GOST 15763-2005
ГОСТ 15763-2005
|
|
Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications
Соединения трубопроводов резьбовые и фланцевые на PN (Py) до 63 МПа (до около 630 кгс/см кв.). Общие технические условия
Status: Effective
The standard applies to metal threaded and flanged with welded nipple connections of pipelines for general engineering applications for hydraulic and pneumatic systems and details of these pipe connections that operate in non-corrosive environments at ambient and working temperature from minus 50 ° С to plus 120 ° С and nominal ) pressure up to 63 MPa (up to about 630 kgf
Стандарт распространяется на металлические резьбовые и фланцевые с приварным ниппелем соединения трубопроводов общемашиностроительного применения для гидравлических и пневматических систем и детали данных соединений трубопроводов, работающие в условиях неагрессивных сред при температуре окружающей и рабочей среды от минус 50 °С до плюс 120° С и номинальном (условном) давлении до 63 МПа (до около 630 кгс/см2). Стандарт не распространяется на фланцевые соединения по ГОСТ 9399, ГОСТ 12815 - ГОСТ 12822, ГОСТ 22512.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
6/19/2008
SKU: RUSS71641
The Product is Contained in the Following Classifiers:
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.60 Flanges, couplings and connections »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.60 Flanges, couplings and connections »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G18 Fittings and pipeline connections »
As a Replacement Of:
GOST 15763-91: Pipeline thread connections for Py up to 63 MPa (up to 630 kgf/cm2)
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions
GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions
GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 1414-75: Construction steel with enhanced and high machinability
GOST 14192-96: Cargo marking
GOST 15527-2004: Pressure treated copper zinc alloys (brasses). Grades
GOST 15763-91: Pipeline thread connections for Py up to 63 MPa (up to 630 kgf/cm2)
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods
GOST 18160-72: Fasteners. Packing. Marking. Transportation and storage
GOST 18242-72: Statistical acceptance inspection by alternative feature inspection plans
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 18475-82: Cold-worked aluminum and aluminum alloy pipes
GOST 18829-73: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 20403-75: Rubber. Method for determination hardness in international units (30 to 100 IRHD)
GOST 20799-88: Industrial oils Specifications
GOST 21971-76: Threaded piping joints. Conventional passages (nominal sizes). Series
GOST 21972-76: Threaded piping joint. Nominal (conditional) pressures. Series
GOST 21973-76: Threaded piping joints. Joining threads. Series
GOST 21974-76: Threaded piping joints. External tube diameters and inside diameters of hoses. Series
GOST 22512-77: Steel flanges with tongue and groove for Pnom up to 6,4 MPa (64 kgf/sq sm) and Dnom to 300 mm. Connecting dimensions
GOST 22525-77: Threaded pipeline connections. Pipe nipple ends for union nuts. Construction
GOST 22526-77: Threaded pipeline connections. Screwed pipe nipple ends and sockets for them. Construction
GOST 23353-78: Threaded pipeline connections. Cartive nut. Construction
GOST 23354-78: Threaded pipeline connections. Cut ring. Construction
GOST 23355-78: Threaded pipeline connections. Ball nipple. Construction
GOST 23358-87: Threaded pipe-line connections. Joint washers. Design
GOST 23677-79: Hardness meters for metals
GOST 24072-80: Passage tube connections with cut ring. Construction
GOST 24073-80: Reduce tube connections with cut ring. Construction
GOST 24074-80: End tube connections with cut ring. Construction
GOST 24075-80: Elbow passage tube with cut ring. Construction
GOST 24078-80: Elbow passage tube connections with cut ring the end for connection sleeve. Construction
GOST 24079-80: Tee passage tube connections with cut ring. Construction
GOST 24080-80: Tee reduce tube connections with cut ring. Construction
GOST 24086-80: Tee passage tube connections with cut ring the end for connection sleeve. Construction
GOST 24087-80: Cross passage tube connections with cut ring. Construction
GOST 24090-80: Tube connections with cut ring partition unions. Construction
GOST 24091-80: Dead tube connections with cut ring. Construction
GOST 24485-80: Passage tube connections with ball nipple. Construction
GOST 24486-80: Reducing tube connections with ball nipple. Construction
GOST 24487-80: Welding passage tube connections with ball nipple. Construction
GOST 24488-80: End tube connections with ball nipple. Construction
GOST 24489-80: Elbow passage tube connections with ball nipple. Construction
GOST 24492-80: Tee passage connections with ball nipple. Construction
GOST 24493-80: Tee reducing tube connections with ball nipple. Construction
GOST 24499-80: Cross passage tube connections with ball nipple. Construction
GOST 24502-80: Partition tube connections with ball nipple. Construction
GOST 24503-80: Dead tube connections with ball nipple. Construction
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 25065-90: Threaded pipe fittings. Screwed-in ends of case components sealed with rubber. O-rings and their sockets. Design
GOST 25229-82: Basic norms of interchangeability. Metric taper screw thread
GOST 2622-75: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28016-89: Threaded pipeline connections. Welded conical nipple. Construction
GOST 28549.5-90: Lubricants, industrial oils and related products. (Class L). Classification. Family H (hydraulic systems)
GOST 28918-91: Threaded pipe fittings. Thrust and clamping rings. Construction
GOST 28941.10-91: Flare reducing branch tee fittings. Construction
GOST 28941.11-91: Flare cross straight fittings. Construction
GOST 28941.12-91: Flare fittings. Flared couplings. Construction
GOST 28941.13-91: Flare fittings. Reducing couplings. Construction
GOST 28941.14-91: Flare fittings. Straight couplings. Construction
GOST 28941.15-91: Flare fittings. Straight couplings with inside cone. Construction
GOST 28941.16-91: Flare fittings. Stud couplings. Construction
GOST 28941.17-91: Flare fittings. Stud couplings with inside cone. Construction
GOST 28941.18-91: Flare fittings. Bulkhead couplings. Construction
GOST 28941.1-91: Flare straight fittings. Construction
GOST 28941.19-91: Flare fittings. Unequal elbows. Construction
GOST 28941.20-91: Flare fittings. Stud elbows. Construction
GOST 28941.21-91: Flare fittings. Reducing branch tees. Construction
GOST 28941.22-91: Flare fittings. Stud tees. Construction
GOST 28941.23-91: Flare fittings. Straight crosses. Construction
GOST 28941.24-91: Flare fittings. Snuggle covers. Construction
GOST 28941.25-91: Flare fittings. Snuggle plugs. Construction
GOST 28941.26-91: Flare couplings. Union nuts. Construction
GOST 28941.27-91: Flare fittings. Sleeves. Construction
GOST 28941.28-91: Flare fittings. O-rings. Construction
GOST 28941.2-91: Flare fittings with reducing couplings. Construction
GOST 28941.3-91: Flare reducing fittings with inside cone. Construction
GOST 28941.4-91: Flare stud fittings. Construction
GOST 28941.5-91: Flare stud fittings with inside cone. Construction
GOST 28941.6-91: Flare bulkhead fittings. Construction
GOST 28941.7-91: Flare straight elbow fittings. Construction
GOST 28941.8-91: Flare stud elbow fittings. Construction
GOST 28941.9-91: Flare straight reducing branch tee fittings. Construction
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 380-2005: Common quality carbon steel. Grades
GOST 380-94: Normal quality carbon steel
GOST 4543-71: Structural alloyed steel
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 6111-52: Conical pipe thread. Profile, basic dimensions and tolerances
GOST 617-2006: General-purpose copper and brass tubes of round section. Specifications
GOST 617-90: Copper tubes. Specifications
GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread
GOST 6424-73: Jaw (mouth), end of the wrench and width across flats
GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps
GOST 859-2001: Copper. Grades
GOST 8734-75: Seamless steel tubes cold deformed. Range
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests
GOST 9378-93: Roughness comparison specimens
GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.
GOST 9567-75: Precision steel tubes. Range
GOST 9833-73: Rubber toroidal sealing rings for hydraulic and pneumatic equipment. Construction and dimensions
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods
GOST R ISO 2859-1-2007: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection
The Document is Referenced By:
GOST 23353-78: Threaded pipeline connections. Cartive nut. Construction
GOST 34493-2018: Tractors and agricultural machinery powered by gas engine fuel. General technical requirements
GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking
GOST R 54439-2011: Gas fired central heating boilers. Type B boilers of nominal heat input not exceeding 300 kW, but not exceeding 1000 kW
GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking
GOST R 54448-2011: Single burner gas-fired overhead radiant tube heaters for non-domestic use. Part 1. Safety requirements
GOST R 54482-2011: Piping connections for general-use hydraulic fluid power. Hose fittings with metric stud ends and O-ring. Technical requirements
RD 22-207-88: Lifting machines. General requirements and production standards
RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.