GOST R ISO 14284-2009
ГОСТ Р ИСО 14284-2009
|
|
Steel and iron. Sampling and preparation of samples for determination of chemical composition
Сталь и чугун. Отбор и подготовка образцов для определения химического состава
Status: Effective - Introduced for the first time
This standard establishes methods for the selection and preparation of samples for the determination of the chemical composition of pig iron, cast iron and steel. Methods apply to sampling of liquid and solid metals.
Настоящий стандарт устанавливает методы отбора и подготовки образцов для определения химического состава чугуна в чушках, литейного чугуна и стали. Методы распространяются на отбор проб жидкого и твердого металлов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/11/2009
SKU: RUSS71706
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.1 Ferrous metals »
ISO classifier »
77 METALLURGY »
77.080 Ferrous metals »
77.080.10 Cast iron »
National standards »
77 METALLURGY »
77.080 Ferrous metals »
77.080.10 Cast iron »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V39 Test methods. Packaging. Marking »
National Standards for OKSTU »
ORE RAW MATERIALS, NONMERAL, SECONDARY FERROUS METALLURGY AND COKE »
Control methods (testing, analysis, measurements) »
The Document is Referenced By:
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 19281-2014: High strength rolled steel. General specification
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 801-2022: Rolled bearing steel. Technical conditions
GOST R 51045-2014: Rails of ways technological railways transport. General specifications
GOST R 51685-2013: Railway rails. General specifications.
GOST R 55080-2012: Cast iron. Method of X-ray fluorescence (XRF) analysis
GOST R 55820-2013: Switch and crossing rails. Specifications
GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications
GOST R 58126-2018: Steel wire for mechanical springs. Oil hardened and tempered spring steel wire
GOST R 58127-2018: Steel wire for mechanical springs. Stainless spring steel wire
GOST R 58136-2018: Steel wire for mechanical springs. Cold-drawn, patented spring steel wire of unalloyed steel
GOST R ISO 10153-2011: Steel. Determination of boron content. Curcumin spectrophotometric method
GOST R ISO 10280-2010: Steel and iron. Determination of titanium content. Diantipyrylmethane spectrophotometric method
GOST R ISO 15353-2014: Steel and iron. Determination of tin content. Flame atomic absorption spectrometric method (extraction as Sn-SCN)
GOST R ISO 16918-1-2013: Steel and iron. Inductively coupled plasma mass spectrometric method. Part 1. Determination of tin, antimony, cerium, lead and bismuth content
GOST R ISO 16962-2012: Zinc and/or aluminium based coatings on steel. Determination of coating thickness, chemical composition and mass per unit area by glow discharge atomic emission spectrometry method
GOST R ISO 17925-2012: Zinc and/or aluminium based coatings on steel. Determination of chemical composition and coating mass per unit area. Gravimetric, atomic emission spectrometry with inductively coupled plasma and flame atomic absorption spectrometry methods
GOST R ISO 22033-2014: Nickel alloys. Determination of niobium. Inductively coupled plasma/atomic emission spectrometric method
GOST R ISO 22725-2014: Nickel alloys. Determination of tantalum. Inductively coupled plasma atomic emission spectrometric method
GOST R ISO 4940-2010: Steel and iron. Determination of nickel content. Flame atomic absorption spectrometric method
GOST R ISO 4943-2010: Steel and iron. Determination of copper content. Flame atomic absorption spectrometric method
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.