GOST R 54475-2011
ГОСТ Р 54475-2011
|
|
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Трубы полимерные со структурированной стенкой и фасонные части к ним для систем наружной канализации. Технические условия
Status: Effective - Introduced for the first time. IUS 3-2012
This standard applies to pipes with a structured wall and fittings to them of polymeric materials for free-flow underground underground sewer systems: domestic sewage, drainage and drainage, storm sewer, discharge of industrial effluent, to which the pipeline material is chemically resistant. This standard establishes requirements for pipes and fittings (fittings) made of polyethylene PE (PE), polypropylene PP (PP) and non-plasticized polyvinyl chloride PVC-U (NPVH)
Настоящий стандарт распространяется на трубы со структурированной стенкой и фасонные части к ним из полимерных материалов для систем безнапорной подземной наружной канализации: хозяйственно-бытовой канализации, дренажа и водоотведения, ливневой канализации, отведения промышленных стоков, к которым материал трубопровода является химически стойким. Настоящий стандарт устанавливает требования к трубам и фасонным частям (фитингам) из по-лиэтилена РЕ (ПЭ), полипропилена РР (ПП) и непластифицированного поливинилхлорида РVС-U (НПВХ)
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/20/2011
SKU: RUSS71449
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
k.41 Heat supply, heating, ventilation and air conditioning »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.2 Plastic Products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.45 Plastic fittings »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.45 Plastic fittings »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.030 External sewer systems »
National standards »
93 CIVIL CONSTRUCTION »
93.030 External sewer systems »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh2 Sanitary, engineering and fire fighting equipment for buildings »
Zh21 Water supply and sewerage »
The Document References:
Federal Law 184-FZ: About technical regulation
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 10-88: Inside micrometers. Specifications
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 11645-73: Plastics method of determination of melt flow index for thermoplastics
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing
GOST 14192-96: Cargo marking
GOST 15139-69: Plastics. Methods for the determination of density (mass density)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 166-89: Vernier callipers. Specifications
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 24157-80: Plastic pipes. Method of determination of the resistance to constant internal pressure
GOST 27078-86: Thermoplastic pipes. Methods of determination of the tubes length after heating
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 9142-90: Boxes of corrugated board. General specifications
GOST ISO 11922-1-2006: Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Part 1. Metric series
GOST ISO 4065-2005: Thermoplastics pipes. Universal wall thickness table
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50825-95: Unplasticized polyvinyl chloride pipes and fittings. Determination of the Vicat softening temperature
GOST R 51720-2001: Polymeric sacks. General specifications
GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions
GOST R ISO 580-2008: Plastics piping systems. Injection-moulded thermoplastics fittings. Methods for determination of fittings appearance alteration after heating
SNiP 2.04.03-85: Sewage. External systems and structures
SP 40-102-2000: Design and installation of pipeline systems of water supply and sewerage made of polymeric materials. General requirements. To replace SN 478-80
The Document is Referenced By:
GOST R 58121.2-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 2. Pipes
GOST R 59910-2021: Polymeric pipes reinforced with a metal framework, and connecting parts to them. General technical conditions
GOST R 70628.2-2023: Plastic pipelines for water supply, drainage and pressure sewerage. Polyethylene (PE). Part 2. Pipes
GOST R 70751-2023: Heat-resistant polymeric pipes for laying power cables with a voltage of 1 to 500 kV. General specifications
ODM 218.3.083-2016: Guidelines for trenchless laying of road culvert pipes
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
SP 100.13330.2016: The reclamation systems and construction
SP 399.1325800.2018: External water supply and sewage systems made of polymer materials. Rules for design and installation
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
