GOST 30331.2-95
ГОСТ 30331.2-95
|
|
Electrical installations of buildings. Part 3. General characteristics
Электроустановки зданий. Часть 3. Основные характеристики
Status: Not effective - Canceled in the Russian Federation. IUS 11-2009
The standard establishes the main characteristics of electrical installations of buildings, which are necessary to ensure safety in the operation of electrical installations.
Стандарт устанавливает основные характеристики электроустановок зданий, которые необходимы для обеспечения безопасности при эксплуатации электроустановок
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
11/10/1994
SKU: RUSS72430
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
91 Building materials and construction »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.10 Operation of electrical installations, electrical equipment and power tools »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.50 Power supply systems »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.50 Power supply systems »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E0 General rules and regulations for electrical and heat engineering »
E02 Norms of calculation and design »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
General rules and regulations »
The Document References:
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15160-69: Technical cotton fabrics and products tropics. Specifications
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability
GOST 17516-72: Electrical articles. Operating conditions as to environment mechanical aspects influence
GOST 24682-81: Electrotechnical products
GOST 28711-90: Tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements
GOST 30331.1-95: Electrical installations of buildings. General
The Document is Referenced By:
GOST 12.2.091-2002: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST 12.2.091-2012: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST 28668-90: Low-voltage switchgear and control gear assemblies. Part 1. Requirements for type-tested and partially type-tested assemblies
GOST 30326-95: Safety of information technology equipment included electrical business equipment
GOST 30852.13-2002: Explosionproof electrical apparatus.. Part 14. Electrical installations in explosive gas atmospheres (other than mines)
GOST 30852.16-2002: Explosion-prooof electrical apparatus. Part 17. Inspection and maintenance of electrical installations in hazardous areas (other than mines)
GOST 30852.8-2002: Explosionproof electrical apparatus. Part 7. Type of protection e
GOST 32395-2013: Distribution boards for dwelling-houses. General specifications
GOST 32396-2013: Input-distributional boards for dwellings and public buildings. General specifications
GOST 32397-2013: Distribution boards for industrial and social buildings. General specifications
GOST ISO 8528-8-2011: Reciprocating internal combustion engine driven alternating current generating sets. Part 8. Requirements and tests for low-power generating sets
GOST MEK 60204-1-2002: Safety of machines. Electrical equipment for machined and devices. Part 1. General requirements
GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods
GOST R 50339.0-2003: Low-voltage fuses. Part 1. General requirements
GOST R 50571.10-96: Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Chapter 54. Earthing arrangements and protective conductors
GOST R 50571.1-2009: Low-voltage electrical installations. Part 1. Fundamental principles, assessment of general characteristics and definitions
GOST R 50571.14-96: Electrical installations of buildings. Part 7. Requirements for special installations or locations. Section 705. Electrical installations of agricultural and stock-breeding buildings
GOST R 50571.15-97: Electrical installations of buildings
GOST R 50571.16-2007: Low-voltage electrical installations. Part 6. Tests
GOST R 50571.16-99: Electrical installations of buildings. Part 6. Verification. Chapter 61. Initial verification
GOST R 50571.17-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 48. Choice of protective measures as a function of external influences. Section 482. Protection against fire
GOST R 50571.18-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 442. Protection of low-voltage installations against faults between high-voltage systems and earth
GOST R 50571.20-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 444. Protection against electromagnetic interferences (EMI) in installations of buildings
GOST R 50571.21-2000: Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Section 548. Earthing arrangements and equipotential bolding for information technology installations
GOST R 50571.22-2000: Electrical installations of buildings. Part 7. Requirements for special installations or locations. Section 707. Earthling requirements for the installation of data processing equipment
GOST R 50571.23-2000: Electrical installations of buildings. Part 7. Requirements for special installations or locations. Section 704. Construction and demolition site installations
GOST R 50571.24-2000: Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Chapter 51. Common rules
GOST R 50571.25-2001: Electrical installations of buildings. Part 7. Requirements for special installations. Electrical installations of buildings and structures with electrical heating of floors and surfaces
GOST R 50571.26-2002: Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Section 534. Devices for protection against surge overvoltages
GOST R 50571.27-2003: Electrical installations of buildings. Part 7-740. Requirements for special installations or locations. Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses
GOST R 51321.1-2000: Low-voltage switchgear and controlgear assemblies. Part 1. Requirements for type-tested and partially type-tested assemblies. General technical requirements and methods of tests
GOST R 51321.1-2007: Low-voltage switchgear and control gear assemblies. Part 1. Type-tested and partially type-tested assemblies. General technical requirements and test methods
GOST R 51330.13-99: Explosion protected electrical apparatus. Part 14. Electrical installations in explosive gas environments (other than mines)
GOST R 51330.16-99: Explosion protected electrical apparatus. Part 17. Inspection and maintenance of electrical installations in hazardous areas (other than mines)
GOST R 51330.8-99: Explosionproof electrical apparatus. Part 7. Type e protection.
GOST R 51350-99: Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements
GOST R 51628-2000: Distribution boards for dwelling-houses. General specifications
GOST R 51732-2001: Input-distributional boards for dwellings and public buildings. General specifications
GOST R 51778-2001: Distribution boards for industrial and social buildings. General specifications
GOST R 51838-2001: Safety of machinery. Electrical equipment for industrial machines. Test methods
GOST R 51991-2002: Non-traditional power engineering. Wind power engineering. Wind turbines. General technical requirements
GOST R 52319-2005: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST R 54433-2011: Renovable power engineering. Wind power plants. Maintenance safety requirements
GOST R IEC 60204-1-99: Safety of machinery. Electrical equipment of machines. Part 1. General requirements
GOST R IEC 60269-1-2010: Low-voltage fuses. Part 1. General requirements
GOST R IEC 60598-1-2003: Luminaires. Part 1. General requirements and test methods
GOST R IEC 60950-1-2005: Information technology equipment. Safety. Part 1. General requirements
GOST R IEC 60950-2002: Safety of information technology equipment
GOST R IEC 60950-22-2009: Information technology equipment. Safety. Part 22. Equipment to be installed outdoors
GOST R ISO 8528-8-2005: Reciprocating internal combustion engine driven alternating current generating sets. Part 8. Requirements and tests for low-power generating sets
KPO 02.04.11-2006: Catalog-list of equipment. Complete control, distribution of electrical energy and protection devices for voltage up to 1000 V
Manual: Manual for impulse and low consumption fire extinguishing systems
MEK 364-5-54: Electrical installations of buildings. Part 5. Selection and installation of electrical equipment. Chapter 54. Grounding Devices and Protective Conductors
OST 45.183-2001: stationary Installations of Electrical power of electrical connection apparatus. General technical requirements.
OTT 1.3.3.99.0141-2012: Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
RD 45.155-2000: Grounding and potential equalization of FOCL equipment at wired communication facilities
RMG 45-2003: Presentation of requirements as to environment factors when using IEC and ISO standards in normative standardization documents. General
STB GOST R 51326.1-2003: Automatic circuit breakers, controlled by differential current of household and similar purpose without integral overcurrent protection. Part 1. General requirements and test methods
STB IEC 60950-1-2003: Information technologies equipment. Safety. Part 1. General requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
