imgalt

GOST 31938-2012

ГОСТ 31938-2012

Fiber-reinforced polymer bar for concrete reinforcement. General specifications

Арматура композитная полимерная для армирования бетонных конструкций. Общие технические условия

Status: Effective - Introduced for the first time. IUS 3-2014

The standard establishes general technical conditions and applies to composite polymer reinforcement of a periodic profile (ACP), intended for the reinforcement of conventional and prestressed building structures and elements used in environments with varying degrees of aggressive impact, meeting the fire resistance requirements of GOST 30247 and fire safety according to GOST 30403 The standard does not apply to composite polymer rods of a smooth profile and composite polymer flexible bonds.

Стандарт устанавливает общие технические условия и распространяется на композитную полимерную арматуру периодического профиля (АКП), предназначенную для армирования обычных и предварительно напряженных строительных конструкций и элементов, эксплуатирующихся в средах с различной степенью агрессивного воздействия, отвечающих требованиям огнестойкости по ГОСТ 30247 и пожарной безопасности по ГОСТ 30403. Стандарт не распространяется на композитные полимерные стержни гладкого профиля и композитные полимерные гибкие связи.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/27/2012

SKU: RUSS71665

Price: $637.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.52 Reinforced concrete and concrete structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh13 Concretes and mortars »


The Document is Replaced With:

GOST 31938-2022: Polymer composite reinforcement for reinforcement of concrete structures. General technical specifications

The Document References:

GN 2.1.6.1338-03: Maximum allowable concentrations (MACs) of pollutants in the air of residential areas

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation

GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12004-81: Reinforcing-bar steel. Tensile test methods

GOST 12423-66: Plastics. Standard atmospheres for conditioning and testing specimens

GOST 14192-96: Cargo marking

GOST 14359-69: Plastics. Testing methods. General requirements of the methods of mechanical testing

GOST 15139-69: Plastics. Methods for the determination of density (mass density)

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 166-89: Vernier callipers. Specifications

GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises

GOST 17308-88: Twines. Specifications

GOST 28840-90: Machines for tension, compression and bending tests of materials

GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei

GOST 30247.0-94: Elements of building constructions. Fire-resistance test methods. General requirements

GOST 30403-96: Building structures fire hazard test method

GOST 3560-73: Sealing tepe

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4651-82: Plastics. Compression test method

GOST 6507-90: Micrometers. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 8.207-76: Direct measurements with multiple observations. Observation data processing methods

SanPiN 2.1.2.729-99: Polymer and polymer containing construction. Materials. Products and structures. Hygienic requirements

SanPiN 2.2.3.1385-03: Hygienic requirements for enterprises producing building materials and structures

SanPiN 2.6.1.2523-09: Norms of radiation safety

SP 1.1.1058-01: Organization and procedures industrial monitoring of sanitary rules observance and sanitary epidemiological (preventive) measures

SP 2.2.2.1327-03: Hygienic regulations for organization of technological processes, production equipment and working instrument

The Document is Referenced By:

GOST 17608-2017: The concrete paving slabs. Specifications

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 23009-2016: Prefabricated concrete and reinforced concrete constructions and products. Symbols (marks)

GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements

GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications

GOST 32486-2013: Polymer composite frame for reinforcement of concrete structures. Methods for determination of durability characteristics

GOST 32486-2015: Fibre-Reinforced Polymer Bar for Concrete Reinforcement. Methods for determination of structural and thermo-mechanical characteristics

GOST 32486-2021: Polymer composite reinforcement for reinforcement of concrete structures. Methods for determination of structural characteristics

GOST 32487-2013: Polymer composite frame for reinforcement of concrete structures. Methods for determination of characteristics of resistance to the corrosive media

GOST 32487-2015: Fibre-reinforced polymer bar for concrete constructions. Methods for determination of characteristics of resistance to the corrosive media

GOST 32492-2013: Polymer composite frame for reinforcement concrete structures. Method for determination of physical and mechanical properties

GOST 32492-2015: Fibre-reinforced polymer bar for concrete reinforcement. Determination of physical-mechanical properties

GOST R 56209-2014: Rods composite polymer for the manufacture of cores uninsulated wires. Specifications

GOST R 56710-2015: Connections on the pasted cores for wooden structures. Specifications

GOST R 58199-2018: Mining equipment. Anchor bolt of composite materials. General specifications

GOST R 58558-2019: Wooden structures. Glued rods Test methods for determining standard values ​​of mechanical characteristics

ODM 218.2.066-2016: Guidelines for the use of anchor piles and micropiles as part of the engineering protection of roads

ODM 218.2.074-2016: Guidelines for the use of structural composite anchors for the device of transverse and longitudinal expansion joints instead of steel anchor rods in hard type coatings

ODM 218.2.075-2016: Guidelines for the use of structural composite grids and gratings instead of steel when used to strengthen the arches of tunnels and retaining walls by the method of gunning

Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation

SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products

SP 295.1325800.2017: Concrete structures reinforced with fibre-reinforced polymer bars. Design rules

SP 339.1325800.2017: Designs from cellular concrete. Rules of design

SP 375.1325800.2017: Industrial chimneys. Design rules

SP 382.1325800.2017: Glued laminated wooden structures on glued rods. Calculation methods

SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 95.13330.2016: Concrete and reinforced concrete structures made of dense calcium-silicate concrete

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!