GOST 32598-2013
ГОСТ 32598-2013
|
|
Tubes copper round for water and gas. Specifications
Трубы медные круглого сечения для воды и газа. Технические условия
Status: Effective - Introduced for the first time. IUS 3-2015
This standard applies to seamless copper drawn pipes with an outer diameter of 6 to 267 mm, used in hot and cold water supply systems, water (steam) heating, including floor and ceiling heating, cooling, sewage, sewage treatment plants and gas supply, as well as pipes designed to pre-insulate pipes for any of the specified applications. Pipes according to this standard can be used for transportation of other media or in other areas of application, with the coordination of special requirements for use, delivery and storage between the manufacturer and the customer.
Настоящий стандарт распространяется на бесшовные медные тянутые трубы с наружным диаметром от 6 до 267 мм, используемые в системах холодного и горячего водоснабжения, водяного (парового) отопления, включая напольное и потолочное отопление, охлаждения, канализации, очистных сооружениях и газоснабжения, а также применим для труб, предназначенных для предварительной изоляции труб для любой из указанной областей применения. Трубы по настоящему стандарту могут быть использованы для транспортировки других сред или в других областях применения, при согласовании специальных требований по применению, поставке и хранению между производителем и заказчиком
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/30/2013
SKU: RUSS72405
The Product is Contained in the Following Classifiers:
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Soldering »
Welding regulations »
Main materials »
Non-ferrous metals »
Welding regulations »
Welding materials »
Wire »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.5 Non-ferrous metal products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.15 Non-ferrous metal pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.15 Pipes from non-ferrous metals »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V6 Pipes metal and pipe products »
V64 Pipes from non-ferrous metals and alloys »
The Document References:
GOST 10006-80: Metal pipes
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10354-82: Polyethylene film Specifications
GOST 12082-82: Roof boarding for consignments up to 500 kg. General specifications
GOST 13938.10-78: Copper. Methods for the determination of antimony
GOST 13938.11-78: Copper. Method for the determination of arsenic
GOST 13938.12-78: Copper. Methods for the determination of bismuth
GOST 13938.13-93: Copper. Methods of determination of oxygen
GOST 13938.15-88: Copper. Methods for determination of chromium and cadmium
GOST 13938.1-78: Copper. Methods for determination of copper
GOST 13938.2-78: Copper. Methods for determination of sulphur
GOST 13938.3-78: Copper. Method for determination of phosphorus
GOST 13938.4-78: Copper. Methods for determination of iron
GOST 13938.5-78: Copper. Methods for determination of zinc
GOST 13938.6-78: Copper. Methods for the determination of nickel
GOST 13938.7-78: Copper. Methods for the determination of lead
GOST 13938.8-78: Copper. Methods for the determination of tin
GOST 13938.9-78: Copper. Methods for determination of silver
GOST 14192-96: Cargo marking
GOST 15102-75: Universal metallic closed container of nominal gross mass 5,0 tn. Specifications
GOST 15467-79: Product quality control. Basic concepts. Terms and definitions
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 22225-76: Containers multipurpose gross weight 0,625 and 1,25 t. Specifications
GOST 24047-80: Half-finished products out of non-ferrous metals and their alloys. Sampling for tensile test
GOST 24231-80: Non-ferrous metals and alloys. General requirements for sampling and sample preparation for chemical analysis
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements
GOST 26877-91: Metal products
GOST 2768-84: Acetone technical. Specifications
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 3560-73: Sealing tepe
GOST 3728-78: Tubes. Method of bend-over test
GOST 3845-75: Metallic tubes. Hydraulic pressure testing method
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 7376-89: Corrugated paperboard
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8273-75: Packing paper
GOST 859-2001: Copper. Grades
GOST 8693-80: Metal pipes. Method of flange testing
GOST 8694-75: Tubing (pipes). Expansion testing method
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9557-87: Flat wooden pallets with dimensions 800ґ1200 mm
GOST 9569-2006: Paraffined paper. Specifications
GOST 9717.1-82: Copper. Method of spectral analysis of metal standard specimens with photoelectrical registration of spectrum
GOST 9717.2-82: Copper. Method of spectral analysis of metal standard specimens with photographic registration of spectrum
GOST 9717.3-82: Copper. Method of spectral analysis of oxide standard specimens
GOST R 52901-2007: Corrugated board for products packaging. General specifications
The Document is Referenced By:
GOST 32447-2013: Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases
GOST 32591-2013: Fittings of copper and copper alloys with compression ends for use with copper tubes. Specifications
GOST R 58095.2-2018: Gas distribution systems. Requirements for gas consumption networks. Part 2. Copper gas pipelines
SP 402.1325800.2018: Residential buildings. Rules for the design of gas consumption systems
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.