imgalt

GOST R 52779-2007

ГОСТ Р 52779-2007

Polyethylene fittings for gas pipelines. General specifications

Детали соединительные из полиэтилена для газопроводов. Общие технические условия

Status: Not effective - Superseded

The standard covers connecting parts made of polyethylene for gas pipelines transporting combustible gases according to GOST 5542, intended as raw materials and fuels for industrial and domestic use with a maximum operating pressure of MPAs up to 1.2 MPa and operating gas temperatures of up to 40 degrees Celsius Parts are designed to connect elements of gas pipelines, including pipes according to GOST R 50838, butt welding with a heated tool or welding parts with embedded electric heaters.

Стандарт распространяется соединительные детали из полиэтилена для газопроводов, транспортирующих горючие газы по ГОСТ 5542, предназначенные в качестве сырья и топлива для промышленного и коммунально-бытового использования при максимальном рабочем давлении МОР до 1,2 МПа и рабочей температуре газа до 40 град. Цельсия. Детали предназначены для соединения элементов газопроводов, в том числе труб по ГОСТ Р 50838, сваркой встык нагретым инструментом или сваркой деталями с закладными электронагревателями.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 11/19/2007

SKU: RUSS71122

Price: $574.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Construction (Max) » Standards » Other state standards used in construction » 83 Rubber, technical rubber, asbestos and plastic industries »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Defects »

Welding regulations » Main materials » Non-ferrous metals »

Welding regulations » Main materials » Polymers »

Welding regulations » Welding materials » Gases »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.10 Testing and monitoring products of rubber and plastics industry » 4.10.2 Plastic Products »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.45 Plastic fittings »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.45 Plastic fittings »

ISO classifier » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.140 Rubber and plastic products » 83.140.30 Plastic pipes, fittings not for liquids »

National standards » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.140 Rubber and plastic products » 83.140.30 Plastic pipes, fittings not for liquids »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L2 Organic Chemical Products » L26 Plastic products »


The Document is Replaced With:

GOST R 58121.3-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 3. Fittings

The Document References:

Federal Law 184-FZ: About technical regulation

GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 11262-80: Plastics. Tensile strength test method.

GOST 11645-73: Plastics method of determination of melt flow index for thermoplastics

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing

GOST 12.4.121-83: Industrial filtering gas-masks

GOST 12423-66: Plastics. Standard atmospheres for conditioning and testing specimens

GOST 13841-95: Corrugated board boxes for chemical products. Specifications

GOST 14192-96: Cargo marking

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 15139-69: Plastics. Methods for the determination of density (mass density)

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 16338-85: Low-pressure polyethylene. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises

GOST 17811-78: Polyethylene bags for chemical products. Specifications

GOST 22235-76: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations

GOST 2226-88: Paper bags

GOST 24104-2001: Laboratory scales. General technical requirements

GOST 24157-80: Plastic pipes. Method of determination of the resistance to constant internal pressure

GOST 26277-84: Plastics. Preparation of test specimens by machining

GOST 26311-84: Polyolefins. Method of determination of black content

GOST 26359-84: Polyethylene. Method for determination of volatile matters content

GOST 26653-90: Preparation of general cargoes for transportation. General requirements

GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 30090-93: Sacks and fabric for sacks

GOST 5542-87: Natural fuel gases for industrial and domestic use

GOST 5583-78: Industrial and medical gaseous oxygen

GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications

GOST 7229-76: Cables, wires and cords. Method of measurement of electrical resistance of conductors

GOST 8032-84: Preferred numbers and series of preferred numbers

GOST 9293-74: Gaseous and liquid nitrogen. Specifications

GOST 949-73: Small and medium volume steel cylinders for gases for pp ≤ 19.6 MPa (200 kgf/cm2) Specifications

GOST ISO 11922-1-2006: Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Part 1. Metric series

GOST ISO 12162-2006: Thermoplastics materials for pipes and fittings for pressure applications. Classification and designation. Overall service coefficient

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication

GOST R 50838-95: Polyethylene pipes for the supply of gaseous fuel. Specifications

GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions

The Document is Referenced By:

GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications

GOST R 53652.3-2009: Thermoplastics pipes. Method for determination of tensile properties. Part 3. Polyolefin pipes

GOST R 55142-2012: Testing of welded joints of thermoplastic sheets and pipes. Test methods-Requirements

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 55473-2013: Gas distribution systems. Requirements for gas distribution networks. Part 1. Polyethylene gas pipelines

GOST R 56287-2014: Main-line liquefied natural gas turbine locomotives. General technical requirements

GOST R 56290-2014: Gas distribution systems. Requirements to gas distribution networks. Part 3. Renovation

GOST R 58181-2018: Gas distribution systems. Requirements to gas distribution networks. Part 7. Polyethylene gas pipelines laid inside the existing pipeline

GOST R ISO 11413-2014: Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene pipe and an electrofusion fitting

GOST R ISO 11414-2014: Plastics pipes and fittings. Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

GOST R ISO 12176-1-2011: Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Part 1. Butt fusion

MSN 42-01-2011: Gas distribution systems

SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants

SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling

SP 399.1325800.2018: External water supply and sewage systems made of polymer materials. Rules for design and installation

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!