GOST 19804.6-83
ГОСТ 19804.6-83
|
|
Reinforced-concrete round hole built-up piles and tubular piles. Structure and dimensions
Сваи полые круглого сечения и сваи-оболочки железобетонные составные с ненапрягаемой арматурой. Конструкция и размеры
Status: Effective
The standard applies to reinforced concrete composite hollow piles of circular cross section with a diameter of 400 to 800 mm, shell piles with a diameter of 1000 to 1600 mm with non-stressed longitudinal reinforcement, with bolted and welded joints and e
Стандарт распространяется на железобетонные составные полые сваи круглого сечения диаметром 400 до 800 мм, сваи-оболочки диаметром от 1000 до 1600 мм с ненапрягаемой продольной арматурой, с болтовыми и сварными стыками и устанавливает конструкцию свай, св
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
2/2/1983
SKU: RUSS72198
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
Welding regulations »
Main materials »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Wire »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh33 Stone, brick, concrete and reinforced concrete structures and parts »
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 10268-80: Heavy concrete. Technical requirements for fillers
GOST 10884-81: Heat strengthened steel bars of periodical section for concrete reinforcement. Technical requirements
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 11371-78: Washers. Specifications
GOST 14098-68: Welded reinforcement joints of reinforced concrete products and structures. Contact and bath welding. Main types and structural elements
GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 19804.0-78: Piles driven of reinforced concrete. General specifications
GOST 19804-91: Reinforced concrete piles. Specifications
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions
GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications
GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
The Document is Referenced By:
GOST 19804-2012: Reinforced prefabricated concrete piles. Specifications
GOST 19804-91: Reinforced concrete piles. Specifications
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SP 24.13330.2011: Pile foundations
SP 50-102-2003: Design and construction of soil bases and foundations for buildings and structures
TSN 50-304-2000: Foundation Beds, Foundations, and Underground Structures
TSN 50-304-2001: Basements, foundations, and underground constructions
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
