GOST 31383-2008
ГОСТ 31383-2008
|
|
Protection against corrosion of concrete and reinforced concrete constructions. Test methods
Защита бетонных и железобетонных конструкций от коррозии. Методы испытаний
Status: Effective - Introduced for the first time
This standard establishes methods for determining and testing the corrosion resistance of heavy and light concrete of dense structure according to GOST 25192, including fine-grained concrete on binders based on portland cement clinker according to GOST 10178, GOST 22266, GOST 30515, GOST 31108, steel reinforcement and protective coatings
Настоящий стандарт устанавливает методы определения и испытаний коррозионной стойкости тяжелых и легких бетонов плотного строения по ГОСТ 25192, в том числе мелкозернистых бетонов на вяжущих на основе портландцементного клинкера по ГОСТ 10178, ГОСТ 22266, ГОСТ 30515, ГОСТ 31108, стальной арматуры и защитных покрытий
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/15/2009
SKU: RUSS71663
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.99 Protection of buildings, inside and out, other aspects »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.99 Protection of buildings, inside and out, other aspects »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh39 Test methods. Packaging. Marking »
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10181-2000: Concrete Mixtures Test method
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 12004-81: Reinforcing-bar steel. Tensile test methods
GOST 12026-76: Filter paper for laboratory application
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13320-81: Automatic instruments of continuous action used for gas analysis. General requirements
GOST 13646-68: Glass mercury thermometers designed for precise measurements
GOST 1381-73: Hexamethylenetetramine for industrial use. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 17792-72: Standard reference silver-silver chloride saturate electrode of second class
GOST 18105-86: Concretes. Rules for the strength control
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 19906-74: Sodium nitrite technical. Technical conditions
GOST 22266-76: Sulphate resisting cements. Specifications
GOST 22266-94: Sulphate-resistant cements. Specifications
GOST 22688-77: Lime for building purposes. Test methods
GOST 22867-77: Reagents. Ammonium nitrate. Specifications
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 23932-90: Laboratory glassware and equipment. General specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 25192-82: Concretes. Classification and general technical requirements
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 25706-83: Magnifiers
GOST 25794.1-83: Reagents. Methods of preparation of standard volumetric solutions for acid-base titration
GOST 25794.2-83: Reagents. Methods for preparation of standard volumetric solutions for redox titration
GOST 25794.3-83: Reagents. Methods of preparation of standard volumetric solutions for precipitation titration, non-aqueous titration and other titrimetric methods
GOST 2603-79: Reagents. Acetone. Specifications
GOST 28574-90: Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing
GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements
GOST 29252-91: Laboratory glassware. Burettes. Part 2. Burettes for which no waiting time is specified
GOST 30515-97: Cements General specifications
GOST 31108-2003: General structural Portland clinker cements. Specifications
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 4142-77: Reagents. Calcium nitrate tetrahydrate. Specifications
GOST 4233-77: Reagents. Sodium chloride. Specifications
GOST 4234-77: Reagents. Potassium chloride. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4328-77: Reagents. Sodium hydroxide. Specifications
GOST 4919.1-77: Reagents and matters of special purity. Methods for preparation of indicators solutions
GOST 5009-82: Abrasive cloth. Specifications
GOST 6709-72: Distilled water. Specifications
GOST 7402-84: Electric fans for domestic use
GOST 8.207-76: Direct measurements with multiple observations. Observation data processing methods
GOST 8711-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2. Special requirements for ammeters and voltmeters
GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.
GOST 949-73: Small and medium volume steel cylinders for gases for pp ≤ 19.6 MPa (200 kgf/cm2) Specifications
GOST 9696-82: Multi-revolution dial indicators graduated in 0,001 and 0,002 mm. Types. Basic parameters. Specifications
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 53231-2008: Concretes. Rules for control and assessment of strength
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
The Document is Referenced By:
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 28574-2014: Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing
GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency
GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements
GOST 32016-2012: Products and systems for the protection and repair of concrete structures. General requirements
GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works
GOST R 56378-2015: Materials and systems for the protection and repair of concrete structures. Requirements for products repair and bond connections for rehabilitation of structures
GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications
GOST R 70520-2022: Reinforcement for reinforced concrete structures. Methods for determining the mechanical properties at high temperatures
ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 340.1325800.2017: Reinforced concrete and concrete structures of cooling towers. Design rules
SP 349.1325800.2017: Concrete and reinforced concrete structures. Rules of structural reinforcement and repair
SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
STO DOKTOR BETON 68686983-001-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Classification. Nomenclature of indicators. Technical requirements
STO DOKTOR BETON 68686983-002-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technical specifications and quality characteristics
STO NAAG 3.1-2013: Designs using autoclaved aerated concrete in the construction of buildings and structures. Design and Construction Rules
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.