imgalt

GOST 26996-86

ГОСТ 26996-86

Polypropylene and copolymers of propylene. Specifications

Полипропилен и сополимеры пропилена. Технические условия

Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)

This standard applies to polypropylene obtained by polymerization of propylene, and copolymers obtained by the copolymerization of propylene and ethylene in the presence of organometallic catalysts at low and medium pressures. The standard does not apply to polypropylene for capacitor film.

Настоящий стандарт распространяется на полипропилен, получаемый полимеризацией пропилена, и сополимеры, получаемые сополимеризацией пропилена и этилена в присутствии металлоорганических катализаторов при низком и среднем давлениях. Стандарт не распространяется на полипропилен для конденсаторной пленки

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 9/23/1986

SKU: RUSS71385

Price: $606.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 83 Rubber, technical rubber, asbestos and plastic industries »

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.2 Polymer and composite materials »

ISO classifier » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.080 Plastics » 83.080.20 Thermoplastic materials »

National standards » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.080 Plastics » 83.080.20 Thermoplastic materials »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L2 Organic Chemical Products » L27 Artificial resins and fiber, plastics and plasticizers »

National Standards for OKSTU » POLYMERS, PLASTIC MASSES, CHEMICAL FIBERS AND RUBBERS » Polymers of ethylene and its alkyl derivatives (polyolefins) »


The Document References:

GOST 11035.1-93: Plastics. Determinations of apparent density of moulding materials that can be poured from a specified funnel

GOST 11035.2-93: Plastics. Determination of apparent density of moulding material that cannot be poured from a specified funnel

GOST 11262-80: Plastics. Tensile strength test method.

GOST 11645-73: Plastics method of determination of melt flow index for thermoplastics

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.010-76: Explosion safety. General requirements

GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.

GOST 12.1.041-83: Fire and explosion safety of combustible dusts

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements

GOST 12.2.061-81: Occupational safety standards system. Industrial equipment. General safety requirements to working places

GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors

GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing

GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification

GOST 12019-66: Plastics. Preparation of test specimens from thermoplasts. General requirements

GOST 12026-76: Filter paper for laboratory application

GOST 12423-66: Plastics. Standard atmospheres for conditioning and testing specimens

GOST 1277-75: Reagents. Silver nitrate. Specifications

GOST 14192-96: Cargo marking

GOST 15973-82: Plastics. Methods for determination of ash

GOST 166-89: Vernier callipers. Specifications

GOST 17498-72: Chalk. Kinds, marks and general technical requirements

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 17711-93: Cast copper-zink alloys (brass). Grades

GOST 17811-78: Polyethylene bags for chemical products. Specifications

GOST 18270-72: Super pure acetic acid. Specifications

GOST 18300-87: Technical rectified ethyl alcohol. Specifications

GOST 19109-84: Plastics. Method for the determination of Izod impact strength.

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 2226-88: Paper bags

GOST 22372-77: Dielectric materials. Methods of determination of permittivity and power factor with in a frequency range of 100 to 5·10 in 6 degree Hz

GOST 22648-77: Plastics. Methods for determination of hygienic characteristics

GOST 24104-2001: Laboratory scales. General technical requirements

GOST 24104-88: General purpose and reference laboratory balances

GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 25706-83: Magnifiers

GOST 25828-83: Standard n-heptane. Specifications

GOST 2603-79: Reagents. Acetone. Specifications

GOST 26380-84: Special groupage containers. Types, basic parameters and dimensions

GOST 27748-88: Polyolefin. Test procedure for the determination of contaminants

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 2912-79: Chrome oxide technical. Technical conditions

GOST 4144-79: Reagents. Potassium nitrite. Specifications

GOST 4333-87: Petroleum products. Methods for determination of flash and ignition points in open crucible

GOST 4647-80: Plastics. Method for determination of Charpy's impact strength

GOST 618-73: Aluminum foil for technical purposes. Specifications

GOST 6220-76: Organic dye-stuffs. Pigment blue phthalocyanine. Specifications

GOST 6433.1-71: Solid electrical insulating materials. Environmental conditions at preparation of samples and testing

GOST 6433.2-71: Solid electrical insulating materials. Methods for evaluation of electrical resistance at d. c. voltages

GOST 6433.3-71: Solid electrical insulating materials. Methods for evaluation of electrical strength at a. c. voltage at power (50 Hz) frequency and d. c. voltage

GOST 6507-90: Micrometers. Specifications

GOST 7436-74: Organic dye-stuffs. Lacquer ruby CK. Specifications

GOST 7885-86: Industrial carbon for production of rubber

GOST 8573-77: Organic dye-stuffs. Lacquer red ЖБ. Specifications

GOST 9078-84: Flat pallets

GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications

GOST 9557-87: Flat wooden pallets with dimensions 800ґ1200 mm

GOST 9696-82: Multi-revolution dial indicators graduated in 0,001 and 0,002 mm. Types. Basic parameters. Specifications

GOST 9808-84: Pigmentary titanium dioxide

GOST 982-80: Transformer oils

GOST 9949-76: Coal xylene. Specifications

The Document is Referenced By:

GOST 10944-2019: Manual and locking taps for water heating systems of buildings. General specifications

GOST 10944-97: Manual control and stop valves for building water heating systems. General specifications

GOST 11614-2019: Semi-automatic flush taps. Technical specifications

GOST 11614-94: Semi-automatic flushing valves. Specifications

GOST 15062-2017: Seats for unitation. Specifications

GOST 15062-83: W.c. bowl seats. Specifications

GOST 1811-2019: Ladders for building sewage systems. Technical specifications

GOST 1811-97: Traps for sewer systems in buildings. Specifications

GOST 18908.1-2019: Cut flowers. Roses. Technical specifications

GOST 18908.2-2019: Cut flowers. Chrysanthemums Technical specifications

GOST 18908.8-2019: Cut flowers. Gerbera. Technical specifications

GOST 19681-2016: Sanitary and technical water fittings. General specifications

GOST 19681-94: Sanitary technical water mixing and distributing accessories. General specifications

GOST 20054-2016: Concrete non-pressure pipes. Specifications

GOST 22000-2023: Concrete and reinforced concrete pipes. Types and main parameters

GOST 23289-2016: Waste water drain sanitary accessories. Specification

GOST 23289-94: Waste water drain sanitary accessories. Specifications

GOST 24308-2018: Utensils of copper-nickel alloy, german silver and brass with chrome or nickel coating. General specifications

GOST 24308-80: Utensils of copper-nickel alloy, nickel silver and brass with chrome or nickel coating

GOST 24320-2018: Utensils and covers of copper-nickel and copper-nickel-zinc alloys with silver or gold coating. General specifications

GOST 24320-80: Tableware made of cupronickel and nickel silver coated with silver or gold

GOST 25377-2015: Needles for injections for repeated use. Specifications

GOST 28244-89: Reinforced wires and cords. Specifications

GOST 28638-90: Bristle brush articles for household use. General specifications

GOST 30732-2006: Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.

GOST 30815-2002: Automatic valves for regulation of temperature in heating devices of systems of water heating of buildings. General specifications

GOST 30815-2019: Automatic thermostats of heating devices for water heating systems in buildings. General specifications

GOST 32085-2013: Chemical (synthetic) fibres. Safety requirements

GOST 32522-2013: Polypropylene woven sacks. General specifications

GOST 32583-2013: Stainless steel table and kitchen cutlery. General specifications

GOST 32686-2022: Polyethylene terephthalate bottles for edible liquids. General specifications

GOST 32736-2014: Consumers’ package from combined materials. General specifications

GOST 33746-2016: Returnable polymeric boxes. General specifications

GOST 33759-2016: Instrument oil (MVP). General specifications

GOST 33837-2016: Polymeric packaging for food products. General specifications

GOST 33837-2022: Polymeric packaging for food products. General technical conditions

GOST 34264-2017: Polymeric transport containers. General specifications

GOST 34405-2018: Metal prefabricated cans. General specifications

GOST 34534-2019: Packaging. Polymer bottles for food liquids. General specifications

GOST 34577-2019: Pallets for cargo. Laying sheets for pallets. General specifications

GOST 6388-91: Tooth brushes

GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.

GOST 8020-2016: Concrete and reinforced concrete structures for man-holes of sewerage, water supply and gas supply pipeline systems. Specification

GOST 8699-2013: Cigars and cigarillos. General specifications

GOST 9.602-2016: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST R 51268-99: Scissors. General specifications

GOST R 51289-99: Returnable polymeric boxes. General specifications

GOST R 51314-99: Aluminium caps and caps made of aluminium-plastics combinations for medicine remedies. General specifications

GOST R 51626-2000: Chemical (synthetic) fibres. Safety requirements

GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications

GOST R 51760-2001: Polymeric consumers packagings. General specifications

GOST R 51977-2002: Plastic accumulator cases. Specifications

GOST R 52564-2006: Polypropylene woven sacks. General specifications

GOST R 52579-2006: Consumers package from combined materials. General specifications

GOST R 52620-2006: Transport polymeric containers. General specifications

GOST R 52909-2008: Targets for stand shooting and sporting. General specifications

GOST R 53494-2009: Premix vitamin and vitamin-mineral for wheat flour. Specifications

GOST R 54249-2010: Peat humate liquid fertilizers. Specifications

GOST R 54857-2011: Buildings and structures. Determination of air change of rooms method of indicator gas

GOST R 54927-2012: Polymer composite sheet for special purpose. General technical requirements

GOST R 55290-2012: Buckwheat groats. General specifications

GOST R 55732-2013: Mining equipment. Support of mine working. Polymer net for the guard mine working. Specifications

GOST R 55970-2014: Iodized food additives. General specifications

GOST R 56459-2015: Fire extinguishing devices with thermosetting micro capsulation outgassing extinguishing composition. General technical requirements. Test methods

GOST R 57432-2017: Packaging. Films of the biodegradable material. General specifications

GOST R 57458-2017: Heated tobacco. General specifications

GOST R 58109-2018: The liquids for electronic nicotine delivery systems. General specifications

GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions

GOST R 70489-2022: Children's orthopedic spacers. General technical requirements

GOST R 70654-2023: Bestabach mixture for heating. General technical conditions

GOST R 70707-2023: Compact units for treatment of domestic wastewater. General technical conditions

KMS 1216:2011: Soybean product "Asparagus" (Fuju). Specifications

KMS 1219:2011: Dungan starch noodles "Fyn-Tez". Technical specifications

MR 3.1/3.5.0170/5-20: Recommendations on the use and handling of protective clothing and personal protective equipment when working in contact with patients with COVID-19 (suspicious of a disease) or when working with biological material from such patients

MU 4149-86: Methodological instructions for state sanitary supervision over production and application of polyolefin polymer materials intended for contact with food products

OST 26-07-1374-76: Types and grades of plastics used in armature engineering.

PNST 32-2015: Polymer film with nanocoating. General specifications

RST RSFSR 605-89: Folding knives. General technical conditions

SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work

ST RK 2526-2014: Heater wires. Technical conditions

ST RK GOST R 52579-2008: Consumers package from combined materials. General specification

ST TsKBA 056-2008: Pipe fittings. Types and brands of plastics used in the valve industry

STB 1517-2004: Plastic consumer packaging. General specifications

STB 1734-2007: Chemical fibers and fabrics (synthetic). Safety requirements

TR 168-05: Technical recommendations for the design, installation and operation of drainage from polyethylene pipes with filter sheath

TU 1390-007-32256008-05: External heat-insulating coating of pipes and fittings with a diameter of 57 ... 720 mm

TU 576431-009-01297858-99: Pipeline elements with polyurethane foam insulation. Technical conditions

TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines

TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!