imgalt

GOST R 55727-2013

ГОСТ Р 55727-2013

Mining equipment. Mine loading cars. General technical requirements and test methods

Оборудование горно-шахтное. Вагонетки грузовые шахтные. Общие технические требования и методы испытаний

Status: Effective - Introduced for the first time. IUS 9-2014

This standard applies to narrow-gauge cargo mine trolleys intended for transporting rock mass through horizontal and inclined underground mine workings and at industrial sites of mines in the following conditions: - coal mines and mines, including hazardous gas and / or dust; - Type 1 atmosphere according to GOST 15150 with air dust content of not more than 200 mg / m3; - relative air humidity at 25 ° С - up to 100%; - ambient temperature - from 35 ° C to minus 40 ° C; - longitudinal slope - from + 30 ° to minus 30 °; - The width of the wheel track - 600, 750 and 900 mm. The standard does not apply to mine freight trolleys with a tilting body, tail-bottom trolleys with wheels fixed on it, bottom-discharge trolleys with split axes of semi-bows and trolleys with a removable body

Настоящий стандарт распространяется на вагонетки грузовые шахтные узкой колеи, предназначенные для транспортирования горной массы по горизонтальным и наклонным подземным горным выработкам и на промышленных площадках шахт в следующих условиях: - угольные шахты и рудники, в том числе опасные по взрыву газа и/или пыли; - атмосфера типа 1 по ГОСТ 15150 при запыленности воздуха не более 200 мг/м3; - относительная влажность воздуха при температуре 25 ° С - до 100 %; - температура окружающей среды - от 35 ° С до минус 40 °С; - продольный уклон пути - от +30° до минус 30°; - ширина колесной колеи - 600, 750 и 900 мм. Стандарт не распространяется на шахтные грузовые вагонетки с опрокидным кузовом, вагонетки с откидным днищем с закрепленными на нем колесами, вагонетки с донной разгрузкой с разрезными осями полускатов и вагонетки со съемным кузовом

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 11/8/2013

SKU: RUSS71630

Price: $349.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.4 Machines and equipment for mining, oil industry and quarrying »

ISO classifier » 73 MINING AND MINERAL PRODUCTS » 73.100 Mining equipment » 73.100.40 Equipment for haulage and lifting »

National standards » 73 MINING AND MINERAL PRODUCTS » 73.100 Mining equipment » 73.100.40 Equipment for haulage and lifting »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G4 Machinery and equipment for heavy industry » G41 Exploration, mining and mineral processing equipment »


The Document References:

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.112-86: Occupational safety standards system. Mine electric locomotive transport. General requirements for rolling stock

GOST 12971-67: Rectangular plates for machines and devices. Dimensions

GOST 13837-79: General purpose dynamometers

GOST 14192-96: Cargo marking

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 166-89: Vernier callipers. Specifications

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 28840-90: Machines for tension, compression and bending tests of materials

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 31439-2011: Equipment and components intended for use in potentially explosive atmospheres in underground mines

GOST 31441.1-2011: Non-electrical equipment for potentially explosive atmospheres. Part 1. General requirements

GOST 380-2005: Common quality carbon steel. Grades

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4366-76: Grease synthetic solidol. Specifications

GOST 7462-73: Enamels НЦ-5123. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 977-88: Steel castings. General specifications

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 53464-2009: Metal and alloy castings. Dimensions and mass tolerances and machining allowances

PB 03-553-03: Uniform Safety Requirements for Underground Development of Ore, Non-Ore, and Placer Mineral Deposits

PB 05-618-03: Coal Mine Safety Regulations

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!