GOST R 51017-97
ГОСТ Р 51017-97
|
|
Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
Техника пожарная. Огнетушители передвижные. Общие технические требования. Методы испытаний
Status: Not effective - Superseded. IUS 2-2010
This standard applies to mobile fire extinguishers with a total mass of not more than 400 kg, intended for extinguishing fires of classes A, B, C, and establishes general technical requirements and test methods. The standard does not apply to fire extinguishers of special (targeted) purpose.
Настоящий стандарт распространяется на передвижные огнетушители, имеющие полную массу не более 400 кг, предназначенные для тушения пожаров классов А, В, С, и устанавливает общие технические требования и методы испытаний. Стандарт не распространяется на огнетушители специального (целевого) назначения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
1/28/1997
SKU: RUSS72443
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G8 Machinery and equipment of universal application »
G88 Fire fighting vehicles, equipment and inventory »
National Standards for OKSTU »
CONSTRUCTION, ROAD AND UTILITY ENGINEERING PRODUCTS »
Fire fighting equipment »
The Document is Replaced With:
GOST R 51017-2009: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
The Document References:
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 12.1.033-81: Occupational safety standards system. Fire safety. Terms and definitions.
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.037-78: Fire engineering. Safety requirements
GOST 12.2.047-86: Occupational safety standards system. Fire engineering. Terms and definitions
GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements
GOST 12.2.085-82: Vessels working under pressure. Safety valves. Safety requirements
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.026-76: Signal colors and safety signs
GOST 13837-79: General purpose dynamometers
GOST 14192-77: Marking of cargoes
GOST 14192-96: Cargo marking
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15899-93: 1,1,2,2,-tetrafluorodibromethane (khladon 114B2). Specifications
GOST 16588-91: Sawn products and wooden details. Methods for determining moisture content
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 19729-74: Ground talc for manufacture of rubber products and plastics. Specifications
GOST 2084-77: Mobile gasoline Specifications
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23852-79: Coatings of lacquers and paints. General requirements for choice by decorative properties
GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 24297-87: Input inspection of products. General provisions.
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 26952-86: Fire-extinguishing powders
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 27331-87: Fire engineering. Cassification of fires
GOST 28205-89: Basic environmental testing procedures. Part 2. Tests. Guidance for solar radiation testing
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 7502-89: Measuring metal tapes. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8050-85: Carbon dioxide,
GOST 8273-75: Packing paper
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests
GOST 9.311-87: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Method of corrosion damage evaluation
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.402-80: Metal surface preparation for painting
GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect
GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.
GOST 9.408-86: Unified system of corrosion and ageing protection. Paint coatings. Accelerated corrosion test for resistance in storage conditions
GOST 9.409-88: Unified system of corrosion and ageing protection. Paint coatings. Methods of accelerated tests for the resistance to the effect of petroleum products
GOST 9293-74: Gaseous and liquid nitrogen. Specifications
GOST 949-73: Small and medium volume steel cylinders for gases for pp ≤ 19.6 MPa (200 kgf/cm2) Specifications
GOST 9909-81: Basic norms of interchangeability. Taper screw thread of valves and gas cylinder
GOST R 50588-93: Foaming agents for fire extinguishing. General technical requirements and test methods
GOST R 50599-93: Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating
The Document is Referenced By:
GOST R 51017-2009: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
NPB 155-2002: Fire engineering. Fire extinguishers. The order of statement of fire extinguishers on production and realizations of certified tests
NPB 166-97: Fire engineering. Fire extinguishers. Requirements of exploitation
NPB 316-2003: Portable and movable devices of fire extinguishing with high-velocity submission of fire quenching matter. Requirements of fire safety. Test methods
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.