imgalt

GOST R 8.595-2004

ГОСТ Р 8.595-2004

State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements for procedures of measurements

Государственная система обеспечения единства измерений. Масса нефти и нефтепродуктов. Общие требования к методикам выполнения измерений

Status: Effective

The standard applies to methods for measuring the mass of marketable petroleum and petroleum products in the areas of distribution of state metrological control and supervision, based on: - direct methods of dynamic and static measurements; - indirect methods of dynamic and static measurements; - indirect method based on hydrostatic principle. The standard establishes the basic requirements for methods for performing mass measurements of the product, due to the peculiarities of the mass measurements of the product.

Стандарт распространяется на методики выполнения измерений массы товарной нефти и нефтепродуктов в сферах распространения государственного метрологического контроля и надзора, основанные на: - прямых методах динамических и статических измерений; - косвенных методах динамических и статических измерений; - косвенном методе, основанном на гидростатическом принципе. Стандарт устанавливает основные требования к методикам выполнения измерений массы продукта, обусловленные особенностями измерений массы продукта.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/7/2004

SKU: RUSS71326

Price: $296.01



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

PromExpert » SECTION II. METROLOGICAL » II Measurements » 2 Measurement of mechanical quantities »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T86 Measurement Techniques »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T86 Measurement Techniques » T86.1 Measurement of geometric quantities »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T86 Measurement Techniques » T86.2 Measurement of mechanical quantities »


As a Replacement Of:

GOST R 8.595-2002: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements to procedures of measurements

The Document References:

GOST 12.0.004-90: Organization of training for labor safety. General rules

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.4.137-84: Special leather footwear for protection from petroleum, petroleum products, acids, alkalis, non-toxic and explosive dust

GOST 21534-76: Petroleum The determination of chloride salts content

GOST 2477-65: Petroleum and petroleum products. Method for determination of water content

GOST 2517-85: Crude oil and petroleum products. Methods of sampling

GOST 27574-87: Women’s suits for protection against general industrial pollution and mechanical effects

GOST 27575-87: Men's suites for protection from general occupational pollution and mechanical effects

GOST 29329-92: Balance for static weightings

GOST 30414-96: Weighbridges for weighing of vehicles in motion. General technical requirements

GOST 3900-85: Petroleum and petroleum products. Method for determination of density

GOST 6370-83: Petroleum, petroleum products and additives Methods for determination of mechanical admixtures

GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments

GOST 8.207-76: Direct measurements with multiple observations. Observation data processing methods

GOST 8.346-2000: State system for ensuring the uniformity of measurements. Steel horizontal cylindrical tanks. Calibration methods

GOST 8.570-2000: State system for ensuring the uniformity of measurements. Steel vertical cylindrical tanks. Calibration methods

GOST R 1.0-92: State system for standardization of the Russian Federation. Basic principles

GOST R 1.11-99: State system for standardization of Russian Federation. Metrological expert evaluation of state standards projects

GOST R 1.12-2004: Standardization in the Russian Federation. Terms and definitions

GOST R 1.2-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules for development, taking over, reform and cancellation

GOST R 1.2-92: State system for standardization of the Russian Federation. Procedure for developing state standards

GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication

GOST R 51069-97: Crude petroleum and petroleum products. Determination of density, relative density and API gravity. Hydrometer method

GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements

GOST R 51330.9-99: Electrical apparatus for explosive gas atmospheres. Volume 10. Classification of hazardous areas

GOST R 51858-2002: Crude petroleum. General specifications

GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 8.569-98: State system for ensuring the uniformity of measurements. Vehicle tanks for oil product liquids. Methods of verification

GOST R 8.580-2001: State system for ensuring the uniformity of measurements. Determination and application of precision data in relation to petroleum products tests methods

GOST R 8.595-2002: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements to procedures of measurements

GOST R 8.599-2003: State system for ensuring the uniformity of measurements. Density and volume of oil. The tables of factors for recalculation of density and mass

GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions

GOST R ISO 5725-2-2002: Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method

GOST R ISO 5725-3-2002: Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method

GOST R ISO 5725-4-2002: Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method

GOST R ISO 5725-5-2002: Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method

GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values

MI 1317-2004: State system for ensuring uniformity of measurements. Results and characteristics of the measurement error. Forms of representation. Ways to use during testing of product samples and control over the parameters of product samples and control of their para

MI 1967-89: Recommendation. State system for ensuring uniformity of measurements. The choice of methods and measuring instruments in the development of measurement techniques. General provisions

MI 2153-2004: State System of Measuring Uniformity Provision. Oil density. Requirements to areometer measurement procedures for discounting

PB 03-538-03: Rules of Certifying Electrical Equipment for Explosive Atmospheres

PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation

R 50.1.039-2002: Development, Updating, and Withdrawal of Standards and Guidelines on Standardization, Metrology, Certification, Accreditation, and Cataloging

RD 50-156-79: Guidelines. Determination of the capacity and graduation of reinforced concrete cylindrical tanks with a precast wall with a capacity of up to 30,000 cubic meters by the geometrical method

RMG 43-2001: State system for ensuring the uniformity of measurements. The use of

The Document is Referenced By:

FR 1.29.2009.06689: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement procedure in vertical tanks

GOST 33702-2015: Systems for measuring the quantity and quality of gas condensate, liquefied hydrocarbon gas and a wide fraction of light hydrocarbons. General technical requirements

GOST 34182-2017: Oil and оil рroducts trunk pipeline transportation. Operation and maintenance. General principles

GOST 8.624-2013: State system for ensuring the traceability of measurements. Laboratory water in crude oil analysers. Verification method

GOST R 52304-2005: Sugar beet molasses. Specifications

GOST R 52672-2006: Hydrolysates of starch. Specifications

GOST R 52906-2008: Equipment of the aviation fuelling system. General technical requirements

GOST R 55435-2013: Oil and oil products trunk pipeline transportation. Operation and maintenance. General principles

GOST R 55610-2013: Oil measuring systems. General specifications

GOST R 58404-2019: Filling stations and complexes. Technical Operation Rules

GOST R 8.615-2005: State system for ensuring the uniformity of measurements. The measuring of quantity of taken from bowels oil and oil gas. General metrological and technical requirements

GOST R 8.647-2008: State system for ensuring the uniformity of measurements. Metrological maintenance of quantity definition of taken from site of bowels crude oil and oil gas. Basic principles

GOST R 8.785-2012: State system for ensuring the uniformity of measurements. Mass of hydrocarbon condensate, liquefied hydrocarbon gas and long distillate of light hydrocarbons. General requirement for procedure (methods) of measurements

GOST R 8.786-2012: State system for ensuring the uniformity of measurements. Fuel oil mass. Measurement procedure in horizontal storage tanks by indirect method of static measurements. General metrological requirements

GOST R 8.787-2012: State system for ensuring the uniformity of measurements. Mass of mazut. Measurement of the fuel oil mass in railway tanks. General metrological requirements

GOST R 8.788-2012: State system for ensuring the uniformity of measurements. Mass of mazut. Measurement procedure in vertical storage tanks. General metrological requirements

GOST R 8.822-2013: State system for ensuring the uniformity of measurements. The determination of the corrective factor on get fat capacity carrying oil tank court at measurement of the volume of the oil. Methods of the calculation

MI 2736-2007: Recommendation. State system for ensuring uniformity of measurements. The error rate of the balance of the delivered and received net oil mass of OJSC (LLC) "MN" OJSC "AK Transneft"

MI 2825-2003: Oil quantity and quality ratio measurement system. Metrological and technical design requirements

MI 2837-2003: Oil hand-over and acceptance points metrological and technical support

MI 2893-2004: Recommendation. State system for ensuring uniformity of measurements. Systems for measuring the quantity and quality of oil. Type approval tests. General provisions and organization of work in the system of the main pipeline transport of JSC AK Transneft

MI 2950-2005: Recommendation. State system for ensuring uniformity of measurements. A lot of oil. Methods for performing measurements in horizontal tanks in the system of the main pipeline transport

MI 2951-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in vertical tanks in the system of main pipeline transport

MI 2952-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in railway tanks in the system of main pipeline transport

MI 2953-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in automobile tanks in the system of the main oil pipeline transport

MI 2972-2006: State system of measuring uniformity provision. Petroleum mass. Method of measuring by the system of petroleum quantity and properties measuring system No.1005 JSC ´Shugurovskiy petrochemical plant´

MI 2975-2006: State system of measuring uniformity provision. Petroleum mass. Indirect measuring method of dynamic measurements on the registration point pump station 'Suslovo' JSC 'Uraltransnefteproduct'

MI 3115-2008: Recommendation. State system for ensuring uniformity of measurements. The mass of goods transported by rail. Measurement and accounting of the mass of the cargo in mutual settlements between the shipper and the consignee

MI 3200-2009: Recommendation. GSE. Mass of crude oil. Methods of measuring the system of measuring the amount and parameters of crude oil at the temporary loading point of the Bayandy field at the Chamber of Commerce and Industry Usinskneftegaz OOO Lukoil-Komi

MI 3206-2009: State system for ensuring uniformity of measurements. Systems for measuring the quantity and quality indicators of oil, petroleum products and liquid hydrocarbons. Rules of commissioning. Main provisions

MI 3241-2009: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement technique indirect method of dynamic measurements

MI 3242-2009: State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Methods of measurement in horizontal tanks

MI 3275-2010: State system for ensuring uniformity of measurements. Metrological support for oil products account during transportation via main pipelines system. Main provisions

MI 3295-2010: State system for ensuring uniformity of measurements. The error rates of the balance of the handed over and received oil in JSC AK Transnefteprodukt

MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support

MI 3372-12: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Systems for measuring the quantity and quality of petroleum products. General technical and metrological requirements

MI 3532-2015: State system for ensuring the uniformity of measurements. Recommendations on definition of weight of oil at registration operations with application quantity measures and indicators of oil quality

NA.GNMC.0293-19 MP: Instruction. State system for ensuring the uniformity of measurements. The system for measuring the quantity and indicators of oil at the PSP "Komsomolsky", LLC "RN-Sakhalinmorneftegaz". Verification method

PNST 360-2019: State system for ensuring the uniformity of measurements. Measurements of the amount of oil and associated petroleum gas extracted from the bowels of the earth. General metrological and technical requirements

R 50.2.040-2004: Metrological assurance of oil accounting when transferring via main pipeline system. Basic provisions

R 50.2.062-2008: State system for ensuring uniformity of measurements. Oil produced in the subsoil area. The method of determining the amount

RMG 116-2011: State system for ensuring the uniformity of measurements. Tanks of main oil lines and oil storage depots. Maintenance operations and metrological assurance under operating conditions

RMG 89-2010: State system for ensuring the uniformity of measurements. Acceptance point of oil. Metrological and technical assurance

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Seamless hot-deformed steel pipes. Specifications
Language: English
Price: $57.42
imgalt
Seamless hot-deformed steel pipes. Range of sizes
Language: English
Price: $77.22
imgalt
Processing equipment and process pipelines
Language: English
Price: $155.43
imgalt
Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
Language: English
Price: $320.76
imgalt
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
imgalt
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English
Price: $1,478.07
imgalt
Unified system for design documentation. Diagrams. Kinds and types. General requirements for fulfillment.
Language: English
Price: $121.77
imgalt
Chemically resistant and heat resistant ceramic wares. The method for determination of heat resistance
Language: English
Price: $34.65
imgalt
Unified system for program documentation. Types of programs and program documents
Language: English
Price: $55.44
imgalt
Petroleum products. Method of test for water-soluble acids and alkalies
Language: English
Price: $48.51
imgalt
Unified system for design documentation. Repair documents
Language: English
Price: $196.02
imgalt
Chemical production safety passport. General requirements
Language: English
Price: $90.09
imgalt
Unified system for design documentation. Exploitative documents
Language: English
Price: $296.01
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $137.61
imgalt
Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus
Language: English
Price: $223.74
imgalt
Process piping. Standard for the stress, vibration and seismic analysis
Language: English
Price: $879.12
imgalt
Pipeline valves for nuclear stations. General specifications
Language: English
Price: $1,908.72
imgalt
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $703.89
imgalt
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Language: English
Price: $523.71
imgalt
Fish products. Canned tuna and bonito in water or oil
Language: English
Price: $159.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!