GOST R 53763-2009
ГОСТ Р 53763-2009
|
|
Natural combustible gases. Determination of water dew point temperature
Газы горючие природные. Определение температуры точки росы по воде
Status: Effective - Introduced for the first time
This standard establishes requirements for making water dew point temperature (TTP) measurements by visual and automatic condensation and sorption (dielectric, coulometric, piezoelectric, interference) methods in combustible natural gas (HGP) coming from field preparation facilities, underground gas storage facilities and gas processing factories to trunk gas pipelines, transported through them and supplied to consumers, as well as used as fuel for engines internally go combustion
Настоящий стандарт устанавливает требования к выполнению измерений температуры точки росы по воде (ТТР) визуальными и автоматическими конденсационными и сорбционными (диэлькометрическим, кулонометрическим, пьезоэлектрическим, интерференционным) методами в газах горючих природных (ГГП), поступающих с промысловых установок подготовки, подземных хранилищ газа и газоперерабатывающих заводов в магистральные газопроводы, транспортируемых по ним и поставляемых потребителям, а также применяемых в качестве топлива для двигателей внутреннего сгорания
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/15/2009
SKU: RUSS71692
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.2 Testing and control of products of fuel and energy industry »
4.2.2 Oil, oil products and gas »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.060 Natural Gas »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.060 Natural Gas »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L1 Inorganic chemical products »
L19 Test methods. Packaging. Marking »
National Standards for OKSTU »
OIL, PETROLEUM PRODUCTS, GAS »
Control methods (testing, analysis, measurements) »
The Document References:
Federal Law 184-FZ: About technical regulation
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.020-76: Explosion proof electrical apparatus. Terms and definitions. Classification. Marking
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 13045-81: Rota meters
GOST 14162-79: Steel tubes of small dimensions (capillary)
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 20448-90: Liquefied hydrocarbon fuel gases for domestic use. Specifications
GOST 21443-75: Liquefied hydrocarbon gases for export
GOST 22782.0-81: Explosion-proof electrical equipment
GOST 22782.5-78: Explosion proof electrical apparatus with the type of protection «intrinsically-safe electrical circuit». Technical requirements and test methods
GOST 22782.6-81: Explosion proof electrical apparatus. Flameproof enclosure. Technical requirements and Test methods.
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 27578-87: Liquefied hydrocarbon gases for motor transport gases
GOST 28498-90: Liquid-in-glass thermometers
GOST 31370-2008: Natural gas. Sampling guidelines
GOST 5556-81: Medical absorbent cotton
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 8050-85: Carbon dioxide,
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 51104-97: Exported liquefied hydrocarbon gases from Russian region. Specifications
GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements
GOST R 51330.10-99: Electrical apparatus for explosive gas atmospheres. Part 11. Spark-free power line, type i
GOST R 51330.1-99: Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus
GOST R 51330.5-99: Explosion-proof electrical equipment. Part 4. Method for determining the self-ignition temperature
GOST R 51652-2000: Rectified ethyl alcohol of food raw material. Specifications
GOST R 52087-2003: Liquefied hydrocarbon fuel gases. Specifications
GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions
NPB 110-03: The list of buildings, constructions, rooms and equipment subject to protection by automatic extinguishing units and automatic fire alarm
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 08-622-03: Safety Rules and Regulations For Gas Processing and Production Plants
PB 08-624-03: Safety Regulations for oil and gas industry
PPB 01-03: On Approval Of Fire Safety Standards In The Russian Federation
RMG 75-2004: State system for ensuring the uniformity of measurements. Measurements of substances moisture. Terms and definitions
SanPiN 2.1.6.1032-01: Hygienic requirements to quality assurance of atmospheric air in inhabited areas
VPPB 01-04-98: Fire prevention rules for enterprises and organizations of the gas industry
The Document is Referenced By:
Decision 112: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including rules of sampling, necessary for the application and implementation of the requirements of technical regulation of the Eurasian Economic Union "On safety of combustible natural gas prepared for transportation and (or) use" (TR EAEC 046/2018) and conformity assessment of technical regulation
GOST 34867-2022: Natural gas prepared for transportation through the main gas pipelines. Technical conditions
GOST 5542-2014: Natural fuel gases for commercial and domestic use. Specifications
GOST R 57413-2017: Combustible natural gas. State reference materials on the basisd magistral gas. Specification
GOST R 57851.1-2017: Gas-condensate mixture. Part 1. Separation gas. Compositional analysis by gas chromatography method
GOST R 8.741-2019: State system for ensuring the uniformity of measurements. The volume of natural gas. General requirements for measurement procedures
GOST R 8.816-2013: State system for ensuring the uniformity of measurements. Natural gas. Volumetric heat (energy) of combustion. Method for measurement using the bomb calorimeter
Letter 3841-OG/03: About a typo in GOST 5542-2014
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.