GOST R 54270-2010
ГОСТ Р 54270-2010
|
|
Masts (Poles) for overhead contact line supports of railways. Specifications
Стойки для опор контактной сети железных дорог. Технические условия
Status: Not effective - Canceled. Registration information 1480-st dated 08/08/2013 (official website of Rosstandart)
This standard applies to racks for contact network poles, built on a common network of electrified railways and on railway sidings of enterprises in various climatic conditions. Racks are intended for use as intermediate, transitional and anchor supports of a contact network for sections of direct and alternating current, as well as for supports of rigid crossbars
Настоящий стандарт распространяется на стойки для опор контактной сети, сооружаемых на общей сети электрифицированных железных дорог и на железнодорожных подъездных путях предприятий в различных климатических условиях. Стойки предназначены для применения в качестве промежуточных, переходных и анкерных опор контактной сети для участков постоянного и переменного тока, а также для опор жестких поперечин
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/27/2010
SKU: RUSS72573
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
93 Civil Engineering »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.100 Railway construction »
National standards »
93 CIVIL CONSTRUCTION »
93.100 Railway construction »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh33 Stone, brick, concrete and reinforced concrete structures and parts »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements
GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance
GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing
GOST 10060.3-95: Concretes. Dilatometric rapid method for the determination of frost-resistance
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13837-79: General purpose dynamometers
GOST 13843-78: Rod aluminium wire. Technical conditions
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16338-85: Low-pressure polyethylene. Specifications
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 22266-94: Sulphate-resistant cements. Specifications
GOST 22362-77: Reinforced concrete structures. Methods for determination of reinforcement tensioning force
GOST 2246-70: Welding steel wire. Specifications
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement
GOST 23009-78: Prefabricated concrete and reinforced concrete constructions and products. Symbols (marks)
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 23279-85: Welded reinforcing meshes for reinforced concrete structures and products. General specifications
GOST 23706-93: Direct action analog electrical
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 24211-2008: Admixtures for concretes and mortars. General specifications
GOST 25726-83: Letter and numerical hand stamps. Types and basic dimensions
GOST 26047-83: Building steel structures
GOST 26134-84: Concretes. Ultrasonic method of frost resistance determination
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 31108-2003: General structural Portland clinker cements. Specifications
GOST 380-2005: Common quality carbon steel. Grades
GOST 380-50: Carbon steel, hot-rolled, of ordinary quality. Classification and general specifications
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6433.2-71: Solid electrical insulating materials. Methods for evaluation of electrical resistance at d. c. voltages
GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7348-81: Carbon steel wire for reinforcement of prestressed concrete constructions. Specifications
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 859-2001: Copper. Grades
GOST 8735-88: Sand for construction work. Testing methods
GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance
GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking
GOST 9378-93: Roughness comparison specimens
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 53231-2008: Concretes. Rules for control and assessment of strength
SNiP 2.03.11-85: Corrosion protection of buildings structures
SP 52-102-2004: Pre-stressed concrete structures
The Document is Referenced By:
GOST 32679-2014: Contact line for railway. Technical requirements and control methods
GOST R 54272-2010: Reinforced concrete foundations for overhead contact line supports of railways. Specifications
SP 226.1326000.2014: Power supply of not traction consumers. Rules for design, construction and renovation
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.