GOST EN 12417-2006
ГОСТ ЕН 12417-2006
|
|
Safety of metal-working machine tools. Machining centres
Безопасность металлообрабатывающих станков. Центры обрабатывающие для механической обработки
Status: Not effective - Canceled. Registration information 310-st dated 06/05/2018 (official website of Rosstandart); IUS 8-2018
This standard establishes the safety requirements and defines the measures to be taken by persons carrying out the design, construction and supply (including installation
Настоящий стандарт устанавливает требования безопасности и определяет меры, которые должны быть предприняты лицами, осуществляющими проектирование, конструирование и поставку (включая монтаж/демонтаж, транспортировку и техническое обслуживание) обрабатывающих центров для механической обработки. Настоящий стандарт применяется к станкам, изготовленным после даты ��го введения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
8/16/2007
SKU: RUSS71891
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.040 Industrial automated systems »
National standards »
25 MECHANICAL ENGINEERING »
25.040 Industrial automated systems »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.040 Industrial automated systems »
25.040.01 Industrial automation systems in general »
National standards »
25 MECHANICAL ENGINEERING »
25.040 Industrial automated systems »
25.040.01 General industrial automation systems »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G8 Machinery and equipment of universal application »
G81 Metal-working machines »
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation
GOST 1.5-2001: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. General requirements for structure, drafting, presentation, content and indication
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 30457-97: Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points. Engineering method
GOST 30683-2000: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections
GOST 30691-2001: Noise of machines. Declaration and verification of noise emission values
GOST 30869-2003: Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics
GOST 31169-2003: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ
GOST 31177-2003: Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics
GOST EN 1005-2-2005: Safety of machinery. Human physical performance. Part 2. Manual handling of machinery and component parts of machinery
GOST EN 1760-1-2004: Safety of machinery. Pressure sensitive protective devices. Part 1. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
GOST EN 1837-2002: Safety of machinery. Integral lighting of machines
GOST ISO 13851-2006: Safety of machinery. Two-hand control devices. Functional aspects and design principles
GOST ISO 13855-2006: Safety of machinery. Positioning of protective equipment with respect to the approach speeds of parts of the human body
GOST ISO 14123-1-2000: Safety of machinery. Reduction of risks to health from hazardous substances emitted by machinery. Part 1. Principles and technical requirements
GOST ISO/TO 12100-1-2001: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terms, procedure
GOST ISO/TO 12100-2-2002: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles and technical requirements
GOST R 51401-99: Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
The Document is Referenced By:
Decision 73: On the Program for the development (amendment, revision) of interstate standards, resulting in the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of machinery and equipment" (TR CU 010/2011), as well as interstate standards that contain rules and methods of research (tests) and measurements, including rules of sampling, necessary for the application and enforcement of the technical regulations of the Customs Union "On safety of machines and equipment" (TR
GOST R 54431-2011: Metal-working machines. General safety requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
