GOST R 51732-2001
ГОСТ Р 51732-2001
|
|
Input-distributional boards for dwellings and public buildings. General specifications
Устройства вводно-распределительные для жилых и общественных зданий. Общие технические условия
Status: Not effective - Canceled. Registration information 1677-st dated November 22, 2013 (official site of Rosstandart)
This standard applies to input-distributing devices (ASU) intended for receiving, metering and distribution of electrical energy in electrical installations of residential and public buildings, as well as for protecting distribution and group circuits outgoing from ASU during overloads and short circuits. The standard applies to the ASU, connected to the power supply networks of 380/220 V AC at 50-60 Hz with a solidly earthed neutral
Настоящий стандарт распространяется на вводно-распределительные устройства (ВРУ), предназначенные для приема, учета и распределения электрической энергии в электроустановках жилых и общественных зданий, а также для защиты отходящих от ВРУ распределительных и групповых цепей при перегрузках и коротких замыканиях. Стандарт распространяется на ВРУ, присоединяемые к питающим электрическим сетям напряжением 380/220 В переменного тока частотой 50-60 Гц с глухозаземленной нейтралью
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
4/5/2001
SKU: RUSS71909
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.240 Power transmission networks and distribution networks »
29.240.30 Control equipment for electrical power systems »
National standards »
29 ELECTRICAL ENGINEERING »
29.240 Power transmission networks and distribution networks »
29.240.30 Control equipment for electrical power systems »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.240 Power transmission networks and distribution networks »
29.240.99 Equipment related to power and distribution networks »
National standards »
29 ELECTRICAL ENGINEERING »
29.240 Power transmission networks and distribution networks »
29.240.99 Equipment related to power and distribution networks »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E1 Power plants, substations and distribution devices »
E17 Switchgears »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Complete devices for the distribution of electrical energy for general use »
The Document References:
GOST 10434-82: Electric contact connections. Classification. General technical requirements
GOST 11516-94: Hand-held hot-line tools
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.4.026-76: Signal colors and safety signs
GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications
GOST 14192-96: Cargo marking
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 16962.1-89: Electrical articles. Test methods as to environments climatic factors resistance
GOST 16962.2-90: Electrotechnical product
GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability
GOST 18690-82: Cables, wires, cord and armature. Marking, packing, carriage and storage
GOST 19734-80: Input control devices for residential and public buildings
GOST 2.601-95: Operational documents
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 21991-89: Electrotechnical equipment. Standard directions of movement for actuators which control the operation of electrical apparatus
GOST 22789-94: Low-voltage unitized devices
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 27483-87: Fire hazard testing. Test methods. Glow-wire test and guidance
GOST 27924-88: Fire-hazard testing. Test methods. Bad-connection test with heaters
GOST 30331.1-95: Electrical installations of buildings. General
GOST 30331.2-95: Electrical installations of buildings. Part 3. General characteristics
GOST 30331.3-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against electric shock
GOST 4751-73: Screw rings. Specifications
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes
GOST R 50462-92: Identification of conductors by colours or numerals
GOST R 50571.10-96: Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Chapter 54. Earthing arrangements and protective conductors
GOST R 50571.1-93: Electrical installations of buildings. General
GOST R 50571.2-94: Electrical installations of buildings. Part 3. General characteristics
GOST R 50571.3-94: Electrical installations of buildings. Part 4. Protection for safety. Protection against elecric shock
GOST R 51321.3-99: Low-voltage switchgear and control gear assemblies. Part 3. Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use. Distribution boards
GOST R IEC 536-94: Classification of electrical and electronic equipment with regard to protection against electric shock
The Document is Referenced By:
GOST 30339-95: Mobile (inventory) buildings of metal or with metal frame power supply and electrical safety for street trade and household services. Technical requirements
GOST R 55716-2013: High-voltage switchgear. General specifications
RMD 31-10-2011 Sankt-Peterburg: Guidelines for the design of pre-school educational institutions (including classes with compensatory education)
RMD 31-15-2012 Sankt-Peterburg: Design Guide for Special (Corrective) Educational Institutions for Students and Pupils with Disabilities
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
