GOST 30971-2012
ГОСТ 30971-2012
|
|
Erection to joints of window assemblies adjoined to wall openings. General specifications
Швы монтажные узлов примыкания оконных блоков к стеновым проемам. Общие технические условия
Status: Effective - Supersedes. IUS 12-2014
The standard applies to installation seams in the junction points of window blocks (including balcony) and translucent structures to the openings of the external walls of heated buildings. The standard is used in the development of design and technological documentation for the production of installation work for new construction and reconstruction (including the replacement of window structures in the premises in operation). The requirements of this standard can be applied in the design and construction of the junction points of external doors, gates, stained glass structures and strip glazing. The standard does not apply to all types of hinged facade structures, winter gardens and translucent roofs, as well as to attic window blocks, to special-purpose window blocks in terms of additional requirements for fire safety, protection against hacking.
Стандарт распространяется на монтажные швы в узлах примыканий оконных блоков (включая балконные) и светопрозрачных конструкций к проемам наружных стен отапливаемых зданий. Стандарт применяют при разработке конструкторской и технологической документации на производство монтажных работ при новом строительстве и реконструкции (включая замену оконных конструкций в эксплуатируемых помещениях). Требования настоящего стандарта могут быть применены при проектировании и устройстве узлов примыканий наружных дверей, ворот, витражных конструкций и ленточного остекления. Стандарт не распространяется на все типы навесных фасадных конструкций, зимних садов и светопрозрачных кровель, а также на мансардные оконные блоки, на оконные блоки специального назначения в части дополнительных требований к пожаробезопасности, защите от взлома.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/27/2012
SKU: RUSS72560
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.56 Windows, doors, gates and their appliances »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.50 Doors and windows »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.50 Doors and windows »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh15 Insulating building materials »
As a Replacement Of:
GOST 30971-2002: Erection to joints of window assemblies adjoined to wall openings. General specifications
The Document References:
GOST 10174-90: Polyurethane-foam doors and windows seal strips
GOST 166-89: Vernier callipers. Specifications
GOST 17177-94: Thermal insulating materials and products for building application. Test methods.
GOST 21751-76: Sealants. Determination method of tensile strength, ultimate elongation at break and deformation set after break
GOST 23166-99: Windows. General specifications
GOST 24700-99: Windows of wood with glassing units. Specifications
GOST 25898-83: Building materials and products. Methods of steam-tightness determination
GOST 26254-84: Buildings and structures. Methods of determination of thermal resistance of enclosing structures
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 26433.2-94: System of ensuring geometric parameters accuracy in building. Rules for measuring parameters of buildings and works
GOST 26589-94: Roofing and waterproof mastics. Methods of testing
GOST 26602.2-99: Windows and doors. Methods of determination of air and water transmission
GOST 26629-85: Buildings and structures. Method of thermovision control of enclosing structures of thermal insulation quality
GOST 2678-94: Rolled roofing and waterproof materials. Methods of testing
GOST 27296-87: Sound insulation of enclosing structures
GOST 30494-96: Residential and public buildings. Microclimate parameters for indoor enclosures
GOST 31167-2009: Buildings and structures. Methods for determination of air permeability of building envelopes in field conditions
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8.586.1-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements
GOST R 53338-2009: Vapour-permeable self-expanding and self-adhesive tapes for building application. Specifications
The Document is Referenced By:
GOST 18128-2018: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications
GOST 21519-2022: Window blocks made of aluminum profiles. Technical conditions
GOST 23747-2015: Door blocks of aluminium profiles. Specifications
GOST 30970-2014: Door blocks of polyvinylchloride profiles. Specifications
GOST 30970-2023: Door blocks made of polyvinylchloride profiles. General technical conditions
GOST 31173-2016: Steel doors. Specifications
GOST 31310-2015: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 34378-2018: Translucent enclosing structures. Windows and doors. Installation work execution, check and demands for results of works
GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions
GOST R 56926-2016: Window and balcony constructions of different functional purpose for residential buildings. General specifications
GOST R 57788-2017: Protective blocks for windows and doors in protected premises. General specifications
GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions
GOST R 70075-2022: Sealants for the organization of mounting joints of the joints of window units to the wall openings. Technical conditions
GOST R 70266-2022: Transparent enclosing structures. Sealing of joints to load-bearing structures and wall openings. Rules and control of work performance
GOST R 70448-2022: Translucent enclosing structures in low-rise residential buildings. Rules and control of installation works
GOST R 70726-2023: Modular swimming pools. General technical conditions
R 78.36.033-2013: Application monitoring and comparative analysis of testing various types of window units, blinds, security grilles and glazing. Classification, methods of installation and strengthening of the structure. Guidelines
R 78.36.043-2014: Selection and application of door blocks. Classification, methods of installation and strengthening of the structure. Guidelines
RMD 23-16-2019 St. Petersburg: Recommendations for energy efficiency of residential and public buildings
RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg
SP 426.1325800.2018: Structures front translucent buildings and structures. Design rules
SP 434.1325800.2018: Polystyrene concrete enclosures. Design rules
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
TSN 23-310-2016 BelO: Energy efficiency in residential and public buildings. Design and control standards
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.