GOST 6611.2-73
ГОСТ 6611.2-73
|
|
Textile threads. Methods for determination of breaking load and elongation at rupture
Нити текстильные. Методы определения разрывной нагрузки и удлинения при разрыве
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 527 dated 04.06.92
The standard applies to yarn (single and twisted) from natural, chemical fibers and mixed yarn (monofilament, complex, twisted complex, twisted combined, textured) natural, chemical and heterogeneous and establishes the rules for acceptance of a batch of textile yarns. The standard does not apply to glass and metal yarns and asbestos yarn.
Стандарт распространяется на пряжу (одиночную и крученую) из натуральных, химических волокон и смешанной нити (мононити, комплексные, крученые комплексные, крученные комбинированные) натуральные, химические и неоднородные и устанавливает методы определения разрывной нагрузки, удлинения при разрыве нитей и подсчетудельной разрывной нагрузки нитей. Стандарт не распространяется на стеклянные, металлические текстурированные нити, асбестовую пряжу, а также химические нити, удлиняющиеся более чем на 1 % при повышении предварительного удельного натяжения с 20 мН/текс до 30 мН/текс (например, эластомерные).
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
8/20/1973
SKU: RUSS71403
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.5 Testing and control of light industry products »
4.5.1 Textile Industry Products »
ISO classifier »
59 TEXTILE AND LEATHER PRODUCTION »
59.080 Textile products »
59.080.20 Yarn »
National standards »
59 TEXTILE AND LEATHER PRODUCTION »
59.080 Textile products »
59.080.20 Yarn »
National Standards for KGS (State Standards Classification) »
Latest edition »
M Textile and leather materials and products »
M0 General rules and regulations on light industry »
M09 Test methods. Packaging. Marking »
National Standards for OKSTU »
POLYMERS, PLASTIC MASSES, CHEMICAL FIBERS AND RUBBERS »
Artificial fibers and threads »
National Standards for OKSTU »
POLYMERS, PLASTIC MASSES, CHEMICAL FIBERS AND RUBBERS »
Fibers and threads, synthetic »
National Standards for OKSTU »
PRODUCTS OF THE TEXTILE INDUSTRY (WITHOUT YARNS, FABRICS, NON-WOVEN MATERIALS AND KNITS) »
Threads and thread products »
National Standards for OKSTU »
PRODUCTS OF THE TEXTILE INDUSTRY - YARN »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 6611.2-69: Textile threads. Method for determination of the thickness
GOST 6611.3-69: Textile threads. Methods for determination of breaking load and elongation at rupture
The Document References:
GOST 10681-75: Textiles. Methods for determination atmospheric conditions for sample conditioning and testing
GOST 26171-84: Chemical fibres and threads. Norms of preloads in testing
GOST 6611.0-73: Textile threads. Rules of acceptance
GOST 6611.1-73: Textile threads. Method for determination of linear density
The Document is Referenced By:
GOST 10063-93: Polyamid yarn for textile industry. Specifications
GOST 10078-85: Yarn from bast fibres and their blend with chemical fibres. Specifications
GOST 10290-72: Worsted woollen and half-woollen (mixed) yarn for weaving manufacture. Specifications
GOST 1086-74: Silk insulating threads. Specifications
GOST 14051-78: Industrial all-wool and half-wool felts for musical key instruments. Technical specification
GOST 14308-77: Viscose yarn spun dild produced by centrifugal method. Specifications
GOST 14362-69: Carded cotton grey single roving yarn. Specifications
GOST 14862-76: Viscose yarn on sectional spools. Specifications
GOST 14961-91: Linen threads and linen threads with chemical filaments. Specifications
GOST 15897-79: Polyamide thread for industrial use. Specifications
GOST 15897-97: Capron thread for industrial fabrics. Specifications
GOST 16537-83: Condensed cotton yarn. Specifications
GOST 1674-77: Silk twisted threads. Specifications
GOST 18621-73: Qarded all woollen and half woollen yarn for knitting manufacture. Specifications
GOST 19603-74: Man-made filament yarns and twisted filament yarns for technical purposes. Method for determination of linear shrinkage
GOST 22501-85: Triacetate thread in bobbins. Specifications
GOST 22665-83: Natural silk sewing threads. Specifications
GOST 22693-77: Polyamide. Yarn for technical rubber articles. Specification
GOST 22693-98: Polyamide thread for technical rubber articles. Specifications
GOST 23364-2001: Synthetic textured threads. Method for determination of breaking strength and breaking elongation
GOST 23364-78: Synthetic textured threads and tow. Methods for the determination of the breaking strength and breaking elongation
GOST 24662-81: Industrial polyester yarn. Specifications
GOST 24662-94: Industrial polyester yarn. Specifications
GOST 26300-84: Acetate rayon in bobbins. Specifications
GOST 28753.1-90: Domestic-sewing threads. Method for determination of snarling tendency
GOST 28753.2-90: Textile threads. Method for determination of snarling tendency
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 28890-90: Textile threads. Methods for determining the components of the full elongation under tension of the threads by loading, less discontinuous
GOST 30200-94: Textile materials for filtration of industrial aerosols. Method for determination of wear resistance
GOST 30226-93: Cotton and synthetic threads for shoes. Specifications
GOST 31620-2012: Surgical sutures. General technical requirements. Test method
GOST 32086-2013: Blended yarn from cotton, flax and chemical fibres. Specifications
GOST 33396-2015: Geosynthetic materials. Method for determination of resistance to hydrolysis in water
GOST 33986-2016: Automotive vehicles. High-pressure cylinders for compressed natural gas used as motor fuel. Technical requirements and test methods
GOST 396-84: Silk twisted non-sterile threads for surgery. Specifications
GOST 4.128-84: Product-quality index system. Chemical threads. Quality characteristics nomenclature
GOST 4.419-86: Product-quality index system. Pure linen, linen and linen with chemical filaments yarn. Index nomenclature
GOST 5618-80: Raw silk. Specifications
GOST 6309-93: Cotton and synthetic threads for sewing. Specifications
GOST 6611.1-73: Textile threads. Method for determination of linear density
GOST 8402-89: Cotton threads for embroidering knitting and darning. General specifications
GOST 8871-84: Rayon undyed yarn in bobbins produced by centrifugal method. Specifications
GOST 9706-75: Rayon dope-dyed yarn produced by bobbin method. Specifications
GOST R 51703-2001: Blended yarn of the mixture of cotton, flax and chemical fibres. Specifications
GOST R 51753-2001: High pressure cylinders for the compressed natural gas as a fuel for automotive vehicles. General specifications
GOST R 53005-2008: Surgical suture materials. General technical requirements. Test methods
GOST R 53019-2008: Sewing threads for technical and special manufactured goods. Specifications
GOST R 54588-2011: Bast fibres technical yarn for cable and packing. Specifications
GOST R 55307-2012: Materials textile. Method of stand model tests stability to action of light and weather
GOST R 55559-2013: Composite cylinders for liquefied petroleum gases at pressure up to 2,0 MPa. General technical requirements. Test methods
GOST R 56283-2014: Threads textile. Method for determination of the breaking load in loop
GOST R 58063-2018: Trunk pipeline transport of oil and oil products. Geomoduls. General specifications
GOST R 58257-2018: Trunk pipeline transport of oil and oil products. Fabric ballasting devices. General specifications
OST 17-330-2002: Polyamide ( nylon ) threads. Special Specifications.
RD 31.03.03-90: Use of synthetic ropes on ships of the Ministry of the Navy
RST RSFSR 670-82: The yarn is down. Technical conditions
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.