GOST R 55619-2013
ГОСТ Р 55619-2013
|
|
Renewable power engineering. Wind turbines. Protective measures. Requirements for design, operation and maintenance
Возобновляемая энергетика. Установки ветроэнергетические. Меры защиты. Требования к проектированию, эксплуатации и техническому обслуживанию
Status: Effective - Introduced for the first time. IUS 8-2014
This standard specifies requirements for measures to protect the health and safety of personnel, proper commissioning, management and maintenance of wind turbines. This standard applies to high-power wind turbines with a horizontal axis of rotation of the windwheel, which include serviced nacelles. For other designs of wind turbines (for example, with a vertical axis of rotation or less than 50 kW), the principles remain, but specific rules or requirements must be developed in accordance with their design. The standard does not apply to wind turbines produced before the date of its official publication.
Настоящий стандарт определяет требования к мерам защиты здоровья и безопасности персонала, надлежащего ввода в эксплуатацию, управления и технического обслуживания ветроэнергетических установок. Настоящий стандарт распространяется на ветроэнергетические установки большой мощности с горизонтальной осью вращения ветроколеса, имеющие в своем составе обслуживаемые гондолы. Для других конструкций ветроэнергетических установок (например, с вертикальной осью вращения или мощностью менее 50 кВт) принципы сохраняются, но конкретные правила или требования должны быть разработаны в соответствии с их конструкцией. Стандарт не распространяется на ветроэнергетические установки, произведенные до даты его официальной публикации
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/6/2013
SKU: RUSS72077
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
27 Power and heat engineering »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.180 Wind turbine systems »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.180 Wind turbine systems »
The Document References:
GOST 23941-2002: Noise of machines. Methods for determination of noise characteristics. General requirements
GOST EN 1070-2003: Safety of machinery. Terms and definitions
GOST EN 1837-2002: Safety of machinery. Integral lighting of machines
GOST EN 953-2002: Safety of machines. Removable protective devices. General requirements to the design and manufacturing of stationary and portable removable protective devices
GOST ISO 11205-2006: Noise emitted by machinery. Determination of emission sound pressure levels at the work station and at other specified positions using sound intensity. Engineering method
GOST R 12.0.010-2009: Occupational safety standards system. Occupational safety and health management systems. Hazard and risks identification and estimation of risks
GOST R 12.2.143-2009: Occupational safety standards systems. Photoluminescent evacuation systems. Requirements and methods of test
GOST R 51336-99: Safety of machinery. Emergency stop equipment. Functional aspects. Principles for design
GOST R 51337-99: Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values for hot surfaces
GOST R 51340-99: Safety of machinery. Basic characteristic of visual and auditory danger signals. Technical requirements and methods for testing
GOST R 51343-99: Safety of machinery. Prevention of unexpected start-up
GOST R 51344-99: Safety of machinery. Principles for risk assessment
GOST R 51953-2002: Starch and starch products. Terms and definitions
GOST R 54124-2010: Safety of machinery and equipment. Risk assessment
GOST R 54418.11-2012: Renewable power engineering. Wind power engineering. Wind turbines. Part 11. Acoustic noise measurement techniques
GOST R 54435-2011: Wind power plant constructions. Base safety requirements
GOST R EN 547-1-2008: Safety of machinery. Human body measurements. Part 1. Principles for determining the dimensions required for openings for whole body access into machinery
GOST R EN 547-3-2009: Safety of machinery. Human body measurement. Part 3. Anthropometric data
GOST R ISO 12100-1-2007: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terminology, methodology
GOST R ISO 12100-2-2007: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles
GOST R ISO 14122-1-2009: Safety of machinery - permanent means of access to machinery. Part 1. Choice of fixed means of access between two levels
GOST R ISO 14122-2-2010: Safety of machinery. Permanent means of access to machinery. Part 2. Working platforms and walkways.
GOST R ISO 14122-3-2009: Safety of machinery. Permanent means of access to machinery. Part 3. Stairs, stepladders and guard-rails.
GOST R ISO 14122-4-2009: Safety of machinery. Permanent means of access to machinery. Part 4. Vertical stairs
GOST R ISO 7731-2007: Ergonomics. Danger signals for public and work areas. Auditory danger signals
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
