GOST 2517-2012
ГОСТ 2517-2012
|
|
Petroleum and petroleum products. Methods of sampling
Нефть и нефтепродукты. Методы отбора проб
Status: Effective - Supersedes. IUS 6-2014
The standard establishes methods for sampling oil and oil products from tanks, underground storage facilities, oil tankers, rail and road tanks, pipelines, barrels, cans and other means of storage and transportation. The standard does not apply to liquefied gases and petroleum coke delayed coking.
Стандарт устанавливает методы отбора проб нефти и нефтепродуктов из резервуаров, подземных хранилищ, нефтеналивных судов, железнодорожных и автомобильных цистерн, трубопроводов, бочек, бидонов и других средств хранения и транспортирования. Стандарт не распространяется на сжиженные газы и нефтяной кокс замедленного коксования.
Choose Language:
Format: Electronic (pdf/doc)
Page Count: 37
Approved: Federal Agency for Technical Regulation and Metrology,
11/29/2012
SKU: RUSS71382
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
013/2011 TR CU. About requirements to automobile and aviation gasoline, diesel and marine fuel, jet fuel and fuel oil »
Regulations and standards (to ТР ТС ТС 013/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
014/2011 TR CU. Road safety »
Regulations and standards (to TR TS 014/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
030/2012 TR CU. On requirements for lubricants, oils and special fluids »
Regulations and standards (to 030/2012 TR CU) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
045/2017 TR EAEU. On safety of oil prepared for transportation and (or) use »
Regulations and Standards (by 045/2017 TR EAEC) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.2 Testing and control of products of fuel and energy industry »
4.2.2 Oil, oil products and gas »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.080 Petroleum products in general »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.080 Petroleum products in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
B Oil products »
B0 General rules and regulations for oil refining industry »
B09 Test methods. Packaging. Marking »
National Standards for OKSTU »
OIL, PETROLEUM PRODUCTS, GAS »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 2517-85: Crude oil and petroleum products. Methods of sampling
The Document References:
GOST 1.0-2015: Interstate system for standardization. Basic principles
GOST 1.2-2015: Interstate System for Standardization. Interstate standards. Rules for development, taking over, renovation and cancellation
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.4.010-75: Means of individual protection protective mittens
GOST 12.4.034-2001: Individual respiratory protective devices
GOST 12.4.034-2017: Occupational safety standards system. Personal respiratory protection. Classification and labeling
GOST 12.4.111-82: Men's suits for protection against oil and products of oil processing
GOST 12.4.112-82: Women’s suites for protection from oil and oil products
GOST 12.4.124-83: Occupational safety standards system. Means of static electricity protection. General technical requirements
GOST 12.4.310-2016: Occupational safety standards system. Special clothing to protect from oil and oil products. Technical requirements
GOST 13196-93: Means of level measuring and sampling of oil and oil products
GOST 14921-78: Liquefied hydrocarbon gases. Methods of sampling
GOST 1756-2000: Petroleum products. Determination of saturated vapours pressure
The Document is Referenced By:
GOST 10003-90: Styrene Technical Specification
GOST 1012-2013: Aviation petrols. Specifications
GOST 10136-2019: Diethylene glycol. Technical conditions
GOST 10227-2013: Jet fuels. Specifications
GOST 1036-2014: Plastic lubricants. Method for determining of mechanical impurities.
GOST 1057-2014: Solvent-extracted oils. Method for the determination of phenol and creso
GOST 10585-2013: Petroleum fuel. Mazut. Specifications
GOST 10589-2016: Moulding polyamide 610. Specifications
GOST 11244-2018: Petroleum. Method for determination of potential content of distillation and residue oils
GOST 11851-2018: Petroleum. Methods of paraffin determination
GOST 12261-87: Afk additive
GOST 12308-2013: Thermostable fuels T-6 and T-8B for jet engines. Specifications
GOST 1520-2014: Selectively refined oils. Method for determination of furfural
GOST 18136-2017: Masla. Metod opredeleniya stabil'nosti protiv okisleniya
GOST 18136-72: Oils. Method for determination of oxidation stability in a universal apparatus
GOST 18694-2017: Phenol-formaldehyde resins are solid. Technical conditions
GOST 19710-2019: Ethylene glycol. Technical conditions
GOST 21046-2015: Used petroleum products. General specification
GOST 21150-2017: Litol-24 grease. Technical conditions
GOST 2177-99: Petroleum products. Methods for determination of distillation characteristics
GOST 24676-2017: Pentanes. Method for determination of hydrocarbon composition
GOST 2477-2014: Petroleum and petroleum products. Method for determination of water content
GOST 26378.0-2015: Used petroleum products. General requirements for the method of the tests
GOST 26378.1-2015: Used petroleum products. Method for determination of water
GOST 26378.2-2015: Used petroleum products. Method for determination of mechanical impurities and contaminants
GOST 26378.3-2015: Used petroleum products. Method for determination of relative viscosity
GOST 26378.4-2015: Used petroleum products. Method for determination of flash point in open cup
GOST 26624-2016: 2-Ethylhexanol technical. Specifications
GOST 29040-2018: Gasolines. Method for determination of benzene and total aromatics
GOST 305-2013: Diesel fuel. Specifications
GOST 32339-2013: Petroleum products. Determination of knock characteristics of motor fuels. Research method
GOST 32462-2013: Liquid oil products Potentiometric method of the determination of mercaptan sulfur
GOST 32463-2013: Petroleum products. Determination of pour point of automatic tilt method
GOST 32507-2013: Motor gasolines and liquid hydrocarbon mixtures. Determination of individual and group hydrocarbon composition by capillary gas chromatography
GOST 32510-2013: Marine fuels. Specifications
GOST 32511-2013: Diesel fuel EURO. Specifications
GOST 32513-2013: Automotive fuels. Unleaded petrol. Specifications
GOST 32515-2013: Motor gasolines. Determination of N-methylaniline by method of capillary gas chromatography
GOST 32595-2013: Aviation turbine fuel Jet A-1. Specifications
GOST 32918-2014: Petroleum. Method for determination of hydrogen sulphide, methyl- and ethylmercaptans
GOST 33093-2014: Base oils. Gas chromatographic method for determination of N-methylpyrrolidone
GOST 33098-2014: Oil products. Method for determination of fractional composition at atmospheric pressure
GOST 33133-2014: Automobile roads of general use. Viscous road petroleum bitumens. Technical requirements
GOST 33135-2014: Automobile roads of general use. Viscous petroleum road bitumens. Method for determination of solubility
GOST 33136-2014: Automobile roads of general use. Viscous petroleum road bitumens. Method for determination of depth of penetrometer needle penetratio
GOST 33137-2014: Public roads. Bitumen of petroleum viscous for road building. Method for determining the dynamic viscosity by rotational viscometer
GOST 33138-2014: Public roads. Bitumen of petroleum viscous for road building. The method of determining the extensibility
GOST 33139-2014: Automobile roads of general use. Viscous petroleum road bitumen. Method for determination of the content of solid paraffin
GOST 33140-2014: Automobile roads of general use. Viscous petroleum road bitumen. Method for determining aging under the influence of high temperature and air (RTFOT method)
GOST 33141-2014: Automobile roads of general use. Viscous petroleum road bitumens. Determination of flash points. Cleveland open cup method
GOST 33142-2014: Public roads. Bitumen of petroleum viscous for road building. Method for determination of the softening point. The method "ring and ball"
GOST 33143-2014: Public roads. Bitumen of petroleum viscous for road building. The method of determining the fracture temperature by Fraas method
GOST 33193-2014: Aviation turbine fuels and kerosine. Determination of smoke point
GOST 33194-2014: Oil and oil products. Determination of sulfur content by X-ray fluorescence spectrometry with wave dispersion
GOST 33196-2014: Distillate fuels. Determination of free water and particulate contamination by visual inspection method
GOST 33-2016: Petroleum and petroleum products. Transparent and opaque liquids. Determination of kinematic and dynamic viscosity
GOST 33288-2015: Residual fuel oils. Test for straight-run. Method for determination of xylene equivalent
GOST 33296-2015: Residual fuel oils. Test for straight-run. Method for determination of toluene equivalent
GOST 33297-2015: Residual fuel oils. Test for straight-run. Method for determination of peptization number
GOST 33298-2015: Residual fuel oils. Test for straight-run. Method for evaluation of flocculation
GOST 33304-2015: Residual fuel oils. Test for straight-run. Method for determination of bromine number of fraction with boiling point up to 360 °C
GOST 33341-2015: All-season antifreeze compositions and liquid coolants for heat-exchange systems. Specifications
GOST 33342-2015: Crude oil. Methods for determination of organic chloride
GOST 33359-2015: Residual fuel oils. Test for straight-run. Determination of distillation curve at pressure of 0,133 kPa (1 mm Hg)
GOST 33360-2015: Residual fuel oils. Test for straight-run. Method for determination of total sediment
GOST 3338-2015: Aviation gasolines. Method for determination of performance number by rich mixture
GOST 33666-2015: Road vehicles for transportation and fuelling of petroleum products. Technical requirements
GOST 33690-2015: Petroleum and petroleum products. Determination of hydrogen sulphide, methyl- and ethylmercaptans by gas chromatography method
GOST 33700-2015: Crude oil. Determination of water content by distillation
GOST 33768-2015: Method for determination of kinematic viscosity and calculation of the dynamic viscosity of transparent and opaque liquids
GOST 34396-2018: Oil and oil products custody transfer metering systems. General specifications
GOST 34425-2018: Cooling liquids. Method for determination of methyl alcohol content
GOST 4333-2014: Oil products. Methods for determining the flash point and ignition in an open crucible
GOST 5066-2018: Motor fuels. Methods for determination of cloud, chilling and freezing points
GOST 511-2015: Motor fuels. Motor method for determination of octane number
GOST 5726-2013: Motor оils. Method for determination of detergent properties
GOST 610-2017: Axle oils. Technical conditions
GOST 6370-2018: Petroleum, petroleum products and additives. Method for determination of mechanical admixtures
GOST 6794-2017: Oil AMG-10. Technical conditions
GOST 8.587-2019: State system for ensuring the uniformity of measurements. The mass of oil and petroleum products. Measurement procedures (methods)
GOST 8.601-2010: State system for ensuring the uniformity of measurements. Saturated vapours pressure of petroleum and petroleum products. Measurement procedure
GOST 8226-2015: Fuel for engines. Research method for determination of octane number
GOST 9980.2-2014: Paints and varnishes and raw materials for them. Sampling, monitoring and preparation of samples for testing
GOST EN 1601-2017: Liquid petroleum products. Unleaded gasoline. Determination of organic oxygen-containing compounds and the total content of organically bound oxygen by gas chromatography using a flame ionization oxygen detector (O-FID)
GOST ISO 16591-2015: Petroleum products. Determination of sulfur content. The method of oxidative microcoulometry
GOST ISO 20846-2016: Liquid petroleum products. Determination of sulfur content in automotive fuels. Ultraviolet fluorescence method
GOST ISO 20847-2014: Petroleum products. Determination of sulfur content of automotive fuels. Energy-dispersive X-ray fluorescence spectrometry
GOST ISO 20884-2016: Liquid petroleum products. Determination of sulfur content in automotive fuels. Method of X-ray fluorescence spectrometry with wavelength dispersion
GOST ISO 2719-2013: Petroleum products. Methods for determination of flash point in Pensky-Martens closed cup
GOST ISO 2719-2017: Oil products and other liquils. Determination of flash point. Pensky-Martens closed cup methods
GOST ISO 3405-2013: Petroleum products. Determination of distillation characteristics at atmospheric pressure
GOST ISO 3679-2017: Petroleum products and other liquids. Accelerated method for determining the flash point in a closed crucible under equilibrium conditions
GOST ISO 3733-2013: Petroleum products and bituminous materials. Determination of water by distillation
GOST ISO 8754-2013: Oil products. Determination of sulphur using power dispersion roentgen fluorescent spectrometry.
GOST R 18.12.01-2015: Technology of the aviation fuelling. Functional and technological parameters of airfield fuelling tankers (tankers). Customer requirements
GOST R 18.12.02-2017: Technology of the aviation fueling. Installation of the aviation fuel supply typical schemes.General technical requirements
GOST R 18.3.01-2016: Technology of the aviation fueling. Typical schemes
GOST R 51925-2011: Gasolines. Determination of manganese by method of atomic absorption spectroscopy
GOST R 51999-2002: Technical rectified and denatured synthetic ethyl alcohol. Specifications
GOST R 52574-2006: Technical and denatured synthetic ethyl alcohol. Specifications
GOST R 52660-2006: Automotive fuels. Method for determination of sulphur content by wavelength-dispersive X-ray fluorescence spectrometry
GOST R 52709-2019: Diesel fuels. Determination of cetane number
GOST R 52714-2018: Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method
GOST R 52946-2019: Petroleum products. Determination of detonation characteristics of motor and aviation fuels. Motor method
GOST R 52947-2019: Petroleum products. Determination of detonation characteristics of motor fuels. Research method
GOST R 55067-2012: Magnesium chloride. Specifications
GOST R 55493-2013: Aviation gasoline Avgas 100LL. Specifications
GOST R 55775-2013: Aviation oil МС-8П. Specifications
GOST R 55784-2013: Cutters cumulative. Technical conditions
GOST R 55878-2013: Rectified hydrolytic technical ethyl alcohol. Specifications
GOST R 55997-2014: Stable gas condensate, wide fraction of light hydrocarbons, liquefied petroleum gases. Determination of methanol by gas chromatography
GOST R 56147-2014: Jet fuels. Procedure for qualification tests and drawing up of a technical statement
GOST R 56401-2015: Aircraft. Standard practice for approval of new aviation fuels and lubricants in aircraft
GOST R 56718-2015: Distillates and stable gas condensate. Determination of sulphur compounds by gas chromatography method
GOST R 56720-2015: Petroleum products and stable gas condensate. Determination of boiling range distribution by gas chromatography method
GOST R 57243-2016: Furfuryl alcohol. Specifications
GOST R 57250-2016: Tetrahydrofurfuril alcohol. Specifications
GOST R 57703-2017: Resources saving. Waste treatment. Elimination of used petroleum products
GOST R 58282-2018: Methyl tert-butyl ether. Technical conditions
GOST R 58329-2018: Rules for the operation of main condensate pipelines and product pipelines
GOST R 58367-2019: Arrangement of oil fields on land. Technological design
GOST R 58400.1-2019: General automobile roads. Bituminous petroleum binders. Specifications taking into account the temperature range of operation
GOST R 58400.2-2019: General automobile roads. Bituminous petroleum binders. Technical conditions taking into account the levels of operational transport loads
GOST R 58400.8-2019: General automobile roads. Bituminous petroleum binders. Method for determination of bitumen hardness and creep at negative temperatures using a beam bending rheometer (BBR)
GOST R 58404-2019: Filling stations and complexes. Technical Operation Rules
GOST R 58415-2019: Petrochemical benzene. Technical specifications
GOST R 58623-2019: The main pipeline transport of oil and oil products. Vertical cylindrical steel tanks. Technical Operation Rules
GOST R 8.1004-2021: State system for ensuring the uniformity of measurements (GSI). Systems for measuring the quantity and parameters of oil and oil-gas-water mixtures and measuring installations. Metrological and technical requirements
GOST R 8.782-2012: State system for ensuring the uniformity of measurements. Motor fuel. Direct identification of light oil products
GOST R 8.788-2012: State system for ensuring the uniformity of measurements. Mass of mazut. Measurement procedure in vertical storage tanks. General metrological requirements
GOST R 8.903-2015: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. Procedures of measurements
GOST R 8.908-2015: State system for ensuring the uniformity of measurements. Measuring instruments of volume flow of oil and oil products. Tests, verification and calibration with provers
MI 2092-90: Recommendation. State system for ensuring uniformity of measurements. Mass of fuel oil in railroad tank cars. The method of measurement by the volume-mass method
MI 2950-2005: Recommendation. State system for ensuring uniformity of measurements. A lot of oil. Methods for performing measurements in horizontal tanks in the system of the main pipeline transport
MI 3275-2010: State system for ensuring uniformity of measurements. Metrological support for oil products account during transportation via main pipelines system. Main provisions
MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support
MI 3532-2015: State system for ensuring the uniformity of measurements. Recommendations on definition of weight of oil at registration operations with application quantity measures and indicators of oil quality
Minutes 50: Regulations for carriage of liquid cargo in bulk in tank wagons and hopper-type wagons for transportation of oilbitumen
MP 208-002-2020: State system for ensuring the uniformity of measurements. The system for measuring the amount of oil products at ANP-1 LPPS
ODM 218.3.063-2016: Recommendations on the selection of bitumen binders based on the determination of their rheological properties to increase the resistance to the formation of asphalt concrete
ODM 218.3.073-2016: Recommendations for the use of impregnating compositions to improve the durability of asphalt concrete pavements
PND F T 14.1:2:3:4.10-04: Toxicological control methods. Measurement method of the optical density of the culture of chlorella alga (Chlorella Vulgaris Beijer) to determine the toxicity of drinking, fresh natural and wastewater, water extracts from soils, soils, sewage sludge, pro
PND F T 14.1:2:3:4.12-06: Toxicological control methods. The method of measuring the amount of Daphnia Magna Straus to determine the toxicity of drinking, fresh natural and wastewater, water extracts from soils, soil, sewage sludge, production waste and consumption by direct calcu
PNST 156-2016: Petroleum production. Control for quality while maintaining in accepting for storage
PNST 79-2016: Automobile roads of general use. Viscous petroleum road bitumens. The method determining of the flexural creep stiffness using the bending beam rheometer (BBR)
PNST 82-2016: Automobile roads of general use. Binding petroleum bituminous material. Technical requirements based on traffic loads
PNST 85-2016: Automobile roads of general use. Binding materials petroleum bituminous. Technical requirements based on temperature range of exploitation
SP 37.13330.2012: Industrial transport
ST RK 2467-2014: Oil for hydrostatic transmissions MGE-46V. Specifications.
TU 38.10195-86: Oil standard for rubber testing (SZHR)
Customers Who Viewed This Item Also Viewed:
 |
Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English |
Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
Language: English |
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
Language: English |
Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
Language: English |
Seismic building design code
Language: English |
Conformity assessment. The procedure for conducting inspection control in certification procedures
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.