GOST 12.2.009-99
ГОСТ 12.2.009-99
|
|
Metal-working machines. General safety requirements
Станки металлообрабатывающие. Общие требования безопасности
Status: Valid - Supersedes
The standard establishes general safety requirements and applies to all types of metalworking machines coming into operation, including those that are part of automatic lines and robotic complexes, as well as devices used with them, designed to be connected to an AC mains voltage of up to 660 V and up to 200 Hz and designed for operation in climatic conditions UHL4 according to GOST 15150. The standard does not apply to machines whose technical specifications for the development are approved before the introduction of GOST 12.2.009.
Стандарт устанавливает общие требования безопасности и распространяется на поступающие в эксплуатацию металлообрабатывающие станки всех видов, в том числе входящие в состав автоматических линий и роботизированных комплексов, а также на применяемые совместно с ними устройства, расчитанные на подключение к питающей сети переменного тока напряжением до 660 В и чатотой до 200 Гц и предназначенные для работы в климатических условиях УХЛ4 по ГОСТ 15150. Стандарт не распространяется на станки, технические задания на разработку которых утверждены до введения в действие ГОСТ 12.2.009.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Russian Federation for Standardization, Metrology and Certification,
2/11/2000
SKU: RUSS71548
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.080 Metal cutting machines »
National standards »
25 MECHANICAL ENGINEERING »
25.080 Metal cutting machines »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.080 Metal cutting machines »
25.080.01 Machine tools in general »
National standards »
25 MECHANICAL ENGINEERING »
25.080 Metal cutting machines »
25.080.01 Machine tools in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G0 General rules and regulations for engineering »
G07 Safety »
As a Replacement Of:
GOST 12.2.009-80: Metalworking machines
The Document References:
GOST 12.0.002-80: Occupational safety standards system. Terms and definitions
GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.10-87: Occupational safety standards system. Installations, generators and induction heaters for electrothermics, ultrasonic installations and generators. Safety requirements
GOST 12.2.007.13-2000: Occupation safety standards system. Electric lamps. Safety requirements
GOST 12.2.007.13-88: Electric light bulbs
GOST 12.2.007.14-75: Cables and cable fittings. Safety requirements
GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements
GOST 12.2.007.2-75: Occupation safety standards system. Power transformers and reactors. Safety requirements
GOST 12.2.007.6-75: Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v
GOST 12.2.009-80: Metalworking machines
GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors
GOST 12.2.064-81: Occupational safety standards system. Controls of industrial equipment. General safety requirements
GOST 12.2.107-85: Occupational safety standards system. Noise. Metal-cutting machine tools. Allowable noise characteristics
GOST 12.3.028-82: Processes of treatment materials by abrasive and borazon tools
GOST 12.4.026-76: Signal colors and safety signs
GOST 12.4.040-78: Industrial equipment controls
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15597-82: Lighting fixtures designed for industrial buildings
GOST 17677-82: Light fixtures
GOST 18322-78: Equipment maintenance and repair system. Terms and definitions
GOST 21021-2000: Numerical control units. General technical requirements
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements
GOST 21753-76: Man -machine system control levers
GOST 22269-76: Man-machine system Operator workplace layout of workplace elements General ergonomic requirements
GOST 22613-77: Man-machine system. Rotary switches and commutators. General ergonomic requirements
GOST 22614-77: «Man-machine» system. Key-actuated and push-button switches and commutators. General ergonomic requirements
GOST 22789-94: Low-voltage unitized devices
GOST 24940-96: Buildings and structures. Methods of measuring luminance
GOST 26583-85: Maintenance system for technological equipment of engineering work. Metal cutting, forge-and-pressing, casting and woodworking operational and
GOST 26642-85: Numerical control units for metalworking machines. External communication with machines
GOST 27487-87: Electrical equipment for industrial. General requirements and test methods
GOST 28139-89: School equipment. General safety requirements
GOST 28288-89: Light fixtures with built-in
GOST 29037-91: Electromagnetic compatibiliтy of technical means. Certification tests. Ceneral rules
GOST 5727-88: Safe glass for ground transport
GOST 6697-83: Power supply systems, sources, converters and receivers of electric alternating current energy rated frequencies from 0,1 to 10000 Hz and tolerances
GOST 7110-82: Hand lamps
GOST 7599-82: Machine-tools, metal-working
GOST 8607-82: Light fixtures for illumination of domestic and public interiors
GOST 8-82: Metal-cutting machine tools
GOST 9146-79: Machines. Controls. Direction of action
GOST 9411-91: Colored optical glass
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 51321.1-2000: Low-voltage switchgear and controlgear assemblies. Part 1. Requirements for type-tested and partially type-tested assemblies. General technical requirements and methods of tests
GOST R IEC 60204-1-99: Safety of machinery. Electrical equipment of machines. Part 1. General requirements
The Document is Referenced By:
GOST 12.2.017.4-2003: Sheet-bending presses. Safety requirements
GOST 12.2.029-88: Machine tool attachments
GOST 12.2.051-80: Occupational safety standards system. Technological ultrasonic equipment. Safety requirements
GOST 12.2.116-2004: Three- and four-roller plate-bending machines. Safety requirements
GOST 12.3.023-80: Diamond tools, treatment processes of materials
GOST 12.3.025-80: Occupational safety standards system. Metal working by cutting. Safety requirements
GOST 12.3.028-82: Processes of treatment materials by abrasive and borazon tools
GOST 1583-93: Aluminium casting alloys. Specifications
GOST 19424-97: Cast zinc alloys in pigs. Specifications
GOST 21021-2000: Numerical control units. General technical requirements
GOST 22133-86: Paint and varnish coatings of metal-cutting, press-forging, foundry and wood-working equipment
GOST 24568-81: Magnetic chucks. Specifications
GOST 26050-89: Industrial robots
GOST 27803-91: Controlled electric drives controlled for metal working equipment and industrial robots. Technical requirements
GOST 28053-89: Chips of non-ferrous metals and alloys. Methods of sampling, sample preparation and test methods
GOST 295-98: Aluminium for deoxidation, manufacture of ferroalloys and aluminothermy. Specifications
GOST 30273-98: Circular and rectangular electromagnetic chucks. General specifications
GOST 30534-97: Means of measurement for linear and angular dimensions. Safety requirements and test methods
GOST 30544-97: Metal-cutting machines. Methods of circular trajectory accuracy and constancy
GOST 30620-98: Aluminium piston alloys. Specifications
GOST 30685-2000: Honing and lapping vertical machines. General specifications
GOST 30803-2002: Transmission tooth gears of the traction main railway stock . Specifications
GOST 32406-2013: Diamond and cubic boron nitride tools. Safety requirements
GOST 3640-94: Zinc. Specifications
GOST 7599-82: Machine-tools, metal-working
GOST R 50786-2012: Metal-cutting household machine-tools. Safety requirements
GOST R 50786-95: Metal-cutting machine tools household. Safety requirements
GOST R 51101-2012: Metalworking and woodworking machines. Testing methods of compliance with safety requirements
GOST R 51101-97: Metalworking and woodworking machines small-size. Testing methods safety requirements
GOST R 51175-98: Transmission tooth gears of the traction main railway stock. Specifications
GOST R 51838-2012: Safety of machinery. Electrical equipment for industrial machines. Test methods
GOST R 52588-2006: Abrasive tools. Safety requirements
GOST R 52588-2011: Abrasive tools. Safety requirements
GOST R 54564-2011: Non-ferrous metals and alloys scarp and waste. General specifications
GOST R 54564-2022: Non-ferrous metals and alloys scrap and waste. General technical conditions
GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification
GOST R 57178-2016: Electric-contact method of surface hardening of details. Typical technological process
GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure
GOST R EN 13898-2009: Machine tools. Safety. Sawing machines for metal cold cutting
GOST R IEC 60519-1-2005: Safety in electric heating equipment. Part 1. General requirements
Indication O-1515u: Recommendations for planning labor protection measures in railway transport
ONTP 06-86: All-Union norms for the technological design of enterprises of mechanical engineering, instrument engineering and metalworking. Workshops for the manufacture of special technological and non-standardized equipment, means of mechanization and automation an
OST 24.149.03-89: Cogwheels for traction rolling stock of mainline railways. Technical conditions.
POT R M-006-97: Intersectoral labor protection rules for cold metal processing
POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products
POT R M-018-2001: Intersectoral labor protection rules when applying metal coatings
POT R M-027-2003: Intersectoral rules on labor protection in road transport
POT R O 29-001-93: Labor protection regulations for printing companies
POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering
POT R O-97300-04-95: Rules for labor protection during storage and processing of fruits and vegetables
POT RO-14000-002-98: Ordinance on Safety Assurance for Process Equipment
POT RZhD 4100612-CTR-062-2015: Temporary rules on labor protection during maintenance and current repair of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive
RD 36-62-00: Hoisting equipment. General technical requirements.
STB 1568-2005: Occupational safety standards system. Printing equipment. Safety requirements and test methods
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
