GOST R 51017-2009
ГОСТ Р 51017-2009
|
|
Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
Техника пожарная. Огнетушители передвижные. Общие технические требования. Методы испытаний
Status: Effective - Supersedes. IUS 2-2010; Introduced with early application right
The standard applies to mobile fire extinguishers with a total mass of not less than 20 kg and not more than 400 kg (hereinafter - fire extinguishers) designed to extinguish fires of classes A, B, C, E. The standard establishes the basic indicators and test methods of mobile fire extinguishers. The standard does not apply to fire extinguishers for special purposes (for extinguishing forest fires, for extinguishing class D fires, etc.)
Стандарт распространяется на передвижные огнетушители с полной массой не менее 20 кг и не более 400 кг (далее - огнетушители), предназначенные для тушения пожаров классов А, В, С, Е. Стандарт устанавливает основные показатели и методы испытаний передвижных огнетушителей. Стандарт не распространяется на огнетушители специального назначения (для тушения лесных пожаров, для тушения пожаров класса D и др.)
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
2/18/2009
SKU: RUSS72131
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.20 Fire fighting equipment »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.20 Fire fighting equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G8 Machinery and equipment of universal application »
G88 Fire fighting vehicles, equipment and inventory »
As a Replacement Of:
GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 10177-82: Buttress thread for diameters from 10 to 600 mm. Basic dimensions and tolerances
GOST 12.2.037-78: Fire engineering. Safety requirements
GOST 12.4.026-76: Signal colors and safety signs
GOST 13837-79: General purpose dynamometers
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16588-91: Sawn products and wooden details. Methods for determining moisture content
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 2.114-95: Unified system for design documentation. Specifications
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 27331-87: Fire engineering. Cassification of fires
GOST 28198-89: Basic environmental testing. Part 1. General and quidance
GOST 4234-77: Reagents. Potassium chloride. Specifications
GOST 8050-85: Carbon dioxide,
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 8510-86: Hot-rolled steel unequal-leg angles. Dimensions
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests
GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.
GOST 9293-74: Gaseous and liquid nitrogen. Specifications
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
GOST R 51105-97: Gasoline for combustion engines. Unleaded gasoline. Specifications
GOST R 51368-99: Climatic environment stability test methods for machines, instruments and other industrial products. Test for stability influence of temperature
GOST R 51369-99: Climatic environment stability test methods machines, instruments and other industrial products. Test for influence of humidity
GOST R 51370-99: Climatic environment stability test methods for machines, instruments and other industrial products. Test for influence of solar radiation
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 03-583-03: Rules for Development, Production and Application of Membranous Safety Equipment
The Document is Referenced By:
Decision 200: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis ensures compliance with the requirements of the technical regulations of the Eurasian Economic Union "On requirements for means of fire safety and fire fighting" (TR EAEC 043/2017), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and meters
GOST 33546-2015: Automobile vehicles operational-service for the transport of persons in custody. Requirements and test methods
GOST R 53285-2009: Fire engineering. Portable generators of extinguishing aerosol. General technical requirements. Test methods
GOST R 53291-2009: Portable and movable devices of fire extinguishing with high-velosity submission of fire quenching matter. General technical requirements. Test methods
GOST R 56677-2015: Means of physical protection engineering. Coding, identification and marking. General requirements
GOST R 56878-2016: Liquefied natural gas fuelled locomotives. Requirements for operation management
Order 1317: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Order 1573: The list of national standards and sets of rules, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Order 832: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
RD EO 1.1.2.09.0772-2012: Methods of assessing the technical condition and resource characteristics of systems and fire protection ?a nuclear power plants
SP 135.13130.2012: Heliports. Fire safety requirements
SP 162.1330610.2014: Safety requirements for production, storage, transportation and use of liquid hydrogen
SP 9.13130.2009: Fire Engineering. Fire extinguishers. Requirements to Operation
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
