GOST R EN 1010-1-2009
ГОСТ Р ЕН 1010-1-2009
|
|
Printing machinery. Safety requirements for the design and construction. Part 1. General requirements
Оборудование полиграфическое. Требования безопасности для конструирования и изготовления. Часть 1. Общие требования
Status: Not effective - Canceled. Registration information 961-st dated 12/13/2011
This standard applies to: - printing machines for printing on paper and similar materials and products from them, including screen printing machines. Equipment used in the preparation of the printing process, and ancillary equipment for printing presses is also assigned to printing presses. This standard also applies to machines and equipment used for the preparation of paper, products, printing plates and inks (before and after printing processes), as well as equipment for washing printing plates and controlling print quality (auxiliary printing equipment); - paper processing machines, i.e. machines for processing, processing and finishing paper, cardboard and other similar materials and products made from them, which are processed, recycled or finished in the same way. This standard does not apply to printing equipment (printing and paper processing machines), manufactured before the date of its entry into force. This standard does not apply to: - Bobbing and sheet cutting machines used in the finishing of paper and paper products (EN 1034-1: 2000 [30], EN 1034-3: 2000 [31], EN 1034-5: 2005 [32 ]); - office pick-up machines with friction samonaklady; - Machines for processing mailings; - packaging filling machines (for example, packaging, filling and closing machines for packaging); - textile printing machines (excluding certain types of printing equipment used for printing on textiles)
Настоящий стандарт распространяется на: - машины печатные для печати на бумаге и подобных материалах и изделиях из них, включая трафаретные печатные машины. Оборудование, применяемое при подготовке печатного процесса, и вспомогательное оборудование к печатным машинам также отнесено к печатным машинам. Настоящий стандарт распространяется также на машины и оборудование, используемые для подготовки бумаги, изделий, печатных форм и краски (до и после печатных процессов), а также оборудование для смывки печатных форм и контроля качества печати (вспомогательное печатное оборудование); - бумагоперерабатывающие машины, т.е. машины для обработки, переработки и отделки бумаги, картона и других подобных материалов и изделий из них, которые обрабатываются, перерабатываются или отделываются аналогичными способами. Настоящий стандарт не распространяется на полиграфическое оборудование (печатные и бумагоперерабатывающие машины), изготовленное до даты введения его в действие. Настоящий стандарт не распространяется на: - машины бобинорезальные и листорезальные, используемые в процессах отделки бумаги и изделий из бумаги (ЕН 1034-1:2000 [30], ЕН 1034-3:2000 [31], ЕН 1034-5:2005 [32]); - машины офисные подборочные с фрикционным самонакладом; - машины для обработки почтовых отправлений; - машины для наполнения упаковки (например, машины для фасовки, наполнения и закрытия упаковки); - текстильные печатные машины (исключая отдельные виды печатного полиграфического оборудования, применяемые для печати на текстильных изделиях)
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/9/2009
SKU: RUSS72457
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.9 Equipment for woodworking, pulp and paper industry and printing »
ISO classifier »
37 TECHNOLOGY OF RECEPTION OF IMAGES »
37.100 Printing technology »
37.100.10 Equipment for reproduction »
National standards »
37 TECHNOLOGY OF RECEPTION OF IMAGES »
37.100 Printing technology »
37.100.10 Equipment for reproduction »
ISO classifier »
85 PULP AND PAPER INDUSTRY »
85.100 Equipment for paper production »
National standards »
85 PULP AND PAPER INDUSTRY »
85.100 Equipment for paper production »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T3 Physics and Mechanics »
T34 Oscillatory and wave-like movements. Bodies vibration. Sound. Acoustics »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 30691-2001: Noise of machines. Declaration and verification of noise emission values
GOST EN 1070-2003: Safety of machinery. Terms and definitions
GOST EN 12626-2006: Safety of metal-working machine tools. Laser processing machines
GOST EN 1760-1-2004: Safety of machinery. Pressure sensitive protective devices. Part 1. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
GOST ISO 13851-2006: Safety of machinery. Two-hand control devices. Functional aspects and design principles
GOST ISO 13855-2006: Safety of machinery. Positioning of protective equipment with respect to the approach speeds of parts of the human body
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication
GOST R 12.2.133-97: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods
GOST R 51317.6.2-2007: Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in industrial environments. Requirements and test methods
GOST R 51334-99: Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs
GOST R 51335-99: Safety of machinery. Minimum gaps to avoid crushing of parts of the human body
GOST R 51336-99: Safety of machinery. Emergency stop equipment. Functional aspects. Principles for design
GOST R 51337-99: Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values for hot surfaces
GOST R 51342-99: Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
GOST R 51343-99: Safety of machinery. Prevention of unexpected start-up
GOST R 51344-99: Safety of machinery. Principles for risk assessment
GOST R 51345-99: Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
GOST R 52319-2005: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST R 52350.0-2005: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements
GOST R 52350.11-2005: Electric equipment for explosive atmospheres. Part 11. Equipment protection by intrinsic safety «i»
GOST R 52350.1-2005: Electrical apparatus for explosive gas atmospheres. Part 1. Flameproof enclosures 'd'
GOST R 52350.14-2006: Electrical apparatus for explosive gas atmospheres. Part 14. Electrical installations in hazardous areas (other than mines)
GOST R 52350.2-2006: Electrical apparatus for explosive gas atmospheres. Part 2. Pressurized enclosures 'р'
GOST R 52350.25-2006: Electrical apparatus for explosive gas atmospheres. Part 25. Intrinsically safe systems
GOST R 52350.5-2006: Electrical apparatus for explosive gas atmospheres. Part 5. Powder filling 'q'
GOST R 52350.6-2006: Electrical apparatus for explosive gas atmospheres. Part 6. Oil-immersion 'o'
GOST R 52350.7-2005: Electrical apparatus for explosive gas atmospheres. Part 7. Increased safety 'e'
GOST R 53479-2009: Printing trades equipment. Methods for determination of noise emission dates. Accuracy grades 2 and 3
GOST R EN 1127-1-2009: Explosive atmospheres. Explosion prevention and protection. Part 1. Basic concepts and methodology
GOST R EN 13463-1-2009: Non-electrical equipment for potentially explosive atmospheres. Part 1. Basic method and requirements
GOST R EN 13463-5-2009: Non-electrical equipment for potentially explosive atmospheres. Part 5. Protection by constructional safety “c”
GOST R IEC 60079-0-2007: Explosive atmospheres. Part 0. Equipment. General requirements
GOST R IEC 60204-1-2007: Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements
GOST R IEC 60825-1-2009: Safety of laser products. Part 1. Equipment classification, requirements and user's guide
GOST R IEC 61241-1-2-99: Electrical apparatus for use in the presence of combustible dust. Past 1:2. Electrical apparatus protected by enclosures and surface temperature limitation. Selection, installation and maintenance
GOST R IEC 61241-14-2008: Electrical apparatus for use in the presence of combustible dust. Part 14. Selection and installation
GOST R IEC 61241-17-2009: Electrical apparatus for use in the presence of combustible dust. Part 17. Inspection and maintenance of electrical installations in hazardous areas (other than mines)
GOST R ISO 12100-1-2007: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terminology, methodology
GOST R ISO 12100-2-2007: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles
GOST R ISO 13849-1-2003: Safety of machinery. Safety-related parts of control systems. Part 1. General principles for design
GOST R ISO 14122-1-2009: Safety of machinery - permanent means of access to machinery. Part 1. Choice of fixed means of access between two levels
GOST R ISO 14122-2-2010: Safety of machinery. Permanent means of access to machinery. Part 2. Working platforms and walkways.
GOST R ISO 14122-3-2009: Safety of machinery. Permanent means of access to machinery. Part 3. Stairs, stepladders and guard-rails.
GOST R ISO 14122-4-2009: Safety of machinery. Permanent means of access to machinery. Part 4. Vertical stairs
The Document is Referenced By:
GOST R EN 1010-2-2011: Printing trades machinery. Safety requirements for the design and construction. Part 2. Printing and varnishing machines including pre-press machinery
GOST R EN 1010-3-2009: Printing machinery. Safety requirements for the design and construction. Part 3. Cutting machines
GOST R EN 1010-4-2011: Printing trades machinery. Safety requirements for the design and construction. Part 4. Bookbinding, paper-converting and finishing machines
GOST R EN 1010-5-2012: Printing machinery. Safety requirements for design and construction. Part 5. Machines for the production of corrugated board and machines for the conversion of flat and corrugated cardboard
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
