GOST R 53010-2008
ГОСТ Р 53010-2008
|
|
Hydraulic presses. Safety requirements
Прессы гидравлические. Требования безопасности
Status: Not effective - Canceled. Registration information 1005-st dated November 22, 2012 (the official website of FSUE Standartinform)
The standard establishes the requirements and safety measures to be taken in the design, manufacture and supply of hydraulic presses, their units and components; applies to all designed, manufactured and upgraded hydraulic presses, lines and equipment complexes based on them, automation and mechanization tools for them. The standard also covers presses that were originally designed to work with cold metal, but are used in the same way to work with other sheet materials (such as cardboard, plastic, rubber or leather) and metal powder. The standard does not apply to equipment whose main designation is: - cutting sheet metal with guillotine shears; - installation of fasteners, such as staves, staples or stitches; - bending or rolling; - punch turret punching; - stamping on the hammer; - punching on specialized punching presses using templates (for example, for the construction industry). The standard is used in conjunction with GOST 12.2.003, GOST 12.2.017. The standard applies to presses manufactured after the date of its introduction.
Стандарт устанавливает требования и меры безопасности, которые должны приниматься при проектировании, производстве и поставках гидравлических прессов, их агрегатов и узлов; распространяется на все проектируемые, изготовляемые и модернизируемые гидравлические прессы, линии и комплексы оборудования на их базе, средства автоматизации и механизации к ним. Стандарт также охватывает прессы, которые изначально предназначались для работы с холодным металлом, но используются аналогичным образом для работы с другими листовыми материалами (например, картоном, пластмассой, резиной или кожей) и металлическим порошком. Стандарт не распространяется на оборудование, основным проектным назначением которого является: - резка листового металла гильотинными ножницами; - установка креплений, например клепок, скоб или стежков; - гибка или вальцовка; - револьверная дыропробивная штамповка; - штамповка на молоте; - пробивка на специализированных дыропробивных прессах по шаблонам (например, для строительной промышленности). Стандарт применяют совместно с ГОСТ 12.2.003, ГОСТ 12.2.017. Стандарт применяется к прессам, изготовленным после даты его введения.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/25/2008
SKU: RUSS72374
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Construction (Max) »
Standards »
Other state standards used in construction »
25 Mechanical Engineering »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.120 Chipless processing equipment »
25.120.10 Forging equipment. The press. Scissors »
National standards »
25 MECHANICAL ENGINEERING »
25.120 Chipless processing equipment »
25.120.10 Forging equipment. The press. Scissors »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G0 General rules and regulations for engineering »
G07 Safety »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.017-93: The forging and pressing equipment general safety requirements
GOST 28690-90: Mark of conformity of technical means electromagnetic compatibility requirements. Form, sizes and technical requirements
GOST 30869-2003: Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics
GOST 31169-2003: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ
GOST 31177-2003: Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics
GOST EN 1005-2-2005: Safety of machinery. Human physical performance. Part 2. Manual handling of machinery and component parts of machinery
GOST ISO 13851-2006: Safety of machinery. Two-hand control devices. Functional aspects and design principles
GOST ISO 13855-2006: Safety of machinery. Positioning of protective equipment with respect to the approach speeds of parts of the human body
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication
GOST R 51334-99: Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs
GOST R 51335-99: Safety of machinery. Minimum gaps to avoid crushing of parts of the human body
GOST R 51336-99: Safety of machinery. Emergency stop equipment. Functional aspects. Principles for design
GOST R 51337-99: Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values for hot surfaces
GOST R 51338-99: Safety of machinery. Reduction of risk to health from hazardous substances emitted by machinery. Part 1. Principles and specifications for machinery manufacturers
GOST R 51340-99: Safety of machinery. Basic characteristic of visual and auditory danger signals. Technical requirements and methods for testing
GOST R 51341-99: Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Part 2. Displays
GOST R 51342-99: Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
GOST R 51343-99: Safety of machinery. Prevention of unexpected start-up
GOST R 51344-99: Safety of machinery. Principles for risk assessment
GOST R 51345-99: Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
GOST R EN 614-1-2003: Safety of machinery. Ergonomic design principles. Part 1. Terms, definitions and general principles
GOST R IEC 60204-1-2007: Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements
GOST R ISO 12100-1-2007: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terminology, methodology
GOST R ISO 12100-2-2007: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles
GOST R ISO 13849-1-2003: Safety of machinery. Safety-related parts of control systems. Part 1. General principles for design
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
