GOST R 55025-2012
ГОСТ Р 55025-2012
|
|
Power cables with plastic insulation for rated voltages from 6 up to and including 35 kV. General specifications
Кабели силовые с пластмассовой изоляцией на номинальное напряжение от 6 до 35 кВ включительно. Общие технические условия
Status: Effective - Introduced for the first time. IUS 11-2013
This standard applies to power cables with plastic insulation, designed for the transmission and distribution of electrical energy in stationary installations for a nominal AC voltage from 6 to 35 kV inclusively with a rated frequency of 50 Hz. The standard establishes the basic requirements for the construction and technical characteristics of cables, their operational properties and methods of control.
Настоящий стандарт распространяется на силовые кабели с пластмассовой изоляцией, предназначенные для передачи и распределения электрической энергии в стационарных установках на номинальное переменное напряжение от 6 до 35 кВ включительно номинальной частотой 50 Гц. Стандарт устанавливает основные требования к конструкциям и техническим характеристикам кабелей, их эксплуатационные свойства и методы контроля
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/27/2012
SKU: RUSS71134
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.060 Electrical Wires and Cables »
29.060.20 Cables »
National standards »
29 ELECTRICAL ENGINEERING »
29.060 Electrical Wires and Cables »
29.060.20 Cables »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E4 Electric cables, wires and cords »
E42 Power and control cables and wires »
The Document References:
GOST 12.2.007.14-75: Cables and cable fittings. Safety requirements
GOST 12177-79: Cables, wires and cords. Methods of construction checking
GOST 12179-76: Cables and wires. Method for the determination of dielectric power factor
GOST 14192-96: Cargo marking
GOST 1497-84: Metals. Methods of tension test
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15845-80: Cables products. Terms and definitions
GOST 16962.1-89: Electrical articles. Test methods as to environments climatic factors resistance
GOST 18690-82: Cables, wires, cord and armature. Marking, packing, carriage and storage
GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics
GOST 22483-77: Copper and aluminum conductors
GOST 23286-78: Cables, wires and cords. Standards for insulation and sheath thickness and voltage tests
GOST 24621-91: Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
GOST 27893-88: Telephone cables. Methods of tests
GOST 28114-89: Cables. Method of measuring partial discharges
GOST 2990-78: Cables, wires and cords
GOST 3345-76: Cables and insulated conductors. Method for the determination of the electric resistance of insulation
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7229-76: Cables, wires and cords. Method of measurement of electrical resistance of conductors
GOST 9.048-89: Unified system of corrosion and ageing protection. Technical items. Methods of laboratory tests for mould resistance
GOST IEC 60332-1-2-2011: Tests on electric and optical fibre cables under fire conditions. Part 1-2. Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame
GOST IEC 60332-1-3-2011: Tests on electric and optical fibre cables under fire conditions. Part 1-3. Test for vertical flame propagation for a single insulated wire or cable. Procedure for determination of flaming droplets/particles
GOST IEC 60332-3-21-2011: Tests on electric and optical cables under fire conditions. Part 3-21. Flame spread of vertically-mounted bunched wires or cables. Category A F/R
GOST IEC 60332-3-22-2011: Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
GOST IEC 60332-3-23-2011: Tests on electric and optical cables under fire conditions. Part 3-23. Flame spread of vertically-mounted bunched wires or cables. Category B
GOST IEC 60754-1-2011: Tests of materials from cables during combustion. Determination of the amount of evolved halogen acid gas.
GOST IEC 60754-2-2011: Tests of materials from cables during combustion. Determination of degree of evolved gases acidity by measuring pH and conductivity.
GOST IEC 60811-1-1-2011: General test methods for insulating and sheathing materials of electric and optical cables. Measurements of thickness and overall dimensions. Tests for determining the mechanical properties
GOST IEC 60811-1-2-2011: Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods
GOST IEC 60811-1-3-2011: Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-3. General application methods. Methods for determining the density. Water absorption tests. Shrinkage test
GOST IEC 60811-2-1-2011: Common test methods for insulating and sheathing materials of electric and optical cables. Part 2-1. Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests
GOST IEC 60811-3-1-2011: Test methods specific to PVC insulating and sheathing compounds of electric and optical cables. Pressure test at high temperature. Test for resistance to cracking
GOST IEC 60811-3-2-2011: Test methods specific to PVC insulating and sheathing compounds of electric and optical cables. Loss of mass test. Thermal stability test
GOST IEC 61034-2-2011: Measurement of smoke density of cables burning under defined conditions. Part 2. Test procedure and requirements.
GOST R 53315-2009: Cable products. Requirements of fire safety
GOST R 53354-2009: Cables and their accessories. Impulse tests
GOST R IEC 60332-1-2-2007: Tests on electric and optical fibre cables under fire conditions. Part 1-2. Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame
GOST R IEC 60332-1-3-2007: Tests on electric and optical fiber cables under fire conditions. Part 1-3. Test for vertical flame propagation for a single insulated wire or cable. Procedure for determination of flaming droplets/particles
GOST R IEC 60332-3-21-2005: Tests on electric and optical cables under fire conditions. Рart 3-21. Flame spread of vertically-mounted bunched wires or cables. Category A F/R.
GOST R IEC 60332-3-22-2005: Tests on electric and optical cables under fire conditions. Рart 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A.
GOST R IEC 60332-3-23-2005: Tests on electric and optical cables under fire conditions. Part 3-23. Flame spread of vertically-mounted bunched wires or cables. Category B
GOST R IEC 60754-1-99: Testing of materials for cable construction during combustion. Determination of the amount of halogen acid gases emitted
GOST R IEC 60754-2-99: Testing of materials for cable construction during combustion. Determination of the degree of acidity of gases emitted by measuring pH and conductivity
GOST R IEC 60811-1-1-98: General test methods for insulating and sheathing materials of electric and optical cables. Measurements of thickness and overall dimensions. Tests for determining the mechanical properties
GOST R IEC 60811-1-2-2006: Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods
GOST R IEC 60811-1-3-2007: Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-3. General application methods. Methods for determining the density. Water absorption tests. Shrinkage test
GOST R IEC 60811-2-1-2006: Common test methods for insulating and sheathing materials of electric and optical cables. Part 2-1. Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests
GOST R IEC 60811-3-1-94: Test methods specific to PVC insulating and sheathing compounds of electric and optical cables. Pressure test at high temperature. Test for resistance to cracking
GOST R IEC 60811-3-2-94: Methods specific to PVC compounds of insulating and sheathing materials of electric cables. Loss of mass test. Thermal stability test
GOST R IEC 61034-2-2005: Measurement of smoke density when burning cables under specified conditions. Part 2. Test method and requirements
SNiP 3.05.06-85: Electrical devices
The Document is Referenced By:
GOST R 58342-2019: Power and control cables for use in electrical installations in explosive atmospheres. General specifications
PNST 167-2016: Cable products for nuclear power plants. General technical requirements
PNST 597-2022: Oil and gas industry. Underwater production systems. Power cables with extruded insulation and cable fittings
PNST 613-2022: Oil and gas industry. Underwater production systems. Electrical systems. General provisions
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
