imgalt

GOST R 52906-2008

ГОСТ Р 52906-2008

Equipment of the aviation fuelling system. General technical requirements

Оборудование авиатопливообеспечения. Общие технические требования

Status: Not effective - Superseded. Information about the registration of 2118-st dated December 28, 2017 (the official website of Rosstandart); IUS 3-2018

This standard applies to new or upgraded samples of ground-based equipment intended for aviation fuel supply of air transport. The standard defines the basic principles and trends of improving the competitiveness of equipment, ensuring the safe implementation of technological processes for refueling aircraft with aviation fuel and special fluids, observing fire safety rules and environmental protection, taking into account the peculiarities of use in ordinary operating conditions in different climatic zones of the Russian Federation

Настоящий стандарт распространяется на новые или модернизированные образцы наземной техники, предназначенные для авиатопливообеспечения воздушных перевозок. Стандарт определеяет основные принципы и тенденции повышения конкурентоспособности оборудования, обеспечения безопасного выполнения технологических процессов заправки воздушных судов авиатопливом и спецжидкостями, соблюдения правил пожарной безопасности и охраны окружающей среды с учетом особенностей использования в рядовых условиях эксплуатации в различных климатических зонах Российской Федерации

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 1/24/2008

SKU: RUSS71916

Price: $669.00



imgalt

The Product is Contained in the Following Classifiers:

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.8 For transport » 3.8.2 For tank wagons, tank trucks and containers »

ISO classifier » 49 Aircraft and space technology » 49.100 Ground handling and maintenance equipment »

National standards » 49 AVIATION AND SPACE TECHNOLOGY » 49.100 Ground handling and maintenance equipment »

National Standards for KGS (State Standards Classification) » Latest edition » D Vehicles and packaging » D1 Aviation » D18 Aerodrome Equipment »

National Standards for OKSTU » AVIATION EQUIPMENT » Aerodrome operational equipment »


The Document is Replaced With:

GOST R 18.12.02-2017: Technology of the aviation fueling. Installation of the aviation fuel supply typical schemes.General technical requirements

The Document References:

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.020-76: Explosion proof electrical apparatus. Terms and definitions. Classification. Marking

GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements

GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements

GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements

GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements

GOST 12.4.124-83: Occupational safety standards system. Means of static electricity protection. General technical requirements

GOST 12017-81: Fifth-wheel king pins of automobile semi-trailers. Types and basic dimensions

GOST 12105-74: Truk tractors and semi-trailers. Connecting dimensions

GOST 12532-88: Direct-acting safety valves. Main parameters

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 2.103-68: Unified system for design documentation. Stages of designing

GOST 2.114-95: Unified system for design documentation. Specifications

GOST 2.503-90: Amendment rules

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.602-95: Unified system for design documentation. Repair documents

GOST 2.603-68: Unified system for design documentation. Rules of modification in maintenance and repair documentation

GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents

GOST 20772-81: Connecting devices for technical means for fuelling, pumping, loading-unloading, transport and storage of raw oil and petroleum products. Types, basic parameters and sizes. General technical requirements

GOST 21130-75: Electrical articles. Grounding terminals and grounding signs

GOST 2349-75: System 'hook-eye' drawbar couplings for road- and tractor-trailer trains. Basic parameters and dimensions. Technical requirements

GOST 2517-85: Crude oil and petroleum products. Methods of sampling

GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements

GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability

GOST 27472-87: Specialized road vehicles. Labour safety, ergonomics. Requirements

GOST 28247-89: Fifth wheel couplings of semi-trailer tractors. Types, basic dimensions and technical requirements

GOST 30600-97: Fifth-wheel king coupling pins of automobile semitrailers. Technical requirements and test methods

GOST 8.346-2000: State system for ensuring the uniformity of measurements. Steel horizontal cylindrical tanks. Calibration methods

GOST 8.417-2002: State system for ensuring the uniformity of measurements. Units of quantities

GOST 8.570-2000: State system for ensuring the uniformity of measurements. Steel vertical cylindrical tanks. Calibration methods

GOST 8769-75: Outer lighting devices for automobiles, buses, trolleybuses, tractors, trailers and semitrailers

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols

GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility

GOST 9544-93: Pipeline cut-off valves

GOST R 1.0-92: State system for standardization of the Russian Federation. Basic principles

GOST R 1.2-92: State system for standardization of the Russian Federation. Procedure for developing state standards

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

GOST R 41.48-2004: Uniform provisions concerning the approval of vehicles with regard to the installation of lighting and light-signalling devices

GOST R 41.58-2001: Uniform provisions concerning the type approval of: I. Rear underrun protective devices (RUPDs); II. Vehicles with regard to the installation of a RUPD of an approved type; III. Vehicles with regard to their rear underrun protection (RUP)

GOST R 50553-93: Industrial purity. Filters and their elements. Specification

GOST R 50586-93: Fifth-wheel king coupling pins of automobile semitrailers. Technical requirements and test methods

GOST R 50913-96: Road vehicles for transportation and fuelling of petroleum products. Types, parameters and general technical requirements

GOST R 51330.9-99: Electrical apparatus for explosive gas atmospheres. Volume 10. Classification of hazardous areas

GOST R 52051-2003: Power-driven vehicles and trailers. Classification and definitions

GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

GOST R 8.595-2004: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements for procedures of measurements

GOST R ISO 9001-2001: Quality management systems. Requirements

MI 2304-94: Metrological Monitoring and Supervision by Metrological Services of Juridical Persons

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-584-03: Rules of design, manufacturing and acceptance of welded steel vessels and apparatuses

PB 03-585-03: Process Pipelines Design and Safe Operation Rules

PB 03-605-03: Rules of design of vertical cylindrical steel tanks for oil and petroleum products

PB 09-560-03: Rules for industrial safety of oil storage bases and oil product storages

PB 10-611-03: Installation and safe operation of hoists (towers)

RD 36-62-00: Hoisting equipment. General technical requirements.

RMG 63-2003: State system for ensuring the uniformity of measurements. Providing measurement efficiency in control of technological processes. Metrological expertise of the technical documentation

SNiP 2.11.03-93: Storage of petroleum and petroleum products. Fire safety norms.

SNiP 3.05.05-84: Processing equipment and process pipelines

The Document is Referenced By:

GOST R 18.12.01-2015: Technology of the aviation fuelling. Functional and technological parameters of airfield fuelling tankers (tankers). Customer requirements

GOST R 18.3.01-2016: Technology of the aviation fueling. Typical schemes

GOST R 53543-2009: Aircraft and helicopter ground support equipment. General technical requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!