imgalt

GOST R 52927-2008

ГОСТ Р 52927-2008

Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications

Прокат для судостроения из стали нормальной, повышенной и высокой прочности. Технические условия

Status: Not effective - Superseded. Information about registration 912-st dated 07/20/2015 (official website of Rosstandart); (IUS 3-2016)

This standard applies to the plate, broadband universal, strip and shaped steel from normal, high and high strength, designed for sea and river vessels, oil and gas platforms, pontoons, moorings and other welded structures (including those operating in arctic conditions) . In terms of the norms of chemical composition, the standard also applies to ingots, blooms, slimes, forged, rolled and cast billets. Rental, intended for the construction of ships and marine technical structures corresponding to the Register class (Russian Maritime Register of Shipping and / or Russian River Register), is supplied under technical supervision of the Register

Настоящий стандарт распространяется на толстолистовой, широкополосный универсальный, полосовой и фасонный прокат из стали нормальной, повышенной и высокой прочности, предназначенный для морских и речных судов, нефтегазодобывающих платформ, понтонов, причалов и других сварных конструкций (в т.ч. работающих в арктических условиях). В части норм химического состава стандарт распространяется также на слитки, блюмы, сутунку, кованые, катаные и литые заготовки. Прокат, предназначенный для постройки судов и морских технических сооружений, соответствующих классу Регистра (Российский морской регистр судоходства и/или Российский речной регистр), поставляют под техническим наблюдением Регистра

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 6/19/2008

SKU: RUSS72570

Price: $793.00



imgalt

The Product is Contained in the Following Classifiers:

Welding regulations » Main materials »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Non-ferrous metals »

Welding regulations » Welding materials » Gases »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.50 Steel sheet products and semi-finished products »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.50 Steel sheet products and semi-finished products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.70 Steel profiles »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.70 Steel profiles »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V2 Carbon steel of ordinary quality (ordinary stock) » V23 Sheets and Stripes »


The Document is Replaced With:

GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications

The Document References:

Federal Law 184-FZ: About technical regulation

GOST 103-76: Hot-rolled steel strip. Dimensions

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium

GOST 14019-2003: Metallic materials. Bend test method

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 1497-84: Metals. Methods of tension test

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19903-74: Hot-rolled steel sheets. Dimensions

GOST 21937-76: Hot-rolled steel unsymmetrical bulb section for shipbuilding. Dimensions

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 26877-91: Metal products

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 28870-90: Steel. Methods tensile tests of rolled thick-plates in the thickness direction

GOST 3647-80: Abrasives. Grain sizing. Graininess and fractions. Test methods

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST 8240-97: Hot-rolled steel channels. Assortment

GOST 82-70: Universal hot-rolled steel wide strips. Dimensions

GOST 8509-93: Hot-rolled steel equal-leg angles. Dimensions

GOST 8510-86: Hot-rolled steel unequal-leg angles. Dimensions

GOST 9235-76: Hot-rolled steel. Symmetrical bulb for shipbuilding. Dimensions

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!