GOST R 51161-2002
ГОСТ Р 51161-2002
|
|
Sucker rods, mouth stocks and couplings for them. Specifications
Штанги насосные, устьевые штоки и муфты к ним. Технические условия
Status: Not effective - Canceled. Information on registration 994-st dated 11/21/2012 (the official website of Rosstandart); IUS 10-2013
The standard applies to pump rods (normal length, shortened, weighted), wellhead rods and couplings to them, designed to transfer reciprocating motion from the ground drive of the pumping unit to the piston of a well pump or rotational motion, in the case of screw pumps with oil production. The standard can be used for certification purposes.
Стандарт распространяется на насосные штанги (нормальной длины, укороченные, утяжеленные), устьевые штоки и муфты к ним, предназначенные для передачи возвратно-поступательного движения от наземного привода штанговой насосной установки к плунжеру сква-жинного насоса или вращательного движения, в случае применения винтовых насосов при добыче нефти. Стандарт может быть использован для целей сертификации.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
12/15/2002
SKU: RUSS72512
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.4 Machines and equipment for mining, oil industry and quarrying »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.01 Equipment for oil and gas industry in general »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.01 Equipment for oil and gas industry in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G4 Machinery and equipment for heavy industry »
G43 Machines and equipment for oil producing, oil refining and gas industry »
As a Replacement Of:
GOST R 51161-98: Glass reinforced plastic sucker rods. Specifications
The Document References:
GOST 10243-75: Steel. Methods of test and estimation of macrostructure
GOST 10354-82: Polyethylene film Specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 11708-82: Basic norms of interchangeability. Screw thread. Terms and definitions
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 14192-96: Cargo marking
GOST 14810-69: Plain double-end plug gauges with inserts of diameter over 3 to 50 mm. Design and dimensions
GOST 1497-84: Metals. Methods of tension test
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 15846-79: Products for transportation to the areas of the far north and remote regions
GOST 16493-70: Product quality. Acceptance statistical inspection by attributes when the acceptable number of defectives in sample equals 0
GOST 166-89: Vernier callipers. Specifications
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 21014-88: Rolled products of ferrous metals. Surface defects. Terms and definitions
GOST 2216-84: Adjustable smooth snap gauges
GOST 22235-76: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 24634-81: Wooden boxes for export products. General specifications
GOST 25670-83: Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication
GOST 2590-2006: Round hot-rolled steel bars. Dimensions
GOST 2590-88: Round steel bars. Dimensions
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 3565-80: Metals. Method for torsional test
GOST 4381-87: Lever-type micrometers. General specifications
GOST 4543-71: Structural alloyed steel
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9378-93: Roughness comparison specimens
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST R 51161-98: Glass reinforced plastic sucker rods. Specifications
The Document is Referenced By:
GOST R 55849-2013: Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Part 1. Pumps. General technical requirements
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.