GOST R 53328-2009
ГОСТ Р 53328-2009
|
|
Fire fighting technics. Fire extinguishing trucks. General technical requirements. Test methods
Техника пожарная. Основные пожарные автомобили. Общие технические требования. Методы испытаний
Status: Not effective - Canceled. Information about the registration of 650-st from 09/25/2018 (official site of Rosstandart); IUS 12-2018
This standard applies to newly developed and modernized main fire trucks (PA), built on various wheeled chassis, designed to deliver fire fighting personnel, fire extinguishing substances and equipment to the call site and to supply fire extinguishing substances (water, foam, powders, inert gases , other substances and compositions) in the combustion zone. The standard establishes the basic parameters, general technical requirements and test methods of PA, created on the basic automobile chassis with a carrying capacity of up to 12 tons inclusive
Настоящий стандарт распространяется на вновь разрабатываемые и модернизируемые основные пожарные автомобили (ПА), создаваемые на различных колесных шасси, предназначенные для доставки личного состава пожарных подразделений, огнетушащих веществ и оборудования к месту вызова и для подачи огнетушащих веществ (воды, пены, порошков, инертных газов, других веществ и составов) в зону горения. В стандарте устанавливаются основные параметры, общие технические требования и методы испытаний ПА, создаваемых на базовых автомобильных шасси грузоподъемностью до 12 т включительно
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
2/18/2009
SKU: RUSS72643
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
018/2011 TR CU. On safety of wheeled vehicles »
Regulations and standards (to 018/2011 TR CU) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.1 Motor vehicles and equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G8 Machinery and equipment of universal application »
G88 Fire fighting vehicles, equipment and inventory »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 112-78: Meteorological glass thermometers
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.033-81: Occupational safety standards system. Fire safety. Terms and definitions.
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.026-76: Signal colors and safety signs
GOST 13837-79: General purpose dynamometers
GOST 14167-83: Turbine cold water meters
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 17398-72: Pumps. Terms and definitions
GOST 18099-78: Enamels ML-152. Specifications
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 18374-79: Enamels XB-110 and XB-113. Specifications
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 2.602-95: Unified system for design documentation. Repair documents
GOST 20306-90: Motor vehicles. Fuel economy. Test methods
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 21624-81: Motor vehicle maintenance and repair system. Requirements for maintainability of items
GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements
GOST 21753-76: Man -machine system control levers
GOST 21758-81: Motor vehicle maintenance and repair system. Determination of maintainability and reparability characteristics during the tests
GOST 22061-76: Machines and technological equipment. Balance quality grade system. General
GOST 22576-90: Motor vehicles. Speed characteristics. Test methods
GOST 22748-77: Motor vehicles. List of outside dimensions. Methods of measuring
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 2349-75: System 'hook-eye' drawbar couplings for road- and tractor-trailer trains. Basic parameters and dimensions. Technical requirements
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 24297-87: Input inspection of products. General provisions.
GOST 26336-84: Tractors, machinery for agricultural and forestry, powered lawn and garden equipment. System of symbols for designation of operating controls and means of illustration of information. Symbols
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 27258-87: Earth-moving machinery
GOST 27435-87: External noise of motor vehicles. Permissible level and methods of measurement
GOST 28352-89: Couplings for fire-fighting equipment Types, general parameters and dimensions
GOST 30593-97: Motor vehicles. Heating, ventilation and air conditioning systems. Requirements for effeciency and safety
GOST 3940-84: Electrical equipment for vehicles and tractors. General technical requirements
GOST 4.332-85: Product-quality index system. Fire extinguishing trucks. Nomenclature of indices
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 6134-2007: Rotodynamic pumps. Test methods
GOST 6134-87: Rotor-dynamic pumps
GOST 6465-76: Enamels PF-115. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7877-75: Fire pressure rubberised hoses made of synthetic threads. General specifications
GOST 8769-75: Outer lighting devices for automobiles, buses, trolleybuses, tractors, trailers and semitrailers
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.402-80: Metal surface preparation for painting
GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility
GOST 9544-93: Pipeline cut-off valves
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 12.2.144-2005: Occupational safety standards system. Fire-fighting technics. Safety requirements. Test methods
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 41.11-2001: Uniform provisions concerning the type approval of vehicles with regard to door latches and door retention components
GOST R 41.13-2007: Uniform provisions concerning the vehicles of categories M, N and О with regard to braking
GOST R 41.13-99: Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking
GOST R 41.23-99: Uniform provisions concerning the approval of reversing lights for power-driven vehicles and their trailers
GOST R 41.27-2001: Uniform provisions concerning the type approval of advance warning triangles
GOST R 41.3-99: Uniform provisions, concerning the approval of retro-reflecting devices for power-driven vehicles and their trailers
GOST R 41.43-2005: Uniform provisions concerning the safety glazing materials and their installation on vehicles
GOST R 41.43-99: Uniform provisions concerning the approval of safety glazing and glazing material
GOST R 41.48-2004: Uniform provisions concerning the approval of vehicles with regard to the installation of lighting and light-signalling devices
GOST R 41.48-99: Uniform provisions concerning the approval of vehicles with regard to the installation of lighting and light-signalling devices
GOST R 41.4-99: Uniform provisions for the approval of devices for the illumination of rear registration plates of motor vehicles (except motor cycles) and their trailers
GOST R 41.52-2001: Uniform provisions concerning the construction of small capacity public services vehicles
GOST R 41.52-2005: Uniform provisions concerning the categories M2 and M3 small capacity vehicles with regard to their general construction
GOST R 41.65-99: Uniform provisions concerning the approval of special warning lamps for motor vehicles
GOST R 41.6-99: Uniform provisions concerning the approval of direction indicators for motor vehicles and their trailers
GOST R 41.7-99: Uniform provisions concerning the approval of front and rear position (side) lamps, stop-lamps and end-outline marker lamps for motor vehicles (except motor cycles) and their trailers
GOST R 41.87-99: Uniform provisions concerning the approval of daytime running lamps for power-driven vehicles
GOST R 41.91-99: Uniform provisions concerning the approval of side-marker lamps for motor vehicles and their trailers
GOST R 50401-92: Suction gauzes. Specifications
GOST R 50574-2002: Automobiles, buses and motorcycles of emergency services. Colours diagrams, identification symbols, inscriptions, special light and sound signals. General requirements
GOST R 50577-93: Licence plates for vehicles. Types and main sizes. Technical requirements
GOST R 50993-96: Motor vehicles. Heating, ventilation and air conditioning systems. Requirements for efficiency and safety
GOST R 51105-97: Gasoline for combustion engines. Unleaded gasoline. Specifications
GOST R 51206-2004: Motor vehicles. Content of pollutants in the air of passenger compartment and cabin. Norms and test methods
GOST R 51266-99: Automobile transport facilities. Visibility from the driver's seat. Technical requirements. Test methods
GOST R 51318.12-99: Electromagnetic compatibility of technical equipment. Man-made radio disturbance from vehicles, motor boats and internal combustion engine devices. Limits and test methods
GOST R 51616-2000: Motor vehicles. Internal noise. Permissible levels and methods of tests
GOST R 51709-2001: Motor vehicles and their trailers. Safety requirements for technical conditions and methods of inspection
GOST R 51980-2002: Vehicles. Marking. General technical requirements
GOST R 52033-2003: Motor vehicles with petrol engines. Emission of the exhaust gas pollutants. Norms and methods of the control for estimation of technical condition
GOST R 52160-2003: Motor vehicles, equipped with compression ignition engines. Visible pollutants. Norms and methods of the control for estimation of technical condition
GOST R 52231-2004: External noise of motor vehicles. Permissible levels and methods of measurement
GOST R 52280-2004: Trucks. General technical requirements
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
PB 03-576-03: Regulations of design and safe operation of pressure vessels
RD 50-690-89: Methodological instructions. Industrial product dependability. Methods for estimating dependability based on experimental data.
The Document is Referenced By:
Decision 219: The list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of the technical regulations of the Customs Union "On the safety of wheeled vehicles". (TR CU 018/2011), and a list of international and regional (interstate) standards, and in their absence - national (state) standards containing the rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulations of the Customs Union "On the safety of wheeled vehicles" (TR CU 018/2011) (TR CU 018/2011) and conformity assessment of objects of technical regulation
Decision 88: About the Program for the development (amendment, revision) of interstate standards, the application of which on a voluntary basis ensures compliance with the technical regulations of the Customs Union
GOST R 22.9.29-2015: Safety in emergencies. Emergency and rescue vehicles. Test methods
Letter 19950/05-AA: About the application of the standards
Order 1573: The list of national standards and sets of rules, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Order 19950/05-AL: About the application of standards
Order 832: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.