GOST R ISO 6520-1-2012

ГОСТ Р ИСО 6520-1-2012

Welding and allied process. Classification of geometric imperfections in metallic materials. Part 1. Fusion welding

Сварка и родственные процессы. Классификация дефектов геометрии и сплошности в металлических материалах. Часть 1. Сварка плавлением

Status: Effective - Introduced for the first time. IUS 12-2014

This part of the ISO 6520 standard is fundamental for the classification and description of welding defects. For a more accurate classification of defects, explanations and, if necessary, sketches are provided. Metallurgical defects are not considered. Another defect identification system is possible according to the ISO standard.

Эта часть стандарта ИСО 6520 является основной для классификации и описания дефектов сварки. Для более точной классификации дефектов приводятся пояснения и, при необходимости, эскизы. Металлургические дефекты не рассматриваются. Возможна другая система обозначения дефектов согласно стандарту ISO/TS 17845

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 11/22/2012

SKU: RUSS71156

Price: $584.10


The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

Welding regulations » Welding work »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » welding equipment »

Welding regulations » Welding staff »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Assembly devices »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.40 Welds and welding »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.40 Welds and welding »

The Document is Referenced By:

GOST 23118-2019: Steel building structures. General specifications

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 34196-2017: Electrolyzers for the production of aluminum. General technical conditions

GOST 34664-2020: Thermite-welded railroad rails. Specifications

GOST 34717-2021: Cast side member and bolster cast triaxial bogies for freight wagons. Specifications

GOST 34767-2021: Balance board of three-axle bogies for freight wagons. Specifications

GOST 34769-2021: Cotter beam for bogies of three-axle freight wagons. Technical specifications

GOST 7370-2015: Railway frogs. Specifications

GOST ISO 12932-2017: Welding. Laser-arc hybrid welding of steels, nickel and nickel alloys. Quality levels for imperfections

GOST ISO 13919-1-2017: Welding. Compounds obtained by electron beam and laser welding. Guidance on assessing the quality level for defects. Part 1. Steel

GOST ISO 13919-2-2017: Welding. Compounds obtained by electron-beam and laser welding. A guide to assessing the quality level for defects. Part 2. Aluminum and its alloys

GOST R 50.04.07-2018: Conformity assessment system for the nuclear power use. Conformity assessment in the form of tests. Qualification tests of non-destructive inspection systems

GOST R 50.04.07-2022: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of tests. Attestation tests of non-destructive testing systems

GOST R 50.05.15-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Non-destructive examination. Terms and definitions

GOST R 55682.5-2017: Water-tube boilers and auxiliary installations. Part 5. Workmanship and construction of pressure parts of the boiler

GOST R 55682.6-2017: Water-tube boilers and auxiliary installations. Part 6. Inspection during construction, documentation and marking of pressure parts of the boiler

GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control

GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

GOST R 57181-2016: Thermite welding of rails. Technological process

GOST R 57352-2016: Building aluminium structures. General specifications

GOST R 58031-2017: Site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above. Design and manufacture rules

GOST R 58419-2019: Additive technology. Products made of titanium alloys made by selective electron beam fusion. General specifications

GOST R 58713-2019: Non-destructive testing. Discontinuities in samples used in qualification exams

GOST R 70461-2022: Construction works and typical technological processes. Steel structures made of pipes and closed profiles. Rules and control of installation work

PNST 618-2022: Oil and gas industry. Subsea production systems. Welding and Inspection of Pipeline Welds

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

SDOS-11-2015: Guidelines on the procedure for conducting ultrasonic testing of metal structures of technical devices, buildings and structures

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Seamless hot-deformed steel pipes. Specifications
Language: English
Price: $57.42
Seamless hot-deformed steel pipes. Range of sizes
Language: English
Price: $77.22
Processing equipment and process pipelines
Language: English
Price: $155.43
Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
Language: English
Price: $320.76
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English
Price: $1,478.07
Unified system for design documentation. Diagrams. Kinds and types. General requirements for fulfillment.
Language: English
Price: $121.77
Chemically resistant and heat resistant ceramic wares. The method for determination of heat resistance
Language: English
Price: $34.65
Unified system for program documentation. Types of programs and program documents
Language: English
Price: $55.44
Petroleum products. Method of test for water-soluble acids and alkalies
Language: English
Price: $48.51
Unified system for design documentation. Repair documents
Language: English
Price: $196.02
Chemical production safety passport. General requirements
Language: English
Price: $90.09
Unified system for design documentation. Exploitative documents
Language: English
Price: $296.01
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $137.61
Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus
Language: English
Price: $223.74
Process piping. Standard for the stress, vibration and seismic analysis
Language: English
Price: $879.12
Pipeline valves for nuclear stations. General specifications
Language: English
Price: $1,908.72
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $703.89
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Language: English
Price: $523.71
Fish products. Canned tuna and bonito in water or oil
Language: English
Price: $159.00

YOUR ORDERING MADE EASY! is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!