GOST R 54317-2011

ГОСТ Р 54317-2011

Launching and technical complexes of space-rocket complexes. Safety requirements

Комплексы стартовые и технические ракетно-космических комплексов. Требования безопасности

Status: Effective - Introduced for the first time

This standard establishes the requirements for the safety of launch and technical systems that are part of the rocket and space systems and their components, units and systems. The standard applies to: - launch complexes; - technical complexes; - refueling equipment; - protective equipment; - mounting and docking equipment; - service equipment; - equipment to provide compressed gases; - thermostat equipment; - equipment management process operations, control and information; - launchers; - transport and installation equipment; - facilities; - technical systems. This standard is applied by all enterprises involved in the creation of complexes, regardless of their departmental subordination and organizational-legal form: - in the development, manufacture (including installation and testing) and operation of the complexes that are part of the rocket-space complexes, as well as their equipment; - in the development of rules and evidence base of conformity assessment, in assessing the compliance of complexes and equipment, as well as the process of operation of complexes and equipment to the established mandatory requirements

Настоящий стандарт устанавливает требования к безопасности стартовых и технических комплексов, входящих в состав ракетно-космических комплексов и их составных частей, агрегатов и систем. Стандарт распространяется на: - стартовые комплексы; - технические комплексы; - заправочное оборудование; - защитное оборудование; - монтажно-стыковочное и перегрузочное оборудование; - обслуживающее оборудование; - оборудование обеспечения сжатыми газами; - оборудование термостатирования; - оборудование управления технологическими операциями, контроля и информации; - пусковые установки; - транспортно-установочное оборудование; - сооружения; - технические системы. Настоящий стандарт применяется всеми предприятиями, участвующими в создании комплексов, независимо от их ведомственного подчинения и организационно-правовой формы: - при разработке, изготовлении (включая монтаж и испытания) и эксплуатации комплексов, входящих в состав ракетно-космических комплексов, а также их оборудования; - при разработке правил и доказательной базы оценки соответствия, при оценке соответствия комплексов и оборудования, а также процесса эксплуатации комплексов и оборудования установленным обязательным требованиям

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 33

Approved: Federal Agency for Technical Regulation and Metrology, 5/5/2011

SKU: RUSS70989

Price: $423.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 49 Aircraft and space technology »

ISO classifier » 49 Aircraft and space technology » 49.100 Ground handling and maintenance equipment »

National standards » 49 AVIATION AND SPACE TECHNOLOGY » 49.100 Ground handling and maintenance equipment »


The Document is Replaced With:

GOST R 54317-2021: Launch complexes and technical rocket and space complexes. Safety requirements

The Document References:

Federal Law 184-FZ: About technical regulation

GOST 10227-86: Jet fuels

GOST 12.0.003-74: Dangerous and harmful production effects. Classification

GOST 12.0.004-90: Organization of training for labor safety. General rules

GOST 12.0.005-84: Occupational safety standards system. Metrological support of occupational safety. General

GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements

GOST 12.1.002-84: Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.006-84: Occupational safety standards system. Electromagnetic fields of radio frequencies. Permissible levels at work-places and requirements for control

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.008-76: Occupational safety standards system. Biological safety. General requirements

GOST 12.1.010-76: Explosion safety. General requirements

GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements

GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.

GOST 12.1.023-80: Noise. Determination methods of stationary machine noise characteristics values

GOST 12.1.029-80: Means and methods of defense from noise. Classification

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.1.038-82: Occupational safety standards system. Electric safety. Maximum permissible values of pick-up voltages and currents

GOST 12.1.041-83: Fire and explosion safety of combustible dusts

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12.1.045-84: Occupational safety standards system. Electrostatic fields. Tolerance levels and methods of control at working places

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements

GOST 12.2.007.2-75: Occupation safety standards system. Power transformers and reactors. Safety requirements

GOST 12.2.007.3-75: Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v

GOST 12.2.007.4-75: Cabinets for switchgear and control gear and unitized transformer substations

GOST 12.2.016.5-91: Compressor equipment

GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements

GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements

GOST 12.2.037-78: Fire engineering. Safety requirements

GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements

GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements

GOST 12.2.058-81: Requirements for color of crane components dangerous in exploitation

GOST 12.2.061-81: Occupational safety standards system. Industrial equipment. General safety requirements to working places

GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements

GOST 12.2.125-91: On-land cable equipment

GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements

GOST 12.3.005-75: Painting works

GOST 12.3.006-75: Occupational safety standards system. Operation of water supply and sewerage systems. General safety requirements

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 12.3.020-80: Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety

GOST 12.3.032-84: Occupational safety standards system. Electric installation works. General safety requirements

GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance

GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 12.4.034-2001: Individual respiratory protective devices

GOST 12.4.034-85: Occupational safety standards system. Means for individual protection of breathing organs. Classification and marking

GOST 12.4.041-2001: Occupational safety standards system. Fil tering respiratory protective equipment. General requirements

GOST 12.4.094-88: Occupational safety standards system. Method for determination of dynamical characteristics of human body under vibration action

GOST 12.4.124-83: Occupational safety standards system. Means of static electricity protection. General technical requirements

GOST 12.4.154-85: Occupational safety standards system. Screening devices for protection from power frequency fields. General technical requirements. Basic parameters and dimensions

GOST 14192-96: Cargo marking

GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 17216-2001: Industrial cleanliness. Grades of liquids purity

GOST 17433-80: Industrial purity. Compressed air. Grades of contamination

GOST 17770-86: Manual machines

GOST 19005-81: The means of the provision of the rocket and rocket-space technology items protection from the static electricity. General requirements to the metallization and earthing

GOST 19433-88: Dangerous goods. Classification and marking

GOST 2.104-2006: Unified system for design documentation. Basic inscriptions.

GOST 2.106-96: Unified system for design documentation. Text documents

GOST 2.109-73: Unified system for design documentation. Basic requirements for drawings

GOST 2.111-68: Standards monitoring

GOST 2.114-95: Unified system for design documentation. Specifications

GOST 2.118-73: Unified system for design documentation.

GOST 2.119-73: Preliminary design

GOST 2.120-73: Unified system of design documentation technical project

GOST 2.316-2008: Unified system for design documentation. Rules for placing of inscriptions, technical data and tables of graphical documents. General principles

GOST 2.316-68: Unified system for design documentation. Rules for placing of inscriptions, technical data and tables on drawings

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents

GOST 20.39.108-85: General requirements complex system. Human factors, inhabitancy and technical aesthetics requirements. Nomenclature and order of choice

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 21480-76: Man-machine system Semigraphics General ergonomic requirements

GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements

GOST 21753-76: Man -machine system control levers

GOST 21786-76: Man-machine system. Sound signalling devices for non-voice communication. General ergonomic requirements

GOST 21829-76: Man-machine system. Coding of visual information. General ergonomic requirements

GOST 21889-76: Man-machine system. Operator's arm-chair. General ergonomic requirements

GOST 21958-76: Man-machine system. Operator's rooms and cabins. General ergonomic requirements for operators relative position

GOST 22269-76: Man-machine system Operator workplace layout of workplace elements General ergonomic requirements

GOST 22613-77: Man-machine system. Rotary switches and commutators. General ergonomic requirements

GOST 22614-77: «Man-machine» system. Key-actuated and push-button switches and commutators. General ergonomic requirements

GOST 22615-77: «Man-machine» system. Fumbler switches and commutators. General ergonomic requirements

GOST 23000-78: Man-machine system. Control consoles. General ergonomic requirements

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 26043-83: Vibration. Dynamic characteristics of stationary machines. General

GOST 26342-84: Means of alarm, fire and alarm-fire systems. Types, basic parameters and dimensions.

GOST 26887-86: Platforms and ladders for civil engineering work. Specifications

GOST 27321-87: Demountable tubular scaffold for construction works. Specification.

GOST 27372-87: Travelling cradles for constructional works. Specifications

GOST 27990-88: Means of alarm, fire and alarm-fire systems. General technical requirements

GOST 28028-89: Industrial purity. Hydraulic drives. General requirements and norms

GOST 28259-89: Voltage operations made at power plants. Main requirements

GOST 3.1103-82: Unified system for technological documentation. Basic inscriptions

GOST 3.1116-79: Unified system of technological documentation. Norm control

GOST 3.1120-83: Unified system of technological documentation. General rules for presentation of labour safety requirements in technological documentation

GOST 30331.3-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against electric shock

GOST 30331.8-95: Electrical installations of buildings. Part 4. Protection for safety. Applisation of protective measues for safety. Measures of protection against electric shock

GOST 30703-2001: Non-destructive testing. Safety measures for leakage testing. General requirements

GOST 30869-2003: Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics

GOST 4.188-85: Product-quality index system. Means for guarding, fire and guarding fire signalization. Nomenclature of indices

GOST 6331-78: Industrial and medical liquid oxygen

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 8313-88: Technical ethylcellosolve. Specifications

GOST 9238-83: Construction and rolling stock clearance diagrams for the USSR railways of 1520 (1524) mm gauge.

GOST 9293-74: Gaseous and liquid nitrogen. Specifications

GOST EN 1760-1-2004: Safety of machinery. Pressure sensitive protective devices. Part 1. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors

GOST ISO 14123-1-2000: Safety of machinery. Reduction of risks to health from hazardous substances emitted by machinery. Part 1. Principles and technical requirements

GOST ISO 8041-2006: Vibration. Human response to vibration. Measuring instrumentation

GOST ISO 8995-2002: Principles of visual ergonomics. The lighting of indoor work systems

GOST ISO/TO 12100-1-2001: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terms, procedure

GOST ISO/TO 12100-2-2002: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles and technical requirements

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection

GOST R 12.3.047-98: Occupational safety standards system. Fire safety of technological processes. General requirements. Methods of control

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 12.4.208-99: Occupational safety standards system. Hearing protectors. Ear-muffs. General technical requirements. Methods of testing

GOST R 12.4.209-99: Occupational safety standards system. Hearing protectors. Ear-plugs. General technical requirements. Methods of testing

GOST R 12.4.210-99: Occupational safety standards system. Hearing protectors. Ear-muffs attached to an industrial safety helmet. General technical requirements. Methods of testing

GOST R 50559-93: Industrial purity. General requirements for supplying, transporting, storage and feeding of working liquids

GOST R 50571.17-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 48. Choice of protective measures as a function of external influences. Section 482. Protection against fire

GOST R 50571.19-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 443. Protection against overvoltages of atmospheric origin or due to switching

GOST R 50571.3-2009: Low-voltage electrical installations. Part 4-41. Requirements for safety ensuring. Protection against electric shock

GOST R 50632-93: High-strength hydrogen peroxide. Specifications

GOST R 50948-2001: Display means for individual use. General ergonomic requirements and safety requirements

GOST R 50949-2001: Display means for individual use. Methods of measurement and assessment of ergonomic and safety parameters

GOST R 51143-98: Launching and technical complexes of space-rocket complexes. General requirements for tests and acceptance

GOST R 51282-99: Launching and technical complexes technological equipment for rocket-space complexes. Designing and test norms

GOST R 51330.10-99: Electrical apparatus for explosive gas atmospheres. Part 11. Spark-free power line, type i

GOST R 51334-99: Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs

GOST R 51335-99: Safety of machinery. Minimum gaps to avoid crushing of parts of the human body

GOST R 51336-99: Safety of machinery. Emergency stop equipment. Functional aspects. Principles for design

GOST R 51337-99: Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values for hot surfaces

GOST R 51338-99: Safety of machinery. Reduction of risk to health from hazardous substances emitted by machinery. Part 1. Principles and specifications for machinery manufacturers

GOST R 51339-99: Safety of machinery. Safety distances to prevent danger zones being reached by the lower limbs

GOST R 51340-99: Safety of machinery. Basic characteristic of visual and auditory danger signals. Technical requirements and methods for testing

GOST R 51341-99: Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Part 2. Displays

GOST R 51342-99: Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards

GOST R 51343-99: Safety of machinery. Prevention of unexpected start-up

GOST R 51344-99: Safety of machinery. Principles for risk assessment

GOST R 51345-99: Safety of machinery. Interlocking devices associated with guards. Principles for design and selection

GOST R 52543-2006: Hydraulic drives. Safety requirements

GOST R 52797.1-2007: Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 1. Noise control strategies

GOST R 52869-2007: Pneumatic drives. Safety requirements

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R EN 614-1-2003: Safety of machinery. Ergonomic design principles. Part 1. Terms, definitions and general principles

GOST R IEC 60536-2-2001: Classification of electrical and electronic equipment with regard to protection against electric shock. Part 2. Guidelines to requirements for protection against electric shock

GOST R IEC 60950-2002: Safety of information technology equipment

GOST R IEC 61140-2000: Protection against electric shock. Common aspects for installation and equipment

GOST R ISO 12100-1-2007: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terminology, methodology

GOST R ISO 12100-2-2007: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles

GOST R ISO 13849-1-2003: Safety of machinery. Safety-related parts of control systems. Part 1. General principles for design

GOST R ISO 14644-1-2000: Cleanrooms and associated controlled environments. Part 1. Classification of air cleanliness

GOST R ISO 14644-2-2001: Cleanrooms and associated controlled environments. Part 2. Specifications for testing and monitoring to prove continued compliance with ISO 14644-1

GOST R ISO 14644-4-2002: Cleanrooms and associated controlled environments. Part 4. Design, construction and start-up

GOST R ISO 17666-2006: Risk management. Space systems

Manual for SNiP 21-01-97: Fire Prevention

MDS 41-1.99: Recommended Practice for Smoke Protection in the Event of Fire (for SNIP 2.04.05-91*)

NPB 104-03: Designing of fire alarm systems in buildings and structures

NPB 105-03: Determination of categories of rooms, buildings and external installations on explosion and fire hazard

NPB 110-03: The list of buildings, constructions, rooms and equipment subject to protection by automatic extinguishing units and automatic fire alarm

NPB 166-97: Fire engineering. Fire extinguishers. Requirements of exploitation

NPB 59-97: Water and foam fire fighting systems. Fire foam mixers and dose device. Nomenclature of indices. general technical requirements. Test methods

NPB 62-97: Water and foam extinguishing installations. Fire-fighting foam mixers and feeder. Schedule of indicators. General technical requirements. Testing methods

NPB 88-2001*: Fire extinguishing and alarm systems. Norms and design rules

PB 03-273-99: Rules for qualification test of welders and welding production specialists

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-581-03: Codes for installation and safe operation of stationary compressor , air ducts and gas ducts

PB 03-582-03: Design and Safety Operation Regulations for Reciprocating Compressor Operating with Explosive and Hazard Gases

PB 03-583-03: Rules for Development, Production and Application of Membranous Safety Equipment

PB 03-584-03: Rules of design, manufacturing and acceptance of welded steel vessels and apparatuses

PB 03-585-03: Process Pipelines Design and Safe Operation Rules

PB 03-590-03: Regulations for construction, installation, and safe operation of explosion-proof fans

PB 09-592-03: Rules for arrangement and safe operation of refrigerating systems

PB 09-596-03: Safety regulations for using nonorganic liquid acids and alkalis

PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.

PB 10-558-03: Rules of installation and safe operation of elevators

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PB 11-544-03: Safety Rules for Production and Consumption of Air Separation Products

PB 12-529-03: Gas distribution and gas consumption system safety rules. Series 12. Revision 4.

POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations

PPB 01-03: On Approval Of Fire Safety Standards In The Russian Federation

RD 03-613-03: Procedures of use of welding materials during fabrication, installation, repair and modernization of technical systems for hazardous production facilities

RD 03-614-03: Order of welding equipment application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.

RD 03-615-03: Order of welding technologies application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.

RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.

RD 34.20.561-92: Model Guidelines for the Prevention of and Response to Accidents in Electric Equipment of Energy Systems

RST RSFSR 723-84: Occupational safety standards system. Works hazardous. Classification. General requirements

SanPiN 2.2.2/2.4.1340-03: Hygienic requirements for personal electronic computers and work organization

SO 153-34.20.561-2003: Guidelines for Accident Prevention and Accident Response in Electrical Parts of Energy Systems

SP 1.13130.2009: The systems of fire protection. Evacuation ways and exits

SP 3.13130.2009: Systems of fire protection. System of annunciation and management of human evacuation at fire. Requirements of fire safety

SP 4.13130.2009: Fire containment at protected facilities. Requirements to spatial planning and structural solutions

SP 5.13130.2009: Fire protection systems. Automated fire alarm and fire extinguishing installations. Design norms and regulations

ST SEV 4267-83: Protection of Wireline Communications Equipment and Attendant Personnel Against Electromagnetic Fields. Terms and Definitions

The Document is Referenced By:

GOST R 56525-2015: Unmanned spacecrafts. General requirements for transportation

GOST R 58171-2018: Services in railway transport. Requirements for passenger service at railway stations

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!