order of inspection of objects, apartments and MHIG taken under centralized security
R 78.36.032-2013: Engineering and technical fortification and equipment with technical means of protection of objects, apartments and MHIG, taken under centralized protection units of private security. Part 1
R 78.36.032-2014: Engineering and technical fortification and equipment with technical means of protection of objects, apartments and MHIG, taken under centralized protection units of private security. Part 2. Apartments and MHIG
R 78.36.039-2014: Technical means of object security systems. Designations conventional graphic elements of technical means of protection, access control systems, security television systems
R 78.36.043-2014: Selection and application of door blocks. Classification, methods of installation and strengthening of the structure. Guidelines
R 78.36.044-2014: Methodological manual for the selection and use of security surface sound detectors for blocking glazed structures of enclosed spaces
R 78.36.051-2015: Typical design solutions for equipping technical facilities of objects of various categories protected by private security police units. Guidelines
RD 25.03.001-2002: Guard and security systems of objects. Terms and definitions
RD 78.36.002-2010: Recommendations. Technical facilities of safety systems. Graphical symbols of technical security equipment elements, access control systems and closed-circuit television systems
RD 78.36.003-2002/MVD Rossii: Engineering and technical strength. Security equipment. Requirements and design standards for the protection of objects from criminal attacks
RD 78.36.004-2005: Recommendations for Technical Supervision of Design, Erecting Works, and Commissioning of Object Technical Security Equipment
RD 78.36.005-2005: Recommendations on the procedure for inspecting secure properties
RM 78.36.001-99: Engineers' and Electricians' Guide to Security Alarm and Fire Alarm Systems
RM 78.36.002-99: Procedure for Inspection of Facilities to be Placed Under Security. Procedural Manual
SP 262.1325800.2016: Container yard and terminal devices in industrial and transport manufacture. Terms of design and construction
SP 285.1325800.2016: Football stadiums. Desing rules
STA 25.03.02-2004: Combined security system
TR 205-09: Technical recommendations on the design of anti-terrorism security systems and integrated security of high-rise and unique buildings
TSN 31-312-98: Local construction normatives. Bank buildings
VNP 001-01: Industry-Specific Design Standards. Buildings for Territorial Main Administrations, National Banks, and Clearing Centers of the Russian Federation Central Bank
VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
