GOST 30732-2001
ГОСТ 30732-2001
|
|
Steel shaped pipes and products with foamed polyurethane thermal insulation in polyethylene jacket. Technical specifications
Трубы и фасонные изделия стальные с тепловой изоляцией из пенополиуретана в полиэтиленовой оболочке. Технические условия
Status: Not effective - Superseded
This standard applies to steel pipes and fittings with thermal insulation of polyurethane foam in a polyethylene sheath, designed for underground channelless laying of heat networks with design parameters of the coolant: operating pressure up to 1.6 MPa and temperatures up to 130 degrees C (allowed short-term increase in temperature to 150 degrees. C)
Настоящий стандарт распространяется на стальные трубы и фасонные изделия с тепловой изоляцией из пенополиуретана в полиэтиленовой оболочке, предназначенные для подземной бесканальной прокладки тепловых сетей с расчетными параметрами теплоносителя: рабочим давлением до 1,6 МПа и температурой до 130 град. С (допускается кратковременное повышение температуры до 150 град. С)
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
3/12/2001
SKU: RUSS72207
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
k.41 Heat supply, heating, ventilation and air conditioning »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.60 Heat and sound insulating materials »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.60 Heat and sound insulating materials »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh2 Sanitary, engineering and fire fighting equipment for buildings »
Zh24 Heating, ventilation and air conditioning »
The Document is Replaced With:
GOST 30732-2006: Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.
The Document References:
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 11262-80: Plastics. Tensile strength test method.
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements
GOST 12.3.038-85: Occupational safety standards system. Construction. Works on thermal instulation of equipment and pipe lines. Safety requirements
GOST 166-89: Vernier callipers. Specifications
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17177-94: Thermal insulating materials and products for building application. Test methods.
GOST 17375-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Sharply curved offsets. Design
GOST 17376-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Tees. Design and dimensions
GOST 17378-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Reducers. Design and dimensions
GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 18599-83: Polyethylene pressure pipes
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 30256-94: Building materials and products. The method of the thermal conductivity determination by a cylindrical probe
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7076-87: Building materials and products. Method of thermal conductivity determination
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping
SanPiN 3183-84: The order of accumulation, transportation, neutralization and disposal of toxic industrial waste №3183-84. (Appendix No. 2, see "Limit content of toxic compounds in industrial wastes, determining the classification of these wastes as toxicity materials" N
SNiP 2.04.07-86: Heating networks
SNiP 2.04.14-88: Heat insulation of equipment and pipelines
SNiP 23-01-99: Building climatology
SNiP 3.05.03-85: Heat networks
SNiP III-4-80: Safety requirements
The Document is Referenced By:
GOST 30732-2006: Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.
MDK 2-04.2004: Methodological manual for the maintenance and repair of housing
RD 3-VEP: Guidance document on the use of axial bellows expansion joints (SC) for the technical conditions of the İNESH.300260.029TU, bellows compensating devices (SKU) for the technical conditions of the ЯІANSh.300260.033TU, starting bellows for the compensators (
SNiP 41-02-2003: Heat networks
SNiP 41-03-2003: Designing of thermal insulation of equipment and pipelines
SP 41-105-2002: Design and construction of underground thermal networks made of steel pipes with industrial thermal insulation made of polyurethane foam in polyethylene sheath
SP 41-106-2004: Design and erection of underground hot water supply and heat supply pipelines made of asbestos cement pipes
SP 41-106-2006: Design and installation of underground pipeline systems for hot water supply and heating made of pressurized of asbestos-cement pipes and couplings. To replace SP 41-106-2004
TR 129-02: Technical recommendations for the construction of heat and water supply networks of steel pipes with polyurethane foam insulation in underground channel and ground gaskets
TR 165-05: Technical recommendations on the establishment of durability (service life) of building materials and products
TSN 30-309-2003: Planning and development of urban areas of the Republic of Bashkortostan under reconstruction
TSN 41-306-2003: Thermal Insulation of Pipelines for Various Purposes. City of Moscow
TSN 41-307-2003: Design and Construction of Piped Heat Distribution Networks with Individual Foam Polyurethane Thermal Insulation. City of Moscow
TU 1390-007-32256008-05: External heat-insulating coating of pipes and fittings with a diameter of 57 ... 720 mm
TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines
TU 5768-019-01297858-01: Polyurethane Insulation Shells
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
