imgalt

GOST R 53478-2009

ГОСТ Р 53478-2009

Food processing machinery. Dough mixers. Specifications

Машины и оборудование для пищевой промышленности. Машины тестомесильные. Технические условия

Status: Not effective - Canceled. Information about registration 952-st dated November 20, 2012; IUS 10-2013

This standard establishes requirements for the design, installation, transportation, operation, safety and hygiene in the design and manufacture of dough mixing machines with a rotary bowl capacity of up to 0.6 cubic meters (hereinafter - machines). This standard applies to machines with removable (movable) and non-removable bowl designed for kneading dough and dough in the production of bakery and confectionery products. Machines are used for processing various ingredients, including flour, sugar, fat, salt, water and other components, in the industrial production of bakery and confectionery products. Risks associated with the use of these machines in other industries are not considered in this standard. This standard does not apply to the following machines: - planetary mixers; - machines with continuous supply of ingredients; - mixers with stationary vertical bowl; - Experienced and tested machines in the development process; - household appliances; - devices with automatic loading and unloading. This standard is used in conjunction with GOST R 50620

Настоящий стандарт устанавливает требования к конструкции, монтажу, транспортированию, эксплуатации, безопасности и гигиене при конструировании и производстве тестомесильных машин с вместимостью вращающейся дежой до 0,6 м куб (далее - машины). Настоящий стандарт распространяется на машины со съемными (подкатными) и несъемными дежами, предназначенные для замеса опары и теста при производстве хлебобулочных и кондитерских изделий. Машины используют для обработки различных ингредиентов, в том числе муки, сахара, жира, соли, воды и других компонентов, при промышленном производстве хлебобулочных и кондитерских изделий. Риски, связанные с использованием этих машин в других отраслях промышленности, в настоящем стандарте не рассматриваются. Настоящий стандарт не распространяется на следующие машины: - планетарные смесители; - машины с непрерывной подачей ингредиентов; - смесители со стационарной вертикальной дежей; - опытные и испытуемые машины в процессе разработки; - бытовую технику; - устройства с автоматической загрузкой и разгрузкой. Настоящий стандарт применяют совместно с ГОСТ Р 50620

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/9/2009

SKU: RUSS72452

Price: $754.38



imgalt

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.5 Machines and equipment for food industry »

ISO classifier » 67 PRODUCTION OF FOOD » 67.260 Installations and equipment for food industry »

National standards » 67 PRODUCTION OF FOOD » 67.260 Installations and equipment for food industry »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G7 Machines and equipment for food industry and trade » G73 Machines and equipment for milling, groats, animal feed, bakery, pasta, yeast industry and elevator farming »


The Document References:

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements

GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.1.050-86: Occupational safety standards system. Methods of noise measurement at work-places

GOST 12.2.124-90: The food industry equipment

GOST 12969-67: Plates for machines and devices. Technical requirements

GOST 12971-67: Rectangular plates for machines and devices. Dimensions

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas

GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises

GOST 18335-83: Enamel НЦ-184. Specifications

GOST 21130-75: Electrical articles. Grounding terminals and grounding signs

GOST 21786-76: Man-machine system. Sound signalling devices for non-voice communication. General ergonomic requirements

GOST 21829-76: Man-machine system. Coding of visual information. General ergonomic requirements

GOST 22613-77: Man-machine system. Rotary switches and commutators. General ergonomic requirements

GOST 22614-77: «Man-machine» system. Key-actuated and push-button switches and commutators. General ergonomic requirements

GOST 22615-77: «Man-machine» system. Fumbler switches and commutators. General ergonomic requirements

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 23706-93: Direct action analog electrical

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 26582-85: Food (manufacturing) industry machines and equipment

GOST 26987-86: White bread from wheat flour of the premium, first and second grades.

GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 27962-88: Industrial equipment

GOST 31319-2006: Vibration. Measurement and evaluation of human exposure to whole-body vibration. Practical guidance for measurement at the workplace

GOST 3242-79: Welded joints

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5667-65: Bread and bakery products. Rules of acceptance, methods of sampling, methods for determination of organoleptic characteristics and mass

GOST 6465-76: Enamels PF-115. Specifications

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

GOST R 50620-93: Machinery and equipment for bread baking industry. Safety requirements

GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane

GOST R 51838-2001: Safety of machinery. Electrical equipment for industrial machines. Test methods

GOST R IEC 60204-1-2007: Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Seamless hot-deformed steel pipes. Specifications
Language: English
Price: $57.42
imgalt
Seamless hot-deformed steel pipes. Range of sizes
Language: English
Price: $77.22
imgalt
Processing equipment and process pipelines
Language: English
Price: $155.43
imgalt
Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
Language: English
Price: $320.76
imgalt
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
imgalt
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English
Price: $1,478.07
imgalt
Unified system for design documentation. Diagrams. Kinds and types. General requirements for fulfillment.
Language: English
Price: $121.77
imgalt
Chemically resistant and heat resistant ceramic wares. The method for determination of heat resistance
Language: English
Price: $34.65
imgalt
Unified system for program documentation. Types of programs and program documents
Language: English
Price: $55.44
imgalt
Petroleum products. Method of test for water-soluble acids and alkalies
Language: English
Price: $48.51
imgalt
Unified system for design documentation. Repair documents
Language: English
Price: $196.02
imgalt
Chemical production safety passport. General requirements
Language: English
Price: $90.09
imgalt
Unified system for design documentation. Exploitative documents
Language: English
Price: $296.01
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $137.61
imgalt
Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus
Language: English
Price: $223.74
imgalt
Process piping. Standard for the stress, vibration and seismic analysis
Language: English
Price: $879.12
imgalt
Pipeline valves for nuclear stations. General specifications
Language: English
Price: $1,908.72
imgalt
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $703.89
imgalt
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Language: English
Price: $523.71
imgalt
Fish products. Canned tuna and bonito in water or oil
Language: English
Price: $159.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!