imgalt

GOST R 52948-2008

ГОСТ Р 52948-2008

Fittings from copper and copper alloys with compression ends for use with copper tubes. Specifications

Фитинги из меди и медных сплавов для соединения медных труб способом прессования. Технические условия

Status: Effective - Introduced for the first time

This standard applies to fittings made of copper and copper alloys, designed to be connected by pressing copper pipes manufactured according to GOST R 52318, and sets out the requirements for press joints used in the installation of pipelines in drinking water supply systems, hot and cold water supply ) heating, sewage, water treatment facilities, gas supply, as well as in heating and cooling systems. The standard establishes the permissible operating temperatures, maximum operating pressure, range, technical requirements, acceptance rules, control and testing methods, marking and packaging of fittings.

Настоящий стандарт распространяется на фитинги из меди и медных сплавов, предназначенные для соединения способом прессования медных труб, изготовленных по ГОСТ Р 52318, и устанавливает требования к пресс-соединениям, используемым при монтаже трубопроводов в системах питьевого водоснабжения, холодного и горячего водоснабжения, водяного (парового) отопления, канализации, водоочистных сооружений, газоснабжения, а также в нагревательных и охлаждающих системах. Стандарт устанавливает допустимые эксплуатационные температуры, максимальное эксплуатационное давление, сортамент, технические требования, правила приемки, методы контроля и испытаний, маркировку и упаковку фитингов

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 8/14/2008

SKU: RUSS71808

Price: $653.00



imgalt

The Product is Contained in the Following Classifiers:

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » welding equipment »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Welding work » Soldering »

Welding regulations » Main materials » Non-ferrous metals »

Welding regulations » Welding materials » Gases »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.6 Metal products »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.15 Non-ferrous metal pipes »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.15 Pipes from non-ferrous metals »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V6 Pipes metal and pipe products » V64 Pipes from non-ferrous metals and alloys »


The Document References:

Federal Law 184-FZ: About technical regulation

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10354-82: Polyethylene film Specifications

GOST 12082-82: Roof boarding for consignments up to 500 kg. General specifications

GOST 13938.10-78: Copper. Methods for the determination of antimony

GOST 13938.11-78: Copper. Method for the determination of arsenic

GOST 13938.12-78: Copper. Methods for the determination of bismuth

GOST 13938.13-93: Copper. Methods of determination of oxygen

GOST 13938.15-88: Copper. Methods for determination of chromium and cadmium

GOST 13938.1-78: Copper. Methods for determination of copper

GOST 13938.2-78: Copper. Methods for determination of sulphur

GOST 13938.3-78: Copper. Method for determination of phosphorus

GOST 13938.4-78: Copper. Methods for determination of iron

GOST 13938.5-78: Copper. Methods for determination of zinc

GOST 13938.6-78: Copper. Methods for the determination of nickel

GOST 13938.7-78: Copper. Methods for the determination of lead

GOST 13938.8-78: Copper. Methods for the determination of tin

GOST 13938.9-78: Copper. Methods for determination of silver

GOST 14192-96: Cargo marking

GOST 15102-75: Universal metallic closed container of nominal gross mass 5,0 tn. Specifications

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 166-89: Vernier callipers. Specifications

GOST 18829-73: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications

GOST 1953.10-79: Tin bronze. Methods for the determination of stibium

GOST 1953.11-79: Tin bronze. Methods for the determination of bismuth

GOST 1953.12-79: Tin bronze. Methods for the determination of sulphur

GOST 1953.13-79: Tin bronze. Method for the determination of manganese

GOST 1953.14-79: Tin bronze. Method for the determination of magnesium

GOST 1953.15-79: Tin bronze. Methods for the determination of arsenic

GOST 1953.16-79: Tin bronze. Method for the determination of titanium

GOST 1953.1-79: Tin bronze. Methods for the determination of copper

GOST 1953.2-79: Tin bronze. Methods for the determination of lead

GOST 1953.3-79: Tin bronze. Methods for the determination of tin

GOST 1953.4-79: Tin bronze. Methods for the determination of phosphorus

GOST 1953.5-79: Tin bronze. Methods for the determination of nickel

GOST 1953.6-79: Tin bronze. Methods for the determination of zinc

GOST 1953.7-79: Tin bronze. Methods for the determination of iron

GOST 1953.8-79: Tin bronze. Methods for the determination of aluminium

GOST 1953.9-79: Tin bronze. Methods for the determination of silicon

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 22225-76: Containers multipurpose gross weight 0,625 and 1,25 t. Specifications

GOST 24231-80: Non-ferrous metals and alloys. General requirements for sampling and sample preparation for chemical analysis

GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions

GOST 25086-87: Nonferrous metals and their alloys. General requirements for methods of analysis

GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements

GOST 269-66: Rubber. General requirements for the physical mechanical tests

GOST 270-75: Rubber. Method of the determination elastic and tensile stress-strain properties

GOST 2768-84: Acetone technical. Specifications

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 3282-74: General-purpose low-carbon steel wire. Specifications

GOST 3560-73: Sealing tepe

GOST 4461-77: Reagents. Nitric acid. Specifications

GOST 613-79: Tin foundry bronzes. Grades

GOST 6507-90: Micrometers. Specifications

GOST 859-2001: Copper. Grades

GOST 9557-87: Flat wooden pallets with dimensions 800ґ1200 mm

GOST 9717.1-82: Copper. Method of spectral analysis of metal standard specimens with photoelectrical registration of spectrum

GOST 9717.2-82: Copper. Method of spectral analysis of metal standard specimens with photographic registration of spectrum

GOST 9717.3-82: Copper. Method of spectral analysis of oxide standard specimens

GOST ISO 7323-96: Rubber raw and unvulcanized compounded. Determination of plasticity number and recovery number. Parallel plate method

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 52318-2005: Round copper tubes for water and gas. Specifications

GOST R 52901-2007: Corrugated board for products packaging. General specifications

GOST R 52922-2008: Fittings from copper and copper alloys for capillary soldering to copper tubes. Specifications

The Document is Referenced By:

GOST R 52949-2008: Fittings-adapters from copper and copper alloys for connecting the pipelines. Specifications

GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General

GOST R 58095.2-2018: Gas distribution systems. Requirements for gas consumption networks. Part 2. Copper gas pipelines

MSN 42-01-2011: Gas distribution systems

SP 402.1325800.2018: Residential buildings. Rules for the design of gas consumption systems

SP 73.13330.2016: Internal sanitary-technical systems

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!