GOST R 55159-2012

ГОСТ Р 55159-2012

The mountain-mine equipment. Underground loading machines. General technical requirements and test methods

Оборудование горно-шахтное. Машины погрузочные шахтные. Общие технические требования и методы испытаний

Status: Effective - Introduced for the first time. IUS 10-2014

This standard applies to loading shaft machines (hereinafter referred to as machines), made with observance of kinematic unity on a common rigid frame, with electric, electro-hydraulic or pneumatic drive, on a wheel-rail or caterpillar drive, versions of IMb for gas-hazardous mines and (or ) dust, and 1PH for mines that are not hazardous for gas and (or) dust, intended for loading of loosened rock mass into bottom-hole vehicles during underground mining of mineral deposits and underground construction oh structures. This standard establishes general technical requirements for machines and methods for monitoring indicators during testing. The nomenclature of indicators to be monitored when testing a particular type of machine should be determined in accordance with the regulatory documents for this machine. This standard does not apply to machinery containing attachments for performing other non-loading rock mass functions (drilling holes, attaching outcrops in mine workings); machines designed for the destruction of soil rocks, its alignment; loading-hauling machines, loading-stem, special structures, as well as onto machines designed prior to the introduction of this standard

Настоящий стандарт распространяется на погрузочные шахтные машины (далее - машины), выполненные с соблюдением кинематического единства на общей жесткой раме, с электрическим, электрогидравлическим или пневматическим приводом, на колесно-рельсовом или гусеничном ходу, исполнения IMb для шахт, опасных по газу и (или) пыли, и 1РН для шахт, не опасных по газу и (или) пыли, предназначенные для погрузки разрыхленной горной массы в призабойные транспортные средства при подземной разработке месторождений полезных ископаемых и строительстве подземных сооружений. Настоящий стандарт устанавливает общие технические требования к машинам и методы контроля показателей при проведении испытаний. Номенклатуру показателей, подлежащих контролю при испытаниях машины конкретного типа, следует определять в соответствии с нормативными документами на эту машину. Настоящий стандарт не распространяется на машины, содержащие навесное оборудование для выполнения других, не связанных с погрузкой горной массы, функций (бурения шпуров, крепления обнажений в горных выработках); машины, предназначенные для разрушения пород почвы, ее выравнивания; погрузочно-доставочные машины, погрузочно-стволовые, специальных конструкций, а так же на машины, спроектированные до введения настоящего стандарта

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 48

Approved: Federal Agency for Technical Regulation and Metrology, 11/22/2012

SKU: RUSS72519

Price: $607.22

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » Machines and equipment for mining, oil industry and quarrying »

ISO classifier » 73 MINING AND MINERAL PRODUCTS » 73.100 Mining equipment » 73.100.40 Equipment for haulage and lifting »

National standards » 73 MINING AND MINERAL PRODUCTS » 73.100 Mining equipment » 73.100.40 Equipment for haulage and lifting »

The Document References:

GN Maximum allowable concentrations (MACs) of harmful substances in occupational air

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 11223-88: Hard coals and brown coals. Method of sampling by boring holes

GOST 12.0.003-74: Dangerous and harmful production effects. Classification

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements

GOST 12.1.016-79: Work area air

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements

GOST 12.2.064-81: Occupational safety standards system. Controls of industrial equipment. General safety requirements

GOST 12.2.106-85: Occupational safety standards system. Machines and mechanisms for mining of ore, non-ore and placer deposits. General hygienic requirements and methods of testing

GOST 12.2.130-91: Occupational safety standard system. Single-bucket excavators. General safety and ergonomical requirements for the operator's position and methods of their control

GOST 12969-67: Plates for machines and devices. Technical requirements

GOST 12971-67: Rectangular plates for machines and devices. Dimensions

GOST 13837-79: General purpose dynamometers

GOST 14192-96: Cargo marking

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 16514-96: Hydraulic fluid power. Hydraulic cylinders. General technical requirements

GOST 17168-82: Octave and one-third-of-octave electronic filters

GOST 17187-2010: Noise meters Part 1 Technical requirements

GOST 17216-2001: Industrial cleanliness. Grades of liquids purity

GOST 17411-91: Positive-displacement hydraulic drives

GOST 17433-80: Industrial purity. Compressed air. Grades of contamination

GOST 19853-74: Lubricating plugs. Specifications

GOST 19862-87: Pneumatic drives. Methods of measuring parameters

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.602-95: Unified system for design documentation. Repair documents

GOST 21140-88: Containers

GOST 21153.0-75: Rocks. Sampling and general requirements for the methods of physical testing

GOST 21153.1-75: Rocks. Method for the determination of strength factor according to Protodyakonov

GOST 21753-76: Man -machine system control levers

GOST 21889-76: Man-machine system. Operator's arm-chair. General ergonomic requirements

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 23941-2002: Noise of machines. Methods for determination of noise characteristics. General requirements

GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges

GOST 24634-81: Wooden boxes for export products. General specifications

GOST 24754-81: General purpose mining electric equipment

GOST 26568-85: Vibration. Methods and means for protection Classification.

GOST 27518-87: Diagnostics of items. General reguirements

GOST 27720-88: Earth-moving machinery. Drain, fill and level plugs

GOST 28634-90: Earth-moving machinery. Operating instrumentation

GOST 28723-90: Velocity, electromagnetic and vortex flow meters

GOST 29292-92: Earth-moving machinery. Machine mounted forward and reverse audible warning alarm. Sound test method

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 31319-2006: Vibration. Measurement and evaluation of human exposure to whole-body vibration. Practical guidance for measurement at the workplace

GOST 31438.2-2011: Explosive atmospheres. Explosion protection and prevention. Part 2. Basic concepts and methodology (for mining)

GOST 31439-2011: Equipment and components intended for use in potentially explosive atmospheres in underground mines

GOST 31441.1-2011: Non-electrical equipment for potentially explosive atmospheres. Part 1. General requirements

GOST 31441.5-2011: Non-electrical equipment for potentially explosive atmospheres. Part 5. Protection by constructional safety «c»

GOST 31613-2012: Static electricity spark safety. General technical requirements and test methods

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5378-88: Vernier protractors. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 8711-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2. Special requirements for ammeters and voltmeters

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.

GOST 9871-75: Mercury-in-glass electric-contact thermometers

GOST ISO 8041-2006: Vibration. Human response to vibration. Measuring instrumentation

GOST R 1.0-2012: Standardization in the Russian Federation. Basic provisions

GOST R 1.9-2004: Standardization in the Russian Federation. Mark of conformity to national standards of the Russian Federation. Representation. Application order

GOST R 12.4.255-2011: Occupation safety standards system. Personal hearing protective equipment. General technical requirements. Mechanical test methods

GOST R 27.403-2009: Dependability in technics. Compliance tests plans for reliability

GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements

GOST R 51330.20-99: Mining electrical equipment. Insulation, leakage paths and electrical gaps. Technical requirements and testing methods

GOST R 51401-99: Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane

GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane

GOST R 52321-2005: Electricity metering equipment (а.с). Particular requirements. Part 11. Electromechanical meters for active energy (classes 0,5; 1 and 2)

GOST R 52543-2006: Hydraulic drives. Safety requirements

PB 03-428-02: Safety Requirements for Construction of Underground Structures

PB 03-553-03: Uniform Safety Requirements for Underground Development of Ore, Non-Ore, and Placer Mineral Deposits

PB 05-618-03: Coal Mine Safety Regulations

SN 2.2.4/ Noise exposure in work environment, residential premises, premises of public buildings and in dwellings zones

GOST R IEC 60079-0-2011: Explosive atmospheres. Part 0. Equipment. General requirements

The Document is Referenced By:

GOST R 55730-2013: Mining equipment. Loading-transport machines. General technical requirements

GOST R 58493-2019: Mining equipment. Drilling machines. General technical requirements and test methods

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
Aviation gas turbine fuels. Method for determining thermal oxidative stability
Language: English
Price: $473.36
Hazard classification of chemical products. General requirements
Language: English
Price: $356.40
Warning labeling of chemical products. General requirements
Language: English
Price: $613.80
Safety data sheet for chemical products. General requirements
Language: English
Price: $121.77
Hoisting cranes. Rules and test methods
Language: English
Price: $393.39
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25


RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!