GOST R 53843-2010
ГОСТ Р 53843-2010
|
|
Engines of vehicles. Piston rings. Technical requirements and test methods
Двигатели автотранспортных средств. Кольца поршневые. Технические требования и методы испытаний
Status: Effective - Introduced for the first time
This standard applies to cast iron, steel and composite piston rings of internal combustion engines of motor vehicles and motor vehicles of normal and repair dimensions.
Настоящий стандарт распространяется на чугунные, стальные и составные поршневые кольца двигателей внутреннего сгорания автотранспортных средств и мототранспортных средств нормальных и ремонтных размеров
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
7/7/2010
SKU: RUSS71924
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
018/2011 TR CU. On safety of wheeled vehicles »
Regulations and standards (to 018/2011 TR CU) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.1 Motor vehicles and equipment »
ISO classifier »
43 ROAD TRANSPORT TECHNOLOGY »
43.060 Internal combustion engines for road vehicles »
43.060.10 Cylinder block and its components »
National standards »
43 ROAD TRANSPORT TECHNOLOGY »
43.060 Internal combustion engines for road vehicles »
43.060.10 Cylinder block and its components »
National Standards for KGS (State Standards Classification) »
Latest edition »
D Vehicles and packaging »
D2 Cars, tractors and tow trucks »
D24 automotive engines and parts for them »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 21997-76: Steel flattened strip of high strength
GOST 2283-79: Cold-rolled tape made of tool steel and spring steel
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 621-87: Piston rings for internal combustion engines
GOST 8.050-73: State system for ensuring the uniformity of measurements. Reference conditions for linear and angular measurements
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50779.30-95: Statistical methods. Acceptance sampling. General requirements
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R ISO 2859-1-2007: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection
GOST R ISO/TR 8550-1-2007: Statistical methods. Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. Part 1. General requirements
The Document is Referenced By:
Decision 219: The list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of the technical regulations of the Customs Union "On the safety of wheeled vehicles". (TR CU 018/2011), and a list of international and regional (interstate) standards, and in their absence - national (state) standards containing the rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulations of the Customs Union "On the safety of wheeled vehicles" (TR CU 018/2011) (TR CU 018/2011) and conformity assessment of objects of technical regulation
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
