GOST R 54908-2012
ГОСТ Р 54908-2012
|
|
Heat-resistant steel metal products. Specifications
Металлопродукция из жаростойкой стали. Технические условия
Status: Effective - Introduced for the first time. IUS 1-2013
This standard applies to hot-rolled and cold-formed metal products from heat-resistant steel, intended for the production of products that are resistant to hot gases or combustion products at temperatures above 550 (deg.) C. This standard applies to: - flat products; - rods; - profiles; - wire and rod; - forgings. In addition to the requirements of this standard, the general technical delivery conditions for (4) apply.
Настоящий стандарт распространяется на горячедеформированную и холоднодеформированную металлопродукцию из жаростойкой стали, предназначенную для производства изделий, стойких к воздействию горячих газов или продуктов сгорания при значениях температуры выше 550 (град.)С. Настоящий стандарт распространяется на: - плоский прокат; - прутки; - профили; - проволоку и катанку; - поковки. В дополнение к требованиям настоящего стандарта применяют общие технические условия поставки по (4)
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
6/1/2012
SKU: RUSS72305
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.20 Stainless steels »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.20 Stainless steels »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V32 Rolled and shaped steel »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V33 Sheets and Stripes »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V7 Wire and Wire Products »
V73 Alloy Steel Wire »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V0 General rules and regulations on metallurgy »
V03 Metal forming. Forgings »
The Document References:
Federal Law 184-FZ: About technical regulation
GN 2.6.1.2159-07: Content of technogenic radionuclides in metals
GOST 103-2006: Hot-rolled steel strips. Dimensions
GOST 1133-71: Forged round and square steel. Dimensions
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium
GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium
GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium
GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium
GOST 14955-77: Quality round steel with a special surface finish
GOST 17745-90: Steels and alloys. Methods for determination of gases
GOST 18143-72: Corrosion resistant
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 2590-2006: Round hot-rolled steel bars. Dimensions
GOST 2591-2006: Square hot-rolled steel bars. Dimensions
GOST 28033-89: Steel. Method of X-ray-fluorescent analysis
GOST 4405-75: Hot-rolled and wrought tool steel strips. Dimensions
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7566-94: Metal products
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication
GOST R 53845-2010: Steel rolled products. General rules of sampling, rough specimens and test pieces selection for mechanical and technological testing
GOST R 54909-2012: Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications
The Document is Referenced By:
GOST R ISO 20202-2016: Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.