GOST 30766-2001
ГОСТ 30766-2001
|
|
Tins for chemical products. General specifications
Банки металлические для химической продукции. Общие технические условия
Status: Effective - Introduced for the first time
This standard applies to metal cans intended for packaging, transportation and storage of chemical products and products of the petrochemical industry, and establishes the basic technical requirements, acceptance rules, control methods, labeling rules, packaging, transportation and storage of cans. The standard should be applied in the development of regulatory documents on banks for specific types of products. The standard does not apply to household products
Настоящий стандарт распространяется на металлические банки, предназначенные для упаковывания, транспортирования и хранения химических продуктов и продуктов нефтехимической промышленности, и устанавливает основные технические требования, правила приемки, методы контроля, правила маркировки, упаковки, транспортирования и хранения банок. Стандарт должен применяться при разработке нормативных документов на банки для конкретных видов продукции. Стандарт не распространяется на изделия хозяйственного и бытового назначения
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Russian Federation for Standardization and Metrology,
10/22/2002
SKU: RUSS72695
The Product is Contained in the Following Classifiers:
Welding regulations »
Welding work »
Welding regulations »
Welding materials »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Welding materials »
Solders »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
005/2011 TR CU. O packaging safety »
Norms and standards (to TR TS 005/2011) »
ISO classifier »
55 PACKAGING AND DISTRIBUTION OF GOODS »
55.140 Barrels. Drums. Canisters »
National standards »
55 PACKAGING AND DISTRIBUTION OF GOODS »
55.140 Barrels. Drums Canisters »
National Standards for KGS (State Standards Classification) »
Latest edition »
D Vehicles and packaging »
D8 Metal containers »
D81 Metal boxes, buckets and cans »
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.3.020-80: Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
GOST 13078-81: Sodium glass liquid. Technical conditions
GOST 13345-85: Tin-plate and black plate
GOST 13841-95: Corrugated board boxes for chemical products. Specifications
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15878-79: Resistance welding. Welded joints. Design elements and dimensions
GOST 15895-77: Statistical quality control. Terms and definitions
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 166-89: Vernier callipers. Specifications
GOST 17305-91: Wire of carbon construction steel
GOST 17527-86: Package. Terms and definitions
GOST 18242-72: Statistical acceptance inspection by alternative feature inspection plans
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 18573-86: Wooden boxes for the production of chemical industry
GOST 19433-88: Dangerous goods. Classification and marking
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 21140-88: Containers
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 21931-76: Tin-lead solders in the form of products. Specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 24373-80: Making of metal cans for conserve. Terms and definitions
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 26319-84: Dangerous cargoes
GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements
GOST 3242-79: Welded joints
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 40.9001-88: Quality sistems. Model for guality assurance in design/development, production, installation and servicing
GOST 40.9002-88: Quality sistems. Model for guality accurance in production and installation
GOST 40.9003-88: Quality systems. Model for guality accurance in final inspection and test
GOST 6467-79: Vulcanized rubber cords of round and square cross-sections. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.402-80: Metal surface preparation for painting
GOST 9078-84: Flat pallets
GOST 9557-87: Flat wooden pallets with dimensions 800ґ1200 mm
GOST 9980.3-86: Paint materials. Packing
GOST R 50779.10-2000: Statistical methods. Probability and general statistical terms. Terms and definitions
GOST R 50779.11-2000: Statistical methods. Statistical quality control. Terms and definitions
GOST R 50779.71-99: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
GOST R ISO 9001-2001: Quality management systems. Requirements
GOST R ISO 9002-96: Quality systems. Model for quality assurance in production, installation and servicing
GOST R ISO 9003-96: Quality system. Model for quality assurance in final inspection and test
The Document is Referenced By:
GOST 18188-72: Solvents of grades 645, 646, 647, 648 for paint materials. Specifications
GOST 20799-2022: Industrial oils. Technical conditions
GOST 7827-74: Solvents of grades P-4, P-4A, P-5, P-5A, P-12 for paint materials. Specifications
GOST 9980.3-2014: Materials of paint and varnish and auxiliary, raw materials for paint and varnish materials. Packing
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.