imgalt

GOST R 55429-2013

ГОСТ Р 55429-2013

Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

Соединения трубопроводов бугельные разъемные. Конструкция, размеры и общие технические условия

Status: Effective - Introduced for the first time. IUS 6-2014

This standard establishes: the design and dimensions of the drag-type detachable joints with a self-sealing ring with an axial stop for process pipelines with nominal diameters from DN 32 to DN 150 plus 450 ° C inclusive; technical requirements for their manufacture; methods of control and testing; requirements for installation and maintenance, ensuring their safety in operation. The standard applies to the detachable joints of technological pipelines intended for the transportation of gaseous, vaporous and liquid media in chemical, petrochemical, oil and gas processing, oil and gas producing enterprises

Настоящий стандарт устанавливает: конструкцию и размеры бугельных разъемных соединений с самоуплотняющим кольцом с осевым упором для технологических трубопроводов с номинальными даиметрами от DN 32 до DN 150 включительно, на номинальное давление от PN 100 до PN 320 включительно и рабочую температуру среды от минус 50 °С до плюс 450 °С включительно; технические требования к их изготовлению; методы контроля и испытаний; требования к монтажу и обслуживанию, обеспечивающие их безопасность при эксплуатации. Стандарт распространяется на бугельные разъемные соединения технологических трубопроводов, предназначенных для транспортирования газообразных, парообразных и жидких сред на химических, нефтехимических, нефте- и газоперерабатывающих, нефте- и газодобывающих предприятиях

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 5/14/2013

SKU: RUSS70990

Price: $558.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Standards for pipe fittings (TPA) » 6. Standards of connecting sizes of piping valves (TPA) » 6.5 Threaded and other connections »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.60 Flanges, couplings and connections »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.60 Flanges, couplings and connections »


The Document References:

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10493-81: Rigid and compensating

GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements

GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers

GOST 10877-76: Preservative oil K-17

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 14068-79: Paste ВНИИ НП-232. Specifications

GOST 14192-96: Cargo marking

GOST 1497-84: Metals. Methods of tension test

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19537-83: Gun grease. Specifications

GOST 19782-74: Paste ВНИИ НП-225. Specifications

GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents

GOST 20072-74: Heat-resistant steel

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 22761-77: Metals and alloys. Brinell hardness test by static action portable hardness meters

GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)

GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 4543-71: Structural alloyed steel

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 977-88: Steel castings. General specifications

GOST R 1.0-2012: Standardization in the Russian Federation. Basic provisions

GOST R 54808-2011: Pipeline valves. Leakage rates of valves.

OST 26-01-136-81: Assembling units of steel pipelines on pressure over 9,81 to 98,1 MPa (over 100 to 1000 kgf/cm2) of complete technological lines. General specifications.

OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.

OST 26-01-86-88: fixed metal seals for vessels and apparatus for pressure over 10 to 100 MPa (100 to 1000 kgf / cm2). Types. Design and dimensions. Technical requirements . Acceptance rules. Control methods.

OST 26-07-1419-76: Forgings, stampings and blanks of rolled metal for pipeline fittings.

PB 03-273-99: Rules for qualification test of welders and welding production specialists

PB 03-440-02: Attestation rules for nondestructive inspection personnel

PB 03-585-03: Process Pipelines Design and Safe Operation Rules

RD 24.207.09-90: Pipe fittings. Temporary anti-corrosion protection. General requirements

RD 26.260.15-2001: The leading document. Positive material identification of the main and welding materials and finished goods.

Safety Guide: Recommendations on arrangement and safe operation of process pipelines

Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products

The Document is Referenced By:

GOST R 55430-2013: Detachable pipe joints. Evaluation of technical condition and methods of testing. Operation safety

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!