imgalt

GOST R 50838-95

ГОСТ Р 50838-95

Polyethylene pipes for the supply of gaseous fuel. Specifications

Трубы из полиэтилена для газопроводов. Технические условия

Status: Not effective - Superseded

This standard applies to polyethylene pressure pipes for underground gas pipelines transporting combustible gases intended as raw materials and fuels for industrial and domestic use.

Настоящий стандарт распространяется на напорные трубы из полиэтилена для подземных газопроводов, транспортирующих горючие газы, предназначенные в качестве сырья и топлива для промышленного и коммунально-бытового использования

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Committee of the Russian Federation for Standardization, Metrology and Certification, 11/17/1995

SKU: RUSS72216

Price: $715.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Construction (Max) » Standards » Other state standards used in construction » 83 Rubber, technical rubber, asbestos and plastic industries »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.01 Pipelines and their components in general »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.01 Pipelines and their components in general »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.20 Plastic pipes »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.20 Plastic pipes »

ISO classifier » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.140 Rubber and plastic products » 83.140.30 Plastic pipes, fittings not for liquids »

National standards » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.140 Rubber and plastic products » 83.140.30 Plastic pipes, fittings not for liquids »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L2 Organic Chemical Products » L26 Plastic products »


The Document is Replaced With:

GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications

The Document References:

GOST 11262-80: Plastics. Tensile strength test method.

GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications

GOST 11645-73: Plastics method of determination of melt flow index for thermoplastics

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing

GOST 12.4.121-83: Industrial filtering gas-masks

GOST 12162-77: Solid carbon dioxide

GOST 12423-66: Plastics. Standard atmospheres for conditioning and testing specimens

GOST 13045-81: Rota meters

GOST 14192-96: Cargo marking

GOST 15139-69: Plastics. Methods for the determination of density (mass density)

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16338-85: Low-pressure polyethylene. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises

GOST 19433-88: Dangerous goods. Classification and marking

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 22235-76: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations

GOST 24157-80: Plastic pipes. Method of determination of the resistance to constant internal pressure

GOST 26277-84: Plastics. Preparation of test specimens by machining

GOST 26311-84: Polyolefins. Method of determination of black content

GOST 26359-84: Polyethylene. Method for determination of volatile matters content

GOST 27078-86: Thermoplastic pipes. Methods of determination of the tubes length after heating

GOST 28084-89: Low-freezing cooling liquids. General specifications.

GOST 29325-92: Plastics pipes. Measurement of dimensions

GOST 5583-78: Industrial and medical gaseous oxygen

GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications

GOST 6507-90: Micrometers. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 8032-84: Preferred numbers and series of preferred numbers

GOST 9.708-83: Unified system of corrosion and ageing protection. Plastics. Ageing test methods on exposure to natural and artificial climatic factors

GOST 9293-74: Gaseous and liquid nitrogen. Specifications

GOST 949-73: Small and medium volume steel cylinders for gases for pp ≤ 19.6 MPa (200 kgf/cm2) Specifications

The Document is Referenced By:

GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications

GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications

OSN-APK 2.10.06.001-04: Instructions for the installation of plastic pipelines at the objects of the agroindustrial complex of Russia

OST 153-39.3-051-2003: Gas-distribution system technical maintenance. Main regulations. Gas-distribution network and gas equipment. Tank and balloon plants

SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines

SP 42-105-99: Quality control of welded joints of polyethylene gas pipelines

TU 2248-048-00203536-98: Polyethylene pipes for high pressure gas pipelines (up to 1, 2 MPa). Technical conditions

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!