GOST R 53814-2010
ГОСТ Р 53814-2010
|
|
Vehicles for transportation of money takings and valuable loads. Technical requirements and test methods
Автомобили для перевозки денежной выручки и ценных грузов. Технические требования и методы испытаний
Status: Effective - Introduced for the first time
This standard applies to special vehicles of category M "with the index 1", N "with the index 1", N "with the index 2", N "with the index 3" according to GOST 52051, intended for the carriage of cash proceeds and valuable goods and operated on public roads of the Russian Federation
Настоящий стандарт распространяется на специальные транспортные средства категории M "с индексом 1", N "с индексом 1", N "с индексом 2", N "с индексом 3" по ГОСТ 52051, предназначенные для перевозки денежной выручки и ценных грузов и эксплуатируемые на дорогах общего пользования Российской Федерации
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
7/7/2010
SKU: RUSS72140
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
018/2011 TR CU. On safety of wheeled vehicles »
Regulations and standards (to 018/2011 TR CU) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.1 Motor vehicles and equipment »
ISO classifier »
43 ROAD TRANSPORT TECHNOLOGY »
43.160 Special purpose vehicles »
National standards »
43 ROAD TRANSPORT TECHNOLOGY »
43.160 Special purpose vehicles »
National Standards for KGS (State Standards Classification) »
Latest edition »
D Vehicles and packaging »
D2 Cars, tractors and tow trucks »
D20 Classification, nomenclature and general rules »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 25076-81: Nonmetallic materials for interior trim of motor vehicles. Method of flammability determination
GOST 30593-97: Motor vehicles. Heating, ventilation and air conditioning systems. Requirements for effeciency and safety
GOST 7933-89: Cardboard for the retail containers
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 41.21-99: Uniform provisions concerning the approval of vehicles with regard to their interior fittings
GOST R 41.58-2001: Uniform provisions concerning the type approval of: I. Rear underrun protective devices (RUPDs); II. Vehicles with regard to the installation of a RUPD of an approved type; III. Vehicles with regard to their rear underrun protection (RUP)
GOST R 41.65-99: Uniform provisions concerning the approval of special warning lamps for motor vehicles
GOST R 41.73-99: Uniform provisions concerning the approval of goods vehicles, trailers and semi-trailers with regard to their lateral protection
GOST R 50574-2002: Automobiles, buses and motorcycles of emergency services. Colours diagrams, identification symbols, inscriptions, special light and sound signals. General requirements
GOST R 50577-93: Licence plates for vehicles. Types and main sizes. Technical requirements
GOST R 50963-96: Armour protection cars. General technical requirements
GOST R 50993-96: Motor vehicles. Heating, ventilation and air conditioning systems. Requirements for efficiency and safety
GOST R 51136-2008: Protective laminate glass. General specifications
GOST R 51206-2004: Motor vehicles. Content of pollutants in the air of passenger compartment and cabin. Norms and test methods
GOST R 51266-99: Automobile transport facilities. Visibility from the driver's seat. Technical requirements. Test methods
GOST R 51616-2000: Motor vehicles. Internal noise. Permissible levels and methods of tests
GOST R 51980-2002: Vehicles. Marking. General technical requirements
GOST R 52031-2003: Passenger cars. Defrosting and demisting systems for glazed surfaces. Technical requirements. Tests methods
GOST R 52032-2003: Passenger cars. Windscreen wiper and washer systems. Technical requirements. Test methods
GOST R 52051-2003: Power-driven vehicles and trailers. Classification and definitions
GOST R 52302-2004: Road vehicles. Handling and stability. Technical requirements. Test methods
GOST R 52389-2005: Wheeled vehicles. Masses and dimensions. Technical requirements and test methods
GOST R 52422-2005: Trucks and trailers. The spray-suppression systems. Technical requirements and test methods
GOST R 52508-2005: Vehicles for transporting of the cash money and the valuable items. Requirements for colours diagrams, identification symbols and inscriptions
GOST R 52582-2006: Looks for protective designs. Requirements and test methods for resistance to criminal open without lock breakage and to burglary
GOST R 52853-2007: Passenger vehicles. Wheel guards. Technical requirements
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
The Document is Referenced By:
Decision 219: The list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of the technical regulations of the Customs Union "On the safety of wheeled vehicles". (TR CU 018/2011), and a list of international and regional (interstate) standards, and in their absence - national (state) standards containing the rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulations of the Customs Union "On the safety of wheeled vehicles" (TR CU 018/2011) (TR CU 018/2011) and conformity assessment of objects of technical regulation
GOST R 54834-2011: Equipment for bank protection. Mobile cash operation terminals. General technical requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
