GOST 30777-2012
ГОСТ 30777-2012
|
|
Turned, reclined, turned-reclined and sliding devices for windows and balcony doors. Specifications
Устройства поворотные, откидные, поворотно-откидные, разджвижные для оконных и балконных дверных блоков. Технические условия
Status: Effective - Supersedes. IUS 12-2014
This standard applies to rotary, folding, swing-out, sliding, parallel-sliding, sliding devices (hereinafter - devices) for window and balcony door blocks used in residential and public buildings. The devices can be used in different climatic zones in accordance with the standards of building climatology. This standard can be applied for certification of products. This standard does not apply to products installed on window and balcony door blocks for special purposes (burglar-resistant, fire-fighting, etc.). Requirements for burglar-resistant products are given in GOST 31462
Настоящий стандарт распространяется на поворотные, откидные, поворотно-откидные, раздвижные, параллельно-выдвижные, сдвижные устройства (далее - устройства) для оконных и балконных дверных блоков, применяемых в жилых и общественных зданиях. Устройства могут применяться в различных климатических зонах в соответствии с нормами строительной климатологии. Настоящий стандарт может быть применен для сертификации изделий. Настоящий стандарт не распространяется на изделия, устанавливаемые на оконные и балконные дверные блоки специального назначения (взломоустойчивые, противопожарные и др.). Требования к взломоустойчивым изделиям приведены в ГОСТ 31462
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/27/2012
SKU: RUSS72357
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.56 Windows, doors, gates and their appliances »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.50 Doors and windows »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.50 Doors and windows »
The Document is Replaced With:
GOST 30777-2023: Opening devices for window and balcony units (hardware). General technical conditions
As a Replacement Of:
GOST 30777-2001: Turned, reclined and turned-reclined devices for windows and balcony doors. Specifications
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1583-93: Aluminium casting alloys. Specifications
GOST 16338-85: Low-pressure polyethylene. Specifications
GOST 17711-93: Cast copper-zink alloys (brass). Grades
GOST 19424-74: Cast zinc alloys in pigs. Specifications
GOST 19459-87: Injection moulding polyamide copolymers. Specifications
GOST 23166-99: Windows. General specifications
GOST 25140-93: Zinc alloys for casting. Grades
GOST 26602.2-99: Windows and doors. Methods of determination of air and water transmission
GOST 31462-2011: Safety windows. General specifications
GOST 5088-2005: Hinges for windows and doors. Specifications
GOST 538-2001: Locks and building hardware. General specifications
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
The Document is Referenced By:
GOST 21519-2022: Window blocks made of aluminum profiles. Technical conditions
GOST 23747-2015: Door blocks of aluminium profiles. Specifications
GOST 24033-2018: Windows, doors and gates. Mechanical test methods
GOST 30970-2014: Door blocks of polyvinylchloride profiles. Specifications
GOST 31173-2016: Steel doors. Specifications
GOST 34378-2018: Translucent enclosing structures. Windows and doors. Installation work execution, check and demands for results of works
GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions
GOST 34914-2022: Windows for industrial buildings. General technical conditions
GOST 475-2016: Door Blocks wooden and combined. General specifications
GOST 538-2014: Locks and building hardware. General specifications
GOST R 56926-2016: Window and balcony constructions of different functional purpose for residential buildings. General specifications
GOST R 57788-2017: Protective blocks for windows and doors in protected premises. General specifications
GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions
GOST R 70448-2022: Translucent enclosing structures in low-rise residential buildings. Rules and control of installation works
R 78.36.033-2013: Application monitoring and comparative analysis of testing various types of window units, blinds, security grilles and glazing. Classification, methods of installation and strengthening of the structure. Guidelines
RMD 56-05-2015 Saint-Petersburg: Recommendations for the design, manufacture and installation of translucent structures with safety glazing (2016 edition)
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.