GOST R 52338-2005
ГОСТ Р 52338-2005
|
|
Industrial cleanliness. Methods for lubricating and cooling liquids testing
Чистота промышленная. Методы испытаний смазочно-охлаждающих жидкостей
Status: Effective - Introduced for the first time
This standard establishes the test methods for lubricant-coolant (coolant): rapid tests, laboratory and machine tests, production tests. This standard applies to the following classes of coolant: aqueous, forming emulsions in water (coarse dispersions, microemulsions) or transparent solutions based on organic substances, inorganic substances, mixtures of organic and inorganic substances; oil, kinematic viscosity groups in, mm sq. / s, at 50 degrees. C: first - 1-9; the second - 10-20; third -> 20
Настоящий стандарт устанавливает методы испытаний смазачно-охлаждающей жидкости (СОЖ): экспресс-испытания, лабораторно-станочные испытания, производственные испытания. Настоящий стандарт распространяется на следующие классы СОЖ: водные, образующие в воде эмульсии (грубые дисперсии, микроэмульсии) или прозрачные растворы на основе органическиз веществ, неорганических веществ, смеси органических и неорганических веществ; масляные, группы кинематической вязкости у, мм кв./с, при 50 град. С: первая - 1-9; вторая - 10-20; третья - >20
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
5/31/2005
SKU: RUSS71117
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.9 Petroleum products of industrial and domestic consumption, lubricating oils and greases, plastic »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.100 Lubricants, industrial oils and related products »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.100 Lubricants, industrial oils and related products »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10689-75: Soda ash from nepheline raw stock for industrial use. Specifications
GOST 10734-64: Lubricating oils containing additives. Method for determination of detergen potential
GOST 10743-64: Metaphos - 2.5% dust
GOST 11362-96: Petroleum products and lubricants. Neutralization number. Potentiometric titration method
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.3.025-80: Occupational safety standards system. Metal working by cutting. Safety requirements
GOST 1412-85: Flakish graphite cast iron
GOST 14706-78: Diamonds and diamond tools. Terms and definitions
GOST 1583-93: Aluminium casting alloys. Specifications
GOST 1604-71: Nut taps. Design
GOST 16181-82: Diamond grinding wheels
GOST 1628-78: Bronze rods. Specifications
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 1672-80: Solid machine reamers. Types, parameters and dimensions
GOST 17362-71: Mineral oils. Method of determination of saponification number
GOST 18118-79: Abrasive tool. Hardness measurement by sand blasting
GOST 19199-73: Lubricating oils. Method for determination of anticorrosive properties
GOST 19202-80: Abrasive tool. Hardness measurement by ball indentation
GOST 19265-73: Bars and strips out of high-speed steel. Specifications
GOST 19807-91: Wrought titanium and titanium alloys. Grades
GOST 2034-80: Twist drills
GOST 21445-84: Abrasive materials and tools. Terms and definitions
GOST 23.221-84: Products weak resistance assurance. Experimental evaluation of lubricants temperature stability at friction
GOST 24106-80: Nitride bore grinding wheels
GOST 2424-83: Grinding wheels
GOST 2517-85: Crude oil and petroleum products. Methods of sampling
GOST 25961-83: Abrasive tool. Acoustic method of control of physico-mechanical properties
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 2917-76: Oils and additives. Method of test for corrosion influence on metals
GOST 3060-86: Grinding wheels. Unbalanced masses and measurement method
GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
GOST 3647-80: Abrasives. Grain sizing. Graininess and fractions. Test methods
GOST 3882-74: Sintered hard alloys. Types
GOST 4333-87: Petroleum products. Methods for determination of flash and ignition points in open crucible
GOST 4543-71: Structural alloyed steel
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications
GOST 6243-75: Emulsols and pastes. Test methods
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 801-78: Bearing steel. Specifications
GOST 9.085-78: Single corrosion and ageing protection system. Cooling lubricant. Bioresistance test methods
GOST 9490-75: Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
GOST R 1.0-92: State system for standardization of the Russian Federation. Basic principles
GOST R 1.2-92: State system for standardization of the Russian Federation. Procedure for developing state standards
GOST R 50558-93: Industrial purity. Lubricating and cooling liquids. Specifications
GOST R 51779-2001: Industrial cleanliness. Lubricating and cooling liquids in the machining. Terms and definitions
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
