imgalt

GOST R 8.733-2011

ГОСТ Р 8.733-2011

State system for ensuring the uniformity of measurements. System for measuring of quantity and parameters of free oil gas. General metrological and technical requirements

Государственная система обеспечения единства измерений. Системы измерений количества и параметров свободного нефтяного газа. Общие метрологические и технические требования

Status: Effective - Introduced for the first time

This standard applies to measurement systems of the quantity (volume) and parameters of free oil gas used in the state regulation of ensuring the uniformity of measurements, and establishes the main metrological and technical requirements for them. This standard is used in the design, manufacture, installation and operation of systems for measuring the volume of free petroleum gas

Настоящий стандарт распространяется на системы измерений количества (объема) и параметров свободного нефтяного газа, применяемые в сфере государственного регулирования обеспечения единства измерений, и устанавливает основные метрологические и технические требования к ним. Настоящий стандарт применяют при проектировании, изготовлении, монтаже и эксплуатации систем измерений объема свободного нефтяного газа

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 7/14/2011

SKU: RUSS72043

Price: $677.16



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

PromExpert » SECTION II. METROLOGICAL » I Organizational and technical bases of metrological support » 1 Organization and management of metrological support » 1.1 Basic provisions of metrological support »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.1 Basic requirements for instruments and test equipment »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.180 Equipment for oil and gas industry » 75.180.30 Volumetric measurements and means for these measurements »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.180 Equipment for oil and gas industry » 75.180.30 Volumetric measurements and means for these measurements »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T80 Rules, norms, regulations infield of ensuring uniformity of measurements »


The Document References:

Federal Law 184-FZ: About technical regulation

GOST 12.0.004-90: Organization of training for labor safety. General rules

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.4.137-84: Special leather footwear for protection from petroleum, petroleum products, acids, alkalis, non-toxic and explosive dust

GOST 15528-86: Instruments for measuring flow rate, volume or mass of flowing fluid and gas. Terms and definitions

GOST 2.105-95: General requirements for writing documents

GOST 27574-87: Women’s suits for protection against general industrial pollution and mechanical effects

GOST 27575-87: Men's suites for protection from general occupational pollution and mechanical effects

GOST 31370-2008: Natural gas. Sampling guidelines

GOST 8.401-80: State system for ensuring the uniformity of measurements. Accuracy classes of measuring instruments. General requirements

GOST 8.586.1-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements

GOST 8.586.2-2005: State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements

GOST 8.586.3-2005: State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 3. Nozzles and Venturi nozzles. Technical requirements

GOST 8.586.4-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 4. Venturi tubes. Technical requirements

GOST 8.586.5-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure

GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements

GOST R 51330.9-99: Electrical apparatus for explosive gas atmospheres. Volume 10. Classification of hazardous areas

GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 8.596-2002: State system for ensuring the uniformity of measurement. Metrological assurance for measuring system. Main principles.

GOST R 8.615-2005: State system for ensuring the uniformity of measurements. The measuring of quantity of taken from bowels oil and oil gas. General metrological and technical requirements

GOST R 8.654-2009: State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles

MI 2667-2011: Recommendation. State system for ensuring uniformity of measurements. Consumption and quantity of liquids and gases. Measurement techniques using averaging pressure tubes ANNUBAR DIAMOND II, ANNUBAR 285, ANNUBAR 485 and ANNUBAR 585. Basic provisions

MI 2891-2004: Recommendation. GSOEI. General requirements for measurement software

MI 2955-2010: Recommendation. State system for ensuring uniformity of measurements. Typical methods of certification of software measuring devices

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PMG 96-2009: State system for ensuring the uniformity of measurements. Results and characteristics of measurement quality

PR 50.2.006-94: Procedure for calibration of measurement equipment

PR 50.2.022-99: National system for uniformity of measurements of the Kyrgyz Republic. The procedure of state control and supervision over the use and condition of measurement kits with restrictive flow orifice devices.

RD 50-411-83: Methodological instructions. liquids and gases flow rate. Measurement technique using special orifices.

RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions

RMG 62-2003: State system for ensuring the uniformity of measurements. Ensuring the effect of measurements by the control of technological processes. Estimation of the measuring error when the limited point of information

The Document is Referenced By:

GOST R 58367-2019: Arrangement of oil fields on land. Technological design

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Seamless hot-deformed steel pipes. Specifications
Language: English
Price: $57.42
imgalt
Seamless hot-deformed steel pipes. Range of sizes
Language: English
Price: $77.22
imgalt
Processing equipment and process pipelines
Language: English
Price: $155.43
imgalt
Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
Language: English
Price: $320.76
imgalt
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
imgalt
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English
Price: $1,478.07
imgalt
Unified system for design documentation. Diagrams. Kinds and types. General requirements for fulfillment.
Language: English
Price: $121.77
imgalt
Chemically resistant and heat resistant ceramic wares. The method for determination of heat resistance
Language: English
Price: $34.65
imgalt
Unified system for program documentation. Types of programs and program documents
Language: English
Price: $55.44
imgalt
Petroleum products. Method of test for water-soluble acids and alkalies
Language: English
Price: $48.51
imgalt
Unified system for design documentation. Repair documents
Language: English
Price: $196.02
imgalt
Chemical production safety passport. General requirements
Language: English
Price: $90.09
imgalt
Unified system for design documentation. Exploitative documents
Language: English
Price: $296.01
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $137.61
imgalt
Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus
Language: English
Price: $223.74
imgalt
Process piping. Standard for the stress, vibration and seismic analysis
Language: English
Price: $879.12
imgalt
Pipeline valves for nuclear stations. General specifications
Language: English
Price: $1,908.72
imgalt
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $703.89
imgalt
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Language: English
Price: $523.71
imgalt
Fish products. Canned tuna and bonito in water or oil
Language: English
Price: $159.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!