GOST R 55018-2012

ГОСТ Р 55018-2012

Pipeline valves for objects of energetics. General specifications

Арматура трубопроводная для объектов энергетики. Общие технические условия

Status: Effective - Introduced for the first time. IUS 6-2013

This standard applies to pipeline valves and actuators for it (hereinafter referred to as valves) for power engineering facilities (thermal power plants and heat networks) and establishes general requirements for valves during its design, manufacture, acceptance, testing, transportation, storage, operation and repair

Настоящий стандарт распространяется на трубопроводную арматуру и приводные устройства к ней (далее - арматура) для объектов энергетики (тепловых электростанций и тепловых сетей) и устанавливает общие требования к арматуре при ее проектировании, изготовлении, приемке, испытаниях, транспортировании, хранении, эксплуатации и ремонте

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 47

Approved: Federal Agency for Technical Regulation and Metrology, 9/24/2012

SKU: RUSS72518

Price: $626.00

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Surfacing »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Gases »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.1 For energy » 3.1.2 For thermal power »



ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipe fittings » 23.060.01 Pipe fittings in general »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipeline valves » 23.060.01 Pipe fittings in general »

The Document References:

Federal Law 184-FZ: About technical regulation

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications

GOST 12.1.004-91: Fire safety. General requirements

GOST Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.020-76: Explosion proof electrical apparatus. Terms and definitions. Classification. Marking

GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 1215-79: Malleable iron castings

GOST 12521-89: Butterfly valves. Basic parameters

GOST 12678-80: Direct-acting pressure regulators. Main parameters

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 12893-83: Single-seated, double-seated and cage control valves.

GOST 13837-79: General purpose dynamometers

GOST 1412-85: Flakish graphite cast iron

GOST 14187-84: Plug valves. Overroll dimensions

GOST 14192-96: Cargo marking

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions

GOST 16587-71: Safety valves, control valves and pressure regulators. Face-to-face lengths

GOST 17433-80: Industrial purity. Compressed air. Grades of contamination

GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability

GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.601-2013: Unified system for design documentation. Exploitative documents

GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents

GOST 20072-74: Heat-resistant steel

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications

GOST 21357-87: Castings made of cold- and wear- resistant steel

GOST 22445-88: Check valves. Basic parameters

GOST 23866-87: Single-seated, double-seated and cellular

GOST 24570-81: Safety valves of stream and hot-water boilers. Technical requirements

GOST 25923-89: Butterfly control valves. Basic parameters

GOST 27.310-95: Dependability in techniques. Failure mode, effects and criticality analysis. Basic principles

GOST 27477-87: Non-return check valves. Basic parameters

GOST 28289-89: Reverse pipe fittings for thermal power-stations. Types and main parameters

GOST 28291-89: Stop valves for thermal power-stations. Types and main parameters

GOST 28308-89: Gate-type shut-off valves for steam electric stations. Types and main parameters

GOST 28343-89: Flanged steel ball valves

GOST 28908-91: Ball valves and disk gate valves. End-to-end (face-to-face) dimensions

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 3326-86: Stop valves, check lift and swing valves. Overall dimensions

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 3706-93: Gate valves. End-to-end lengths

GOST 4543-71: Structural alloyed steel

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications

GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications

GOST 6527-68: Female ends with pipe cylindrical thread. Dimensions

GOST 7192-89: Constant-speed electrical actuating mechanisms, ssi

GOST 7293-85: Cast iron with globular graphite for foundry

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.908-85: Unified system of corrosion and ageing protection. Metals and alloys. Methods for determination of corrosion and corrosion resistance indices

GOST 9697-87: Stop valves. Main parameters

GOST 9698-86: Gate valves. Main parameters

GOST 9702-87: Play and ball valves. Basic parameters

GOST 977-88: Steel castings. General specifications

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

GOST R 50891-96: Machine reducers. General specifications

GOST R 51317.2.4-2000: Electromagnetic compatibility of technical equipment. Electromagnetic environment. Compatibility levels for low-frequency conducted disturbances in industrial plants

GOST R 51901.12-2007: Risk management. Procedure for failure mode and effects analysis

GOST R 52543-2006: Hydraulic drives. Safety requirements

GOST R 52720-2007: Pipeline valves. Terms and definitions

GOST R 52760-2007: Pipeline valves. Requirements for the marking and distinctive painting

GOST R 52857.1-2007: Vessels and apparatus. Norms and methods of strength calculation. General requirements

GOST R 52857.2-2007: Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindric and conic, shells convex and flat bottoms and covers

GOST R 52857.3-2007: Vessels and apparatus. Norms and methods of strength calculation. Reinforcement of openings in shells and heads under internal and external pressure. Strength calculation of shells and heads under external static loads on the nozzle

GOST R 52857.4-2007: Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints

GOST R 52857.5-2007: Vessels and apparatus. Norms and methods of strength calculation. Calculation of shells and heads from influence of support loads

GOST R 52857.6-2007: Vessels and apparatus. Norms and methods of strength calculation. Strength calculation under low-cyclic loads

GOST R 52869-2007: Pneumatic drives. Safety requirements

GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests

GOST R 53278-2009: Fire equipment. Fire valves. General technical requirements. Test methods

GOST R 53402-2009: Pipeline valves. Methods of control and testing

GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications

GOST R 53674-2009: Pipeline valves. Nomenclature of characteristics. Check-lists for design and order

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 54808-2011: Pipeline valves. Leakage rates of valves.

GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

MU Sanitary and Epidemiological Surveillance over the Water Use in Industrial Water Supply Systems

OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-583-03: Rules for Development, Production and Application of Membranous Safety Equipment

PB 09-540-03: General codes on explosion protection for explosive and fire hazardous chemical, petrochemical plants and oil refineries

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

PB 12-529-03: Gas distribution and gas consumption system safety rules. Series 12. Revision 4.

PB 12-609-03: Safety rules for facilities using liquefied hydrocarbon gases

RD 153-34.0-03.301-00: Fire safety rules for energy enterprises.

RD 153-34.1-26.304-98: Instructions for organization of operating, order and timing for verification of safety devices of boilers at thermal power plants.

RD 153-34.1-39.502-98: Guidelines for Operation and Procedure and Schedule for Checking safety Devices for Vessels, Apparatus, and Piping Systems of Thermal Power Stations

RD 153-34.1-39.504-00: General technical requirements for fittings of CHP plant ( TPP OTT - 2000).

RD 153-34.1-39.603-99: Fittings repair manual of high parameters.

RD 2730.940.103-92: Steam and hot water boilers, steam and hot-water-pipelines. Welding. General requirements.

SanPiN Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. Quality control

SO 34.04.181-2003: Organization of maintenance and repair of equipment, buildings and structures of power plants and networks

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

ST TsKBA 013-2007: Pipe fittings. Welding of fittings to the pipeline. Technical requirements

ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 028-2007: Pipe fittings. Periodic testing. General requirements

ST TsKBA 031-2009: Pipe fittings. Passport. Development and design rules

ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements

ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements

ST TsKBA 082-2009: Pipe fittings. Input control

ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions

The Document is Referenced By:

GOST R 58788-2019: Pipeline fittings of safety class 4 for technological systems of nuclear power plants. General technical requirements

PNST 166-2016: Safety class 4 pipeline valves for technological systems of nuclear stations. General technical requirements

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00


RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!